• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.215-226
• /
• 2015

In this study, with variables the cross section area ($97m^2$, $58m^2$, $38m^2$) and the wind velocity(0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5 m/s), the time of getting off train dependent on the way of itself and the width of the evacuation route was analyzed, and also fire and evacuation characteristics is reviewed by cross section area of each wind velocity. As the result, if cross section become smaller, the density of harmful gases in the tunnel increased more than the ratio of decreasing cross section area. In the case of small cross sectional area, the surrounding environment from initial fire is indicated to exceed the limit criteria suggested in performance based design. In the analysis of effective evacuation time for evacuation characteristics, the effective evacuation time was the shortest in the case of evaluating effective evacuation time by the visibility. Also, there was significant difference between the effective evacuation time on the basis of performance based evaluation and the effective evacuation time obtained by analyzing FED (Fractional effective dose), one of the analysis method obtaining the point that deaths occur, against harmful gases.

• The Plant Pathology Journal
• /
• v.32 no.2
• /
• pp.112-122
• /
• 2016

Virus-induced gene silencing (VIGS) is an effective tool for the study of soybean gene function. Successful VIGS depends on the interaction between virus spread and plant growth, which can be influenced by environmental conditions. Recently, we developed a new VIGS system derived from the Soybean yellow common mosaic virus (SYCMV). Here, we investigated several environmental and developmental factors to improve the efficiency of a SYCMV-based VIGS system to optimize the functional analysis of the soybean. Following SYCMV: Glycine max-phytoene desaturase (GmPDS) infiltration, we investigated the effect of photoperiod, inoculation time, concentration of Agrobacterium inoculm, and growth temperature on VIGS efficiency. In addition, the relative expression of GmPDS between non-silenced and silenced plants was measured by qRT-PCR. We found that gene silencing efficiency was highest at a photoperiod of 16/8 h (light/dark) at a growth temperature of approximately $27^{\circ}C$ following syringe infiltration to unrolled unifoliolate leaves in cotyledon stage with a final SYCMV:GmPDS optimal density $(OD)_{600}$ of 2.0. Using this optimized protocol, we achieved high efficiency of GmPDS-silencing in various soybean germplasms including cultivated and wild soybeans. We also confirmed that VIGS occurred in the entire plant, including the root, stem, leaves, and flowers, and could transmit GmPDS to other soybean germplasms via mechanical inoculation. This optimized protocol using a SYCMV-based VIGS system in the soybean should provide a fast and effective method to elucidate gene functions and for use in large-scale screening experiments.

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.790-797
• /
• 2011

Hydrodynamic similarity was analyzed by employing scaling factor in three phase fluidized beds. The scaling factor was defined based on the holdups of gas, liquid and solid particles and effectivity volumetric flux of fluids between the two kinds of fluidized beds with different column diameter. The column diameter of one was 0.102 m and that of the other was 0.152 m. Filtered compressed air, tap water and glass bead of which density was 2,500 kg/$m^3$ were used as gas, liquid and solid phases, respectively. The individual phase holdups in three phase fluidized beds were determined by means of static pressure drop method. Effects of gas and liquid velocities and particle size on the scaling factors based on the holdups of each phase and effective volumetric flux of fluids were examined. The deviation of gas holdup between the two kinds of three phase fluidized beds decreased with increasing gas or liquid velocity but increased with increasing fluidized particle size. The deviation of liquid holdup between the two fluidized beds decreased with increasing gas or liquid velocity or size of fluidized solid particles. The deviation of solid holdup between the two fluidized beds increased with increasing gas velocity or particle size, however, decreased with increasing liquid velocity. The deviation of effective volumetric flux of fluids between the two fluidized beds decreased with increasing gas velocity or particle size, but increased with increasing liquid velocity. The scaling factor, which was defined in this study, could be effectively used to analyze the hydrodynamic similarity in three phase fluidized processes.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1638-1643
• /
• 2018

Multi-layer ceramic capacitors as decoupling capacitor were fabricated by dielectric composition with a high dielectric constant. The fabricated decoupling capacitors were embedded in the PCB of the 10G RF transceiver module and evaluated for the characteristics of electrical noise by the level of AC input voltage. In order to further improve the electrical properties of the $BaTiO_3$ based composite, glass frit, MgO, $Y_2O_3$, $Mn_3O$, $V_2O_5$, $BaCO_3$, $SiO_2$, and $Al_2O_3$ were used as additives. The electrical properties of the composites were determined by various amounts of additives and optimum sintering temperature. As a result of the optimized composite, it was possible to obtain a density of $5.77g/cm^3$, a dielectric constant of 1994, and an insulation resistance of $2.91{\times}10^{12}{\Omega}$ at an additive content of 5wt% and a sintering temperature of $1250^{\circ}C$. After forming a $2.5{\mu}m$ green sheet using the doctor blade method, a total of 77 layers were laminated and sintered at $1180^{\circ}C$. A decoupling capacitor with a size of $0.6mm(W){\times}0.3mm(L){\times}0.3mm(T)$ (width, length and thickness, respectively) and a capacitance of 100 nF was embedded using a PCB process for the 10G RF Transceiver modules. In the range of AC input voltage 400mmV @ 500kHz to 2200mV @ 900kHz, the embedded 10G RF Transceiver modules evaluated that it has better electrical performance than the non-embedded modules.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.1
• /
• pp.51-66
• /
• 2001

The purpose of this study is to suggest the ecological management based on ecological characteristics of urban forest in Bucheon city. The actual vegetation area in the survey sites(7,426,587$m^2$) consisted of Robinuia pseudoacacia forest(61.6%; 5,574,168 $m^2$), Pinus rigida forest(6.1%), Quercus mongolica community(3.2%), Q.spp.community(2.9%), etc. According to the importance value of artificial planting forest, 58(/300$m^2$) survey plots were divided into 6 groups; 1) R. pseudoacacia forest, 2) R. pseudoacacia-Q.serrata community, 3) R. pseudoacacia-Q.mongolica community, 4) P.rigide forest, 5) P.rigida-Q.serrata community, 6) P.rigida-Q. mongolica community. As the result, the artificial planting forest was expected to the proceeded to Q. serrata community and Q.mongolica community. The ecological succesion stage in the survey sites (7,426,587$m^2$) was divided into 5 states based on actual vegetation, succession trend of artificial planting forest in Bucheon; 1) Stage of impossible succession(4.7%, 2)Stage of inducible succession(78.7%), 3) Stage of progressive succession(2.7%), 4)Sage of last succession(1.4%), 5)Stage of native plant forest(12.5%). The ecological management of urban forest was suggested as the management method for succession promotion, according to density controlling and native species planting in Bucheon. Individual numbers of R. pseudoacacia might be reduced to 6~8 individuals/300$m^2$ at canopy, 9~21 individuals/300$m^2$ at under-story by selective cutting in order to keep 63~70% of total basal area at R. pseudoacacia forest. Individual numbers of P.rigida might be reduced to 8~9 individuals/300$m^2$ at canopy, 27~30individuals/300$m^2$ at under-story by selective cutting in order to keep 68~75% of total basal area at P. rigida forest. 24 species that were selective by constancy analysis were chosen as the ecological appropriate species. Since, this studyis discussing the ares of urban forest and botanical ecology, it is suggested that a study on the relations between of environmental factors such as soil, climate, and vegetation will be performed in the future.

• Korean Journal of Oriental Medicine
• /
• v.16 no.1
• /
• pp.119-134
• /
• 2010

Objectives & Method：Based on the statistic from January 2008 to December 2008 include 66-year-old 375 people (159 men, 216 women) who got examined in National Health Insurance Corporation, this study set a goal to establish a new health index by analyzing the relation between the cardio-cerebra vascular disease and risk factor such as obesity, smoking, exercise, alcohol consumption, blood pressure, blood sugar and cholesterol. Results：1) Examine results, health status according to gender；People who are diagnosed as abnormal health status have higher risk for both men and women. As for the detailed diseases, high blood pressure was highest followed by hyperlipidemia and obesity. In case of the women, 96.3% in bone mineral density was highest. 2) Correlation of disease and health risk factors based on gender；Correlation of disease according to gender in the obesity(p<0.001), lipid abnormalities(p<0.001), kidney diseases(p<0.001), chest diseases(p<0.05), osteoporosis(p<0.001) showed a statistically significant difference. The analysis showed that the men have more obesity and lipid abnormalities as well as thoracic disease than the women, but the women have more kidney disease than the men. As for the osteoporosis examine which is conducted only for the women, most of the women were abnormal even though it cannot compare the result according to gender. Obesity(p<0.001), alcohol(p<0.001), smoking(p<0.001) and LDLcholesterol(p<0.001) showed statistical correlation between gender and health risk factor. And only high blood pressure(p<0.001) showed a statistical correlation between gender and risk of cardio-cerebra vascular disease. 3) Risk of cardio-cerebra vascular disease related to health risk factor characteristic；Obesity assessment(p<0.001), alcohol(p<0.05), smoking(p<0.05), blood pressure(p<0.001), glucose(p<0.001) showed correlation between health risk factor and stroke. Drinking(p<0.001), smoking(p<0.05), exercise(p<0.001), blood pressure(p<0.001), LDL cholesterol(p<0.001) showed health risk factor and myocardial infarction. Obesity assessment(p<0.001), smoking(p<0.05), blood pressure(p<0.001), glucose(p<0.001) and showed correlation between health risk factor and diabetes. Obesity assessment(p<0.001), blood pressure(p<0.001) showed correlation between health risk factor and high blood pressure. Conclusion：Therefore, we have to take one step farther after the health examination. In order to prevent and reduce the risk of disease, people have to understand their health status exactly first, and correct their habit with recognizing the amount of risk related to cardio-cerebra vascular disease.

