• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.2077-2082
• /
• 2015

Based on Deutsch assumption, a calculation method on the electric field over the ground surface under HVDC transmission lines in the wind is proposed. Analyzing the wind effects on the electric field and the space charge density the existing method based on Deutsch assumption is improved through adding the wind speed to the ion flow field equations. The programming details are illustrated. The calculation results at zero wind speed are compared with available data to validate the code program. Then the ionized fields which resulted from corona of ±800kV HVDC lines are analyzed. Both the electric field and the current density on the ground level are computed under different wind direction and speed. The computation results are in good agreement with measurements. The presented method and code program can be used to rapidly predict and evaluate the wind effects in HVDC transmission engineering.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.9
• /
• pp.847-854
• /
• 2014

The paper presented a method of early fire detection based on the environmental characteristics inside the nacelle of wind turbine generator system(WTGS). The rising rates of the temperature and smoke density were used as the parameters for early fire detection. By considering the characteristics of temperature and smoke density of a nacelle, this method is very reliable and can minimize the possibility of a malfunction of fire detection. The performance of the method was tested through sets of experiments by using nacelle simulator.

• Economic and Environmental Geology
• /
• v.28 no.4
• /
• pp.433-438
• /
• 1995

The most popular minimization method is based on the least-squares criterion, which uses the $L_2$ norm to quantify the misfit between observed and synthetic data. The solution of the least-squares problem is the maximum likelihood point of a probability density containing data with Gaussian uncertainties. The distribution of errors in the geophysical data is, however, seldom Gaussian. Using the $L_2$ norm, large and sparsely distributed errors adversely affect the solution, and the estimated model parameters may even be completely unphysical. On the other hand, the least-absolute-deviation optimization, which is based on the $L_1$ norm, has much more robust statistical properties in the presence of noise. The solution of the $L_1$ problem is the maximum likelihood point of a probability density containing data with longer-tailed errors than the Gaussian distribution. Thus, the $L_1$ norm gives more reliable estimates when a small number of large errors contaminate the data. The effect of outliers is further reduced by M-fitting method with Cauchy error criterion, which can be performed by iteratively reweighted least-squares method.

• Korean Journal of Agricultural Science
• /
• v.39 no.2
• /
• pp.183-187
• /
• 2012

Specimens of five softwood species were heat-treated at three temperature levels of $170^{\circ}C$, $190^{\circ}C$ and $210^{\circ}C$. Their FSP's were measured by the volumetric Swelling Method. Within a species the FSP decreases as the temperature of heat treatment increases. The FSP's of the controls range from 21.0% to 32.5%, while those of the specimens heat-treated at $210^{\circ}C$ from 18.7% to 35.3%. There was no difference of basic density between the heat-treated and control specimens.

• Computers and Concrete
• /
• v.21 no.6
• /
• pp.741-748
• /
• 2018

In this paper, the sensitivity of a plastic-damage-based structural damage index on mesh density is studied. Multiple finite element meshes with increasing density are used to investigate their effect on the damage index values calculated from nonlinear finite element simulations for a reinforced concrete column subjected to cyclic loading. With the simulation results, this paper suggests a correction method for the objective damage index based on nonlinear regression of volumetric tensile damage ratio data. The modified damage index values are presented in the quasi-static cyclic simulation to show the efficacy of the suggested correction method.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.4 no.2
• /
• pp.143-152
• /
• 2000

As muscular contraction is sustained, the Fourier spectrum of the myoelectric signal is shifted toward the lower frequency. This spectral density is associated with muscle fatigue. This paper describes a quantitative measurement method that performs the measurement of localized muscle fatigue by tracking changes of median frequency based on stationary wavelet transform. Applying to the human masseter muscle, the proposed method offers the much information for muscle fatigue, comparing with the conventional FFT-based method for muscle fatigue measurement.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.37-45
• /
• 2010

This paper proposes a novel contrast enhancement method which determines the stretching ranges based on the distribution densities of segmented sub-histogram. In order to enhance the quality of image effectively, the contrast histogram is segmented into sub-histograms based on the density in each brightness region. Then the stretching range of each sub-histogram is determined by analysing its distribution density. The higher density region is extended wider than lower density region in the histogram. This method solves the over stretching problem, because it stretches using density rate of each area on the histogram. To evaluate the performance of the proposed algorithm, the experiments have been carried out on complex contrast images, and its superiority has been confirmed by comparing with the conventional methods.

• Journal of Astronomy and Space Sciences
• /
• v.41 no.1
• /
• pp.35-42
• /
• 2024

Sungrazing comets, known for their proximity to the Sun, are traditionally classified into broad groups like Kreutz, Marsden, Kracht, Meyer, and non-group comets. While existing methods successfully categorize these groups, finer distinctions within the Kreutz subgroup remain a challenge. In this study, we introduce an automated classification technique using the densitybased spatial clustering of applications with noise (DBSCAN) algorithm to categorize sungrazing comets. Our method extends traditional classifications by finely categorizing the Kreutz subgroup into four distinct subgroups based on a comprehensive range of orbital parameters, providing critical insights into the origins and dynamics of these comets. Corroborative analyses validate the accuracy and effectiveness of our method, offering a more efficient framework for understanding the categorization of sungrazing comets.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.4
• /
• pp.72-78
• /
• 1997

A free space transmission method using standard gain horn antennas in the frequency range from 9.0 to 10.5GHz is applied to determine the dielectric properties of grain such as rough rice ,brown rice and barley. The dielectric constant and loss factor, which depend on the moisture content of the wetted grain are obtained from the measured attenuation and phase shift by vector network analyzer. The moisture content of grain varied from 11 to 25% based on this wetted condition. The measured values of dielectric constants as a function of moisture density are compared with values of those obtained using he predicted model for estimating dielectric constants of grain. The effect of density fluctuation, high is an important parameter governing the dielectric properties of grain, on the dielectric constant and loss factor is presented. A new density-independent model in terms of measured attenuation an moisture density is proposed of reducing the effects of density fluctuation on the moisture content measurement.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.spc1
• /
• pp.214-222
• /
• 2006

Dominant species of macrobenthos were analyzed based on differentiation of three distinct methods: the density based method, the biomass based method and LeBris method, by considering the frequency of occurrence using quantitative data collected over 5 years (1993-1998) at 21 stations in Chonsu Bay. Sedimentary environments as well as species composition and diversity showed the spatial and temporal distribution patterns. The ranks of dominant species as determined by the density based method were more similar to the results by the LeBris method than to those from the biomass based method. Considering the temporal variation, LeBris method were more efficient than any other methods for the determination of dominant species in Chonsu Bay. Lumbrineris longifolia, Theora fragilis, and Moerella jedoensis were recognized by all three methods. A one-way analysis of variance indicated spatial distributions patterns among most of the dominant species. These species showed positive correlations to sedimentary parameters such as mean grain size. However, T. fragilis and Paraprinospio pinnata showed the temporal patterns in their distribution, and were also correlated to the benthic environment, organic content and dissolved oxygen. Some dominant species, e.g., T. fragilis, S. scutata, G. gurjanovae proved to be useful benthic indicators based on the environmental variations determinated by long-term benthic ecological monitoring in Chonsu Bay.