• Geomechanics and Engineering
• /
• 제17권3호
• /
• pp.271-278
• /
• 2019

In recent years, the crack accidents of earth and rockfill dams occur frequently. It is urgent to study the tensile strength and tensile failure mechanism of the gravelly soil in the core for the anti-crack design of the actual high earth core rockfill dam. Based on the self-developed uniaxial tensile test device, a series of uniaxial tensile test was carried out on gravelly soil with different gravel content. The compaction test shows a good linear relationship between the optimum water content and gravel content, and the relation curve of optimum water content versus maximum dry density can be fitting by two times polynomial. For the gravelly soil under its optimum water content and maximum dry density, as the gravel content increased from 0% to 50%, the tensile strength of specimens decreased from 122.6 kPa to 49.8 kPa linearly. The peak tensile strain and ultimate tensile strain all decrease with the increase of the gravel content. From the analysis of fracture energy, it is proved that the tensile capacity of gravelly soil decreases slightly with the increasing gravel content. In the case that the sample under the maximum dry density and the water content higher than the optimum water content, the comprehensive tensile capacity of the sample is the strongest. The relevant test results can provide support for the anti-crack design of the high earth core rockfill dam.

• 근관절건강학회지
• /
• 제16권2호
• /
• pp.105-115
• /
• 2009

Purpose: The purpose of this study was to investigate whether college women would change their exercise and milk intake behavior after the bone mineral density (BMD) test, and to understand the influencing factors in the exercise & milk intake behavioral change. Method: A questionnaire survey which assesses the exercise and m ilk intake behavior was carried out to the 194 college women from June, 2007 to August, 2007, then they had BMD test in the distal radius site. One year later, 146 women have done a similar questionnaire including osteoporosis know ledge, osteoporosis self efficacy, exercise and milk efficacy, and their health belief. Results: The group that had begun regular exercises after the BMD test showed the lowest level of BMD and exercise barrier. And the other group that had been taking exercises before the test, showed the highest osteoporosis self efficacy, exercise efficacy and osteoporosis sensitivity. As for the behavioral change related to milk intake, only the group that had started to intake a cup of milk a day showed the lowest BMD. Conclusion: This study shows that the BMD testing can induce the behavioral change of exercise and milk intake in college women.

• 한국의류학회지
• /
• 제20권6호
• /
• pp.1107-1115
• /
• 1996

An investigation made of the easing contraction ratio according to sewing condition (seam line; wp, wf, 45$^{\circ}$ bias, stitch density; 13 stitch/cm (0.8 mm), 9 stitch/cm (1.1 mm), 6.5 stitch/ cm (1.5 mm), 5 stitch/cm (2 mm), 4 stitch/cm (2.5 mm), thread; sp 60$^{\circ}$s/2, sp 60$^{\circ}$s/3, st 60$^{\circ}$s/3, st 50$^{\circ}$s/3)) by lockstitch industrial sewing machine with shirring foot. The correlations of the easing and sewing conditions were by SPSS PC), and visual test was done by enlarged photo. The results obstained were as follows:. 1. The easing contraction ratio is increased in proportion to the low of stitch density. 2. The easing contraction ratio of wp, 45$^{\circ}$ bias is correlated with stitch density, and that of wf be with stitch density, elongation & weight. 3. The easing contraction ratio of 13 stitch/cm (0.8 mm), 9 stitch/cm (1.1 mm), 6.5 stitch/ cm (1.5 mm), 5 stitch/cm (2.0 mm) is correlated with flexible rigidity, and that of 4 stitch/ cm (2.5 mm) be with flexible rigidity and crease-resistance. 4. As a results of SPSS PC+ statistics, the easing contraction ratio is statistically correlated to the seam line, stitch density, upper thread tension, and fabric characteristics. 5. As a results of visual test by the enlarged photo, the limit of stitch density for easing contraction was 5 stitch/cm (2.0 mm).

• 한국표면공학회지
• /
• 제50권4호
• /
• pp.266-271
• /
• 2017

In this study, the corrosion resistance of Zn-3wt.%Mg coating was enhanced by controlling the density of coating. During the deposition the substrate temperature was controlled via an intermittent deposition process, resulting in the improvement of coating density. The maximum substrate temperature during this intermittent deposition process could be controlled from $200^{\circ}C$ to $80^{\circ}C$, depending upon the number of coating layer. The density of Zn-3 wt.%Mg coating increased from 76.1 % to 95.8 % as the substrate temperature was controlled. The salt spray test results revealed that the corrosion resistance of Zn-Mg coated steel could increase 3 times by increasing the density in coatings, while adhesion strength of coating was not changed significantly during 0-T bending test.