• Journal of Preventive Medicine and Public Health
• /
• v.35 no.2
• /
• pp.99-106
• /
• 2002

Objective : Until now, there have been no evidence-based guidelines produced for the mass screening of hyperlipidemia cases in Korea. This study was done to find the most efficient strategy for a hyperlipidemia-screening program among Korean adults, Method : Seven alternative strategies for hyperlipidemia screening were formulated and compared ir terms of cost-effectiveness. Cost and effectiveness were estimated from social perspectives and using a two-stage screening process (initial testing and additional testing for positives from the first test). A computerized database (based on persons who had visited a health promotion center in one teaching hospital for a routine health check-up) was used to determine the cost and the outcome of various strategies. Official data was used in calculating direct and indirect costs. Effectiveness was measured according to the number of persons who needed clinical intervention for hyperlipidemia. A stratified analysis, considering age group and sex, was then done. Sensitivity analyses, focusing on several uncertain parameters, were also done. Results : Of the seven test alternatives available, the most cost-effective strategy was a screening program, which consisted of an initial test of total cholesterol, high-density lipoprotein cholesterol and triglyceride. There was some variation in the rank of the cost-effectiveness ratios for the seven alternatives dependent on age group or gender. Conclusions : Current hyperlipidemia screening practice, for National Health Insurance beneficiaries, tests only the total cholesterol level with a cut-off value of 260mg/dl as an initial screening test. It is not the best strategy for cost-effectiveness, and should be modified. Different screening strategies taking age group and sex into account should be developed and used for the efficient mass screening of hyperlipidemia cases among Korean adults.

• Korean Journal of Remote Sensing
• /
• v.15 no.1
• /
• pp.9-20
• /
• 1999

The use of climatic information is essential in the industial society. More specialized weather servies are required to perform better industrial acivities including agriculture. Especially, crop models require daily weather data of crop growing area or cropping zones, where routine weather observations are rare. Estimates of the spatial distribution of daily climates might complement the low density of standard weather observation stations. This study was conducted to estimate the spatial distribution of daily minimum and maximum temperatures in Korean Peninsula. A topoclimatological technique was first applied to produce reasonable estimates of monthly climatic normals based on 1km $\times$ 1km grid cell over study area. Harmonic analysis method was then adopted to convert the monthly climatic normals into daily climatic normals. The daily temperatures for each grid cell were derived from a spatial interpolation procedure based on inverse-distance weighting of the observed deviation from the climatic normals at the nearest 4 standard weather stations. Data collected from more than 300 automatic weather systems were then used to validate the final estimates on several dates in 1997. Final step to confirm accuracy of the estimated temperature fields was comparing the distribution pattern with the brightness temperature fields derived from NOAA/AVHRR. Results show that differences between the estimated and the observed temperatures at 20 randomly selected automatic weather systems(AWS) range from -3.$0^{\circ}C$ to + 2.5$^{\circ}C$ in daily maximum, and from -1.8$^{\circ}C$ to + 2.2$^{\circ}C$ in daily minimum temperature. The estimation errors, RMSE, calculated from the data collected at about 300 AWS range from $1.5^{\circ}C$ to 2.5$^{\circ}C$ for daily maximum/minimum temperatures.

• Korean Journal of Optics and Photonics
• /
• v.26 no.2
• /
• pp.73-82
• /
• 2015

This work demonstrates the indoor SI-traceable calibration of a transmissometer with a 75-m baseline for the measurement of visibility in MOR (Meteorological Optical Range). The calibration is performed using a set of neutral density (ND) filters (OD 0.1-2.5) and a set of high-transmission quartz glass plates (a bare quartz glass plate and antireflective-coated quartz glass plates), the collection consisting of 20 artifacts in total. The luminous transmittance values of the reference artifacts had been calibrated traceable to the KRISS spectral transmittance scale, which ranges from 0.2 % to 99.5 %. The transmissometer to be calibrated typically consists of a loosely collimated light source based on a white LED (CCT ~5000 K) and a luminous intensity detector with a CIE 1924 V(${\lambda}$) spectral response. As a result of calibration, we obtained the MOR error and its uncertainty for the transmissometer in 20 m - 40 km of MOR. Based on the results, we investigated the applicability of the calibration method and the conformity of the transmissometer to the ICAO's (International Civil Aviation Organization) accuracy requirement for meteorological visibility measurement. We expect that this work will establish the standard procedure for the SI-traceable calibration of a transmissometer.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.485-492
• /
• 2021

The wind turbines with a rated capacity of 50kW or less are generally considered as small class. Small wind turbines are an attractive alternative for off-grid power system and electric home appliances, both as stand-alone application and in combination with other energy technologies such as energy storage system, photovoltaic, small hydro or diesel engines. The research objective is to develop the 50kW scale wind turbine blades in ways that resemble as closely as possible with the construction and methods of utility scale turbine blade manufacturing. The mold process based on wooden form is employed to create a hollow, multi-piece, lightweight design using carbon fiber and fiberglass with an epoxy based resin. A hand layup prototyping method is developed using high density foam molds that allows short cycle time between design iterations of aerodynamic platforms. A production process of five blades is manufactured and key components of the blade are tested by IEC 61400-23 to verify the appropriateness of the design. Also, wind system with developed blades is tested by IEC 61400-12 to verify the performance characteristics. The results of blade and turbine system test showed the available design conditions for commercial operation.