• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.4
• /
• pp.688-702
• /
• 1999

The purpose of this study was to investigate the revascularization and reinnervation of calcitonin gene-related peptide immunoreactive nerves in immediately replanted rat molars. First maxillary right molars in 56 rats(35days old) were extracted and immediately replanted. The rats were killed 1, 2, 3, 7, 14, 28 and 42 days after replantation and revascularization of pulpal blood vessels were examined microangiogram with korean traditional ink and reinnervation of pulpal nerve were examined immunohistochemical method using calcitonin gene-related peptide(CGRP) antiserum. The results were as follows; 1. Revascularization and reinnervation of CGRP immunoreactive nerve fibers were observed mesial side whole pulp tissue of replanted teeth. Revascularization and reinnervation of CGRP immunoreactive fiber were made at 2days after replantation in entire pulp of replanted teeth and the distribution density of blood vessels were gradually increased according time elapsed, but did not achieve the density of control. 2. Postoperative dentin formation in replanted teeth revealed at 1week after replantaton and gradually increased according to time elapsed. 3. Revascularization and Reinnervation of CGRP immunoreactive nerve fibers were established at the same time and it seems to be closed relatationship between revascularization and reinnervation.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.198-203
• /
• 2012

Salting-out technique was adopted to crystallize dye crystals from dye solution. In this research solubility of dye solution and crystallization kinetics of Reactive dye (RB-8, RB-49, RR-218) was investigated. The empirical expressions of salting-out crystallization kinetics for Reactive dye (RB-8, RB-49, RR-218) in continuous MSMPR crystallizer was RB-8 in crystal growth kinetics $G=7.1{\times}10^{-4}{\Delta}C^{0.67}$ and nucleation kinetics $B^0=3.1{\times}10^{15}{\Delta}C[1.2{\times}10^{-8}+{\Delta}C^{0.7}M_T{^2}]$, RB-49 in crystal growth kinetics $G=5.2{\times}10^{-4}{\Delta}C^{0.3441}$ and nucleation kinetics $B^0=7.2{\times}10^{15}{\Delta}C[3.3{\times}10^{-8}+({\Delta}C)^{0.7}M_T{^2}]$, RR-218 in crystal growth kinetics $G=4.4{\times}10^{-4}{\Delta}C^{0.2361}$ and nucleation kinetics $B^0=6.3{\times}10^{15}{\Delta}C[7.9{\times}10^{-8}+({\Delta}C)^{0.7}M_T{^2}]$. Also, comparison of calculated crystