• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.53.1-53.6
• /
• 2019

Background: The nasal bone is the most protruding bony structure of the facial bones. Nasal bone fracture is the most common facial bone fracture. The high rate of incidence of nasal bone fracture emphasizes the need for systematical investigation of epidemiology, surgical techniques, and complications after surgery. The objective of this study is to investigate the current trends in the treatment of nasal bone fractures and the effectiveness of closed reduction depending on the severity of the nasal bone fracture. Patients and methods: A total of 179 patients with a nasal bone fracture from 2009 to 2017 were enrolled. Their clinical examination, patient's records, and radiographic images of nasal bone fractures were evaluated. Results: Patients ranged from children to elderly. There were 156 (87.2%) males and 23 (12.8%) females. Traffic accident (36.9%) was the most common cause of nasal fracture. Orbit fracture (44 patients, 24.6%) was the most common fracture associated with a nasal bone fracture. Complications after surgery included postoperative deformity in 20 (11.2%) patients, nasal obstruction in 11 (6.1%) patients, and olfactory disturbances in 2 (1.1%) patients and patients with more severe nasal bone fractures had higher rates of these complications. Conclusion: Closed reduction could be performed successfully within 2 weeks after injury.

• 대한치과의사협회지
• /
• 제50권6호
• /
• pp.329-338
• /
• 2012

Introduction: The purpose of this study is to evaluate the clinical results of vertical alveolar ridge augmentation using autogenous block bone graft, especially resorption rate, and outcomes of dental implants placed in the grafted site. Patients and Methods: Medical records and radiographs were reviewed. Twenty-seven patients who have been received the autogenous block bone graft which harvested from chin, ramus, and ilium, and the implant installation on 31 areas(22 maxillas and 9 mandibles) were included. Eight implants were installed simultaneously at the time of bone graft in 4 patients, and 65 implants were installed after 4.9 months(range 2~18 months) of autogenous block bone graft in 23 patients. The resorption amount and rate of augmented bone, and the success and survival rates implants were evaluated. Results: Mean height of the augmented block bone was $5.9{\pm}2.3mm$(range from 2.5 to 13.0 mm). Mean follow-up period after block bone graft was 30.4 months(range from 16 to 55 months). Mean resorption of the augmented block bone was $2.0{\pm}1.5mm$ (range from 0.5 to 7.24 mm). The success and survival rates of the implants were 78.1 % and 98.6%, respectively. Conclusion: This study indicates that the autogenous block bone graft is a useful and stable method for alveolar ridge augmentation for dental implant. And more augmentation is needed to compensate the resorption of the grafted bone.

• 대한치과의사협회지
• /
• 제53권1호
• /
• pp.28-35
• /
• 2015

To overcome shortcoming of autogeneous, allogenic, xenogenic and alloplastic bone grafts, various growth factors related to bone regeneration have been identified and developed. Among them, rhBMP-2 is regarded as the most potent osteoinductive growth factor and it can trigger the differentiation of mesenchymal stem cells to osteogenic cells for accelerated new bone formation And several commercial products of rhBMP-2 are available in Korea. It is applied to maxillary sinus augmentation, guided bone regeneration and preservation of extraction socket. In this review, the development, action mechanism and clinical applications of rhBMP-2 will be described.

• Journal of International Society for Simulation Surgery
• /
• 제3권2호
• /
• pp.90-92
• /
• 2016

Horizontal bone defect in the anterior maxilla makes it difficult to place dental implant. The golden standard for bone augmentation is autogenous block bone graft. Tight contact with recipient site and rigid fixation are two key factors for successful block bone graft. Ramal bone graft has been the most reliable methods for dental implant field. However, the curvature of the alveolar ridge is different from ramal bone shape. Intraoperative trimming of ramal bone is cumbersome for surgeon. In this technical note, a simple way to design the ramal bone harvest using bone wax stent is reviewed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권6호
• /
• pp.469-477
• /
• 2009