• 한국지반공학회지:지반
• /
• 제13권2호
• /
• pp.125-136
• /
• 1997

화강풍화토지반(SP)의 밀도와 함수비 그리고, 점성토지반(ML)의 함수비 변화가 불도저 궤도 차량의 주행성능에 미치는 영향을 알아보기 위하여, 강원도 춘천군 역골지역에서 실물크기의견 인력시험을 실시하였다. 시험결과로부터, 최적견인력거동은 함수비 뿐만아니라 밀도에도 크게 영향을 받음을 알았다. 또한, 본 연구에서는 지반상태에 따라서 변하는 견인력거동의 최적점 결정방법을 제안하였으며, 화강풍화토지반의 밀도에 따른 최적견인력과 최적슬립을 구하였다.

• 한국해양공학회지
• /
• 제32권4호
• /
• pp.261-271
• /
• 2018

In this study, a hydraulic model test, to which Particle Image Velocimetry (PIV) system applied, was used to determine the hydrodynamic characteristics of the advection-diffusion of saltwater according to bottom conditions (impermeable/permeability, diameter, and inclination) and the difference of the initial salt. Considering quantitative and qualitative results from the experiment, the characteristics of the density current were discussed. As an experimental result, the advection-diffusion mechanism of salinity was examined by the shape of saltwater wedge and the flow structure of density currents with various bottom conditions. The vertical salt concentration obtained from the experiment was used as quantitative data to calculate the diffusion coefficient that was used in the numerical model of the advection-diffusion of saltwater.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.175-176
• /
• 2014

Recently, in the apartment house of our country, office building, apartment, and etc, the lightweight composite panel is much used as the partition wall body. This is due to be very convenient when the execution and dismantling is convenient and it forms the space which the consumer in the space desires. Therefore, in this research, the thermal conductivity property of the lightweight composite panel core according to the replacement ratio variation of the pearlite tries to be analyze. As the density test result and replacement ratio of the pearlite increased, the density showed the tendency to rise. the replacement ratio of the pearlite increased, the absorption rate showed the tendency to fall. And this is determined that absorption rate is degraded due to the increase in the density. the thermal conductivity test result and pearlite replacement ratio increased, the tendency that the thermal conductivity increases was represented.

• Journal of Ginseng Research
• /
• 제8권2호
• /
• pp.167-171
• /
• 1984

Soft X-ray is useful to identify the quality of fresh ginseng causing the inside cavity or white pan of red ginseng. The portion of low mass density identified by the difference in absorption of soft X-ray showed lower dry matter density and less or no response to iodine test indicating less accumulation or excess consumption of starch. The inside white part of red ginseng absorbed less X-ray than the normal part did. Probability for identification of the inside cavity or white at fresh ginseng was rather high (80-90%) in screen observation than f'3m reading and seemed to be increased further by using the developed screen and with training. The inside white of red ginseng appeared to be due to starch deficiency. Dry matter density appeared to be better than fresh weight density for the quality criterion.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.43-43
• /
• 2022

This study was carried out to investigate planting density suitable for technology that can produce a lot of small seed potatoes to machine sowing, the test material was made of less than 3 g of seed potatoes, and planting density was 75×10, 75×15, 75×20cm. the results of the test study were as follows, number of potatoes per 10a and number of potatoes under 50 g were the most 75×10cm in 2sowing methods. In view of these results, planting density suitable for technology that can produce a lot of small seed potatoes to machine sowing is judged 75×10cm in 2sowing methods. In order for this study to be applied in the agricultural field, cultivation management such as adequate water supply will be required.

• Communications for Statistical Applications and Methods
• /
• 제19권3호
• /
• pp.495-500
• /
• 2012

We consider a Bayesian test of independence in a two-way contingency table that has some zero cells. To do this, we take a three-stage hierarchical Bayesian model under each hypothesis. For prior, we use Dirichlet density to model the marginal cell and each cell probabilities. Our method does not require complicated computation such as a Metropolis-Hastings algorithm to draw samples from each posterior density of parameters. We draw samples using a Gibbs sampler with a grid method. For complicated posterior formulas, we apply the Monte-Carlo integration and the sampling important resampling algorithm. We compare the values of the Bayes factor with the results of a chi-square test and the likelihood ratio test.