• Toxicological Research
• /
• v.13 no.3
• /
• pp.251-256
• /
• 1997

Toluene inhalation increases glutamate level and its receptor in various brain regions. In this study, nitric oxide synthase (NOS) activities were investigated in various rat brain regions using NADPH diaphorase staining method which examined histochemical changes of NOS in the neural cells. Also, in vitro LDH leakage assay and MTT test were performed to investigate the toxic influences of toluene in cultured granule cell of rat cerebellum which was significantly affected with toluene in vivo. Rats were exposed to toluene of 10000 ppm for 3 days. 7 days and 14 days by 20 min $\times$ 2 times a day. NADPH diaphorase staining was processed in the different brain regions after inhalation. NADPH diaphorase staining density was not significantly changed at 3 days inhalation group, but the density decreased in proportion to the duration of toluene inhalation. Over 30% of staining density was decreased at 14 days group which was maximum duration of inhalation in this study. The tendency of staining density decrease was significant in granule cell of cerebellum. Cell death by toluene exposure was observed in cultured cerebellar granule cell. $EC_{50}$ measured with LDH leakage assay and MTT test were 43 mM and 72 mM respectively.

• Journal of muscle and joint health
• /
• v.8 no.2
• /
• pp.278-286
• /
• 2001

With the aging of society a great deal of interest is being placed on the value of longitudinal data in evaluating physiological losses. We present data on test-one/test-two reliability and reproducibility for measures of training, bone density from a longitudinal study of master athletes. Fifty-two males (mean age at test $1=58.2{\pm}9.8\;years$) and thirty-two females ($54.4{\pm}8.8\;years$) were selected from the study population. Bone mineral density was determined using DEXA (Hologic 1500). The characteristics of the subjects are presented below as $means\;{\pm}\;S.D$. The data was imported into the Statistical Package for the Social Science (SPSS 9.0, Chicago, IL). Paired t-tests were performed between visit 1 and visit 2 in subjects. Pearson correlations were performed. The results of this study indicate the measures of training history, body mass and bone density are reasonably stable and reproducible. We conclude that body composition and bone density parameters are stable and reproducible over time in active older subjects. Physiologic measures in master athletes are fairly stable, and reproducible over time Longitudinal studies investigating age-related changes in master athletes need to be conducted on a time schedule of greater than two years.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.6
• /
• pp.1508-1512
• /
• 2009

This study was designed to analyze the results of bone mineral density test in oriental medical examination. The subjects were workers in the automobile manufacturing industry. The subjects consisted of 3,206 industrial workers who had received oriental medical examination by oriental medicine and they submitted questionnaires about drinking history and smoking history, during 9 months from March to November. They were categorized by sex, age, job class, drinking history, smoking history and exercise history. The T-scores were measured by using OSTEOPRO(BMTECH, Seoul, Korea). We analyzed the relationship between sex, age, job class, drinking history, smoking history, exercise history and the results of bone mineral density using X2-test of the SPSS Ver. 14.0. There was a positive correlation between age and osteoporosis prevalence. In job class, sales personnel were apt to have a higher prevalence of osteoporosis than factory workers and office workers. Osteoporosis rates of the drinker group showed a higher level than the non-drinker group. Bone mineral densities of non-smoker group were higher than the Smoker group. And bone mineral densities of exerciser group were higher than the non-exerciser group. They have to encourage exercise and educate the workers to quit smoking for their health promotion. Furthermore, continuous health check up needs to be done connectedly.

• Transactions of Materials Processing
• /
• v.21 no.4
• /
• pp.228-233
• /
• 2012

In this study, powder compaction of AZO (alumina doped zinc oxide) powder was performed with a MTS 810 test system using a cylindrical die having a diameter of 10mm. Pressure-density curves were measured based on the load cell and displacement of the punch. The AZO powder compacts with various densities were formed to investigate the mechanical properties such as fracture stress of the AZO powder as a function of the compact density. Two types of compression tests were conducted in order to estimate the fracture stress using different loading paths: a diameteral compression test and a uniaxial compression test. The pressure-density curves of the AZO powder were obtained and the fracture stress of the compacted powders with various densities was estimated. The results show that the compact pressure dramatically increases as the density increases. Based on the experimental results, calibration of the modified Drucker-Prager/Cap model of the AZO powder for use in FE simulations was developed.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.115-127
• /
• 2019