육안적 검사결과 실험군과 대조군 모두에서 특별한 염증 소견이나 창상 이개 없이 반원 모양의 골형성이 관찰되었다. 조직학적으로 3주째에 대조군, 실험 1군, 실험2군, 실험 3군 모두 이식골 주위 및 티타늄 반구 내면을 따라 신생 골형성이 관찰되었다. 조직학적으로 6주째에 모든 군에서 3주째에 비하여 신생골 면적의 증가 및 성숙 소견이 관찰되었고, 실험2군에서는 부분적으로 이식골이 흡수되면서 신생골이 형성되는 것이 관찰된 반면, 실험 3군에서는 이식골의 흡수 소견이 관찰되지 않았다. 조직형태계측학적으로 3주, 6주 모두 자가골에서 가장 많은 신생골 형성이 나타났고, 신생골 면적 비교시 자가골, 이종골, 합성골 순으로 크게 나타났고, 각 군간의 통계학적으로 유의한 차이는 없었다(p>0.05). 본 연구결과 골유도 재생술시 골형성 능력은 자가골이 가장 좋지만, 자가골 채취가 불가능할 경우, 적절한 차폐막을 사용한 합성골과 이종골 복합 이식방식도 좋은 대체제가 될 것으로 생각된다.

• Journal of Korean Dental Science
• /
• 제1권1호
• /
• pp.10-14
• /
• 2008

The fracture of facial bone usually accompanies alveolar bone fracture and dislocation or fracture of teeth. Thus, aside from the reduction of fracture, the reconstruction of occlusion through the rehabilitation of lost teeth should be considered. The dislocation of tooth after trauma accompanying alveolar bone fracture needs bone grafting in case of implant treatment. Although autogenous bone graft shows good prognosis, it has the disadvantage of requiring a secondary surgery. This is a case of a mandibular condyle head fracture accompanied by alveolar bone fracture. The condylar head fragment removed during open reduction was grafted to the alveolar bone fracture site, thereby foregoing the need for secondary surgery.

• Journal of Periodontal and Implant Science
• /
• 제53권3호
• /
• pp.218-232
• /
• 2023

Purpose: This study evaluated the efficacy of a tube-shaped poly(ε) caprolactone - β tricalcium phosphate (PCL-TCP) scaffold with the incorporation of human umbilical cord-derived mesenchymal stem cells (hUCMSCs) and platelet-rich plasma (PRP) for bone regeneration in the procedure of single-stage sinus augmentation and dental implantation in minipigs. Methods: Implants were placed in the bilateral sides of the maxillary sinuses of 5 minipigs and allocated to a PCL-TCP+hUCMSCs+PRP group (n=5), a PCL-TCP+PRP group (n=5), and a PCL-TCP-only group (n=6). After 12 weeks, bone regeneration was evaluated with soft X-rays, micro-computed tomography, fluorescence microscopy, and histomorphometric analysis. Results: Four implants failed (2 each in the PCL-TCP+hUCMSCs+PRP and PCLTCP+hUCMSC groups). An analysis of the grayscale levels and bone-implant contact ratio showed significantly higher mean values in the PCL-TCP+hUCMSCs+PRP than in the PCL-TCP group (P=0.045 and P=0.016, respectively). In fluoromicroscopic images, new bone formation around the outer surfaces of the scaffolds was observed in the PCLTCP+hUCMSCs+PRP group, suggesting a tenting effect of the specially designed scaffolds. Bone regeneration at the scaffold-implant interfaces was observed in all 3 groups. Conclusions: Using a tube-shaped, honeycombed PCL-TCP scaffold with hUCMSCs and PRP may serve to enhance bone formation and dental implants' osseointegration in the procedure of simultaneous sinus lifting and dental implantation.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제39권6호
• /
• pp.274-282
• /
• 2013