The low-flow grouting injection technique, the target construction method for this study, is a method of pouring mortar into the ground by non-emission replacement principle, which can be expected to increase the density of the ground, and, in some cases, be used as a base file using the strength of the high injection solids, along with low noise, low pollution, and high durability. To verify that the dynamic characteristics of the ground are improved by the low-flow injection technique, the test work was conducted on the site and physical tests were performed, and the quality of the improvement formed in the ground was verified through the indoor test on the core and core recovery rate was analyzed. The density logs test layer calculated the volume density of the ground layer by using the Compton scattering of gamma-rays, and the sonic logs was tested on the ground around the drill hole using a detector consisting of sonar and receiver devices inside the drill hole. As a result of the measurement of the change in physical properties (density and sonic logs) before and after grouting, both properties were basically increased after infusion of grout agent. However, the variation in density increase was greater than the increase in speed after grouting, and the ground density measurement method was thought to be effective in measuring the fill effect of the filler. Strength and core recovery rates were measured from specimens taken after the age of 28 days, and the results of the test results of the diffusion and strength test of the improved products were verified to satisfy the design criteria, thereby satisfying the seismic performance reinforcement.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.6
• /
• pp.69-76
• /
• 2007

The sands which use for soil improvement of soft ground at coastal area contain more or less amount of shells. In this research the effects of shell contents on the liquefaction resistance of the shelly sand were studied. NGI cyclic simple shear tests were performed for the shell-sands with shell contents of 0%, 5%, 10%, 20%, 30% under the effective vertical stress of 50kPa, 100kPa and 150kPa for 40% and 55% of relative density, respectively. Cyclic simple shear test results showed that for the low effective vertical stress, the liquefaction resistance increased rapidly with increase of shell contents in both 40% and 55% relative density. On the other hand, for the high effective vertical stress, the liquefaction resistance increased slightly in 40% relative density and was almost same in 55% relative density. Liquefaction resistance decreased with increasing effective vertical stress for both 40% and 55% relative density. In the same effective vertical stress and shell contents, liquefaction resistance increased with the increase of relative density.

• Journal of Power Electronics
• /
• v.5 no.4
• /
• pp.257-263
• /
• 2005

This paper describes the development and testing results of a high density High Voltage Power Supply (HVPS) that drives microwave Traveling Wave Tubes (TWTs) of phased array transmitters for airborne EW systems. The HVPS is designed to consist of a number of modules connected in series. Among them, especially, the high-density pulse transformer module including the resonant circuit is newly designed to make the HVPS much more reliable. In addition, this paper describes the development of high voltage solid-state modulation using fast switching devices (FETs) and also represents the test results of a modulator module.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.548-554
• /
• 2016

Optimal range of soil physical quality to enhance crop productivity or to improve environmental health is still in dispute for the upland soil. We hypothesized that the optimal range might be established by comparing soil physical parameters and their interactions inhibiting crop growth. The parameter identifying optimal range covered favorable conditions of aeration, permeability and root extension. To establish soil physical standard two experiments were conducted as follows; 1) investigating interactions of bulk density and aeration porosity in the laboratory test and 2) determining effects of soil compaction and deep & conventional tillage on physical properties and crop growth in the field test. The crops were Perilla frutescens, Zea mays L., Solanum tuberosum L. and Secale cereael. The saturated hydraulic conductivity, bulk density from the root depth, root growth and stem length were obtained. Higher bulk density showed lower aeration porosity and hydraulic conductivity, and finer texture had lower threshold bulk density at 10% aeration bulk density. Reduced crop growth by subsoil compaction was higher in silt clay loam compared to other textures. Loam soil had better physical improvement in deep rotary tillage plot. Combined with results of the present studies, the soil physical quality was possibly assessed by bulk density index. Threshold subsoil bulk density as the upper value were $1.55Mg\;m^{-3}$ in sandy loam, $1.50Mg\;m^{-3}$ in loam and $1.45Mg\;m^{-3}$ in silty clay loam for optimal soil physical quality in upland.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.6
• /
• pp.81-95
• /
• 2011

This study investigates relative density test of standard sand and bottom ash which were devided into No.40, No.60, No.100, No.200 and resonant column tests were conducted for samples with the relative density of 40%, 55%, and 70% on the basis of the test results. Resonant column tests were also conducted for each residual bottom ash which contains the passing sample of No.200 with the relative density of 55%. By compressing each residual sample with the compaction energy of A-compact mold test, the passing percentage of No.200 sieve increased up to 30%, which led to the adjustment of relative density to 10%, 20%, and 30%. Test results show that maximum shear modulus and damping ratio of bottom ash are smaller than those of standard sand because crushing strength and unit weight of the former are smaller than those of the latter.

• Journal of the Korean Data and Information Science Society
• /
• v.4
• /
• pp.137-146
• /
• 1993

The Proposed goodness-of-fit test Statistic $\hat{\lambda}_{\alpha}$ derived from the test Statistc in Kim (1992) is itself a smoothing parameter which is selected to minimize an estimated MISE for a truncated series estimator, $d_{\hat{\lambda}{n}}$, of the comparison density function. Therefore, this test statistic leads immediately to a point estimate of the density function in the event that $H_{0}$ is ejected. The limiting distribution of $\hat{\lambda}_{\alpha}$ was obtained under the null hypothesis. It is also shown that this test is consistent against fixed alternatives.