Objectives: The posterior maxillary region often provides a limited bone volume for dental implants. Maxillary sinus elevation via inserting a bone graft through a window opened in the lateral sinus wall has become the most common surgical procedure for increasing the alveolar bone height in place of dental implants in the posterior maxillary region. The purpose of this article is to assess the change of bone volume and the clinical effects of dental implant placement in sites with maxillary sinus floor elevation and autogenous bone graft through the lateral window approach. Materials and Methods: In this article, the analysis data were collected from 64 dental implants that were placed in 24 patients with 29 lacks of the bone volume posterior maxillary region from June 2004 to April 2011, at the Department of Oral and Maxillofacial Surgery, Inha University Hospital. Panoramic views were taken before the surgery, after the surgery, 6 months after the surgery, and at the time of the final follow-up. The influence of the factors on the grafted bone material resorption rate was evaluated according to the patient characteristics (age and gender), graft material, implant installation stage, implant size, implant placement region, local infection, surgical complication, and residual alveolar bone height. Results: The bone graft resorption rate of male patients at the final follow-up was significantly higher than the rate of female patients. The single autogenous bone-grafted site was significantly more resorbed than the autogenous bone combined with the Bio-Oss grafted site. The implant installation stage and residual alveolar height showed a significant correlation with the resorption rate of maxillary sinus bone graft material. The success rate and survival rate of the implant were 92.2% and 100%, respectively. Conclusion: Maxillary sinus elevation procedure with autogenous bone graft or autogenous bone in combination with Bio-Oss is a predictable treatment method for implant rehabilitation.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제48권2호
• /
• pp.85-93
• /
• 2022

Objectives: The aim of this study was to compare morbidities and duration of surgery, as well as bone formation in alveolar defects reconstructed with symphysis bone combined with allograft and iliac crest bone graft in patients with cleft palate. Patients and Methods: This randomized clinical trial was performed with 22 patients with unilateral alveolar cleft with a follow-up period of 12 months. In 12 patients, alveolar defects were reconstructed with chin bone graft plus allograft (Group A), while for the other 10 patients, iliac bone crest was used as donor site (Group B). Duration of surgery as well as occurrence of morbidities and complications were recorded. In addition, cone-beam computed tomographic (CBCT) scans were performed before surgery and 12 months after surgical procedures in order to compare bone formation between the two groups. Results: Postoperative CBCT demonstrated a mean bone fill percentage of 76.9% of the alveolar defect in Group A, compared with 77.0% in Group B. Paresthesia in the lower lip or chin did not occur in any patients of Group A. The mean duration of the surgical process was significantly shorter for Group A (40 minutes vs 76 minutes, P<0.001). In addition, patients in Group A regained normal gait faster than patients in Group B (1 day vs 9.5 days). Conclusion: Mandibular symphysis bone graft in combination with allograft results in favorable outcomes in patients with unilateral alveolar clefts.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.38.1-38.9
• /
• 2018

Background: Fibrous dysplasia (FD) is a benign bone lesion characterized by the progressive replacement of normal bone with fibro-osseous connective tissue. The maxilla is the most commonly affected area of facial bone, resulting in facial asymmetry and functional disorders. Surgery is an effective management option and involves removing the diseased bone via an intraoral approach: conservative bone shaving or radical excision and reconstruction. Case presentation: This case report describes a monostotic fibrous dysplasia in which the patient's right midface had a prominent appearance. The asymmetric maxillary area was surgically recontoured via the midfacial degloving approach under general anesthesia. Follow-up photography and radiographic imaging after surgery showed the structures were in a stable state without recurrence of the FD lesion. Furthermore, there were no visible scars or functional disability, and the patient reported no postoperative discomfort. Conclusions: In conclusion, the midfacial degloving approach for treatment of maxillary fibrous dysplasia is a reliable and successful treatment option. Without visible scars and virtually free of postoperative functional disability, this approach offers good exposure of the middle third of the face for treatment of maxillary fibrous dysplasia with excellent cosmetic outcomes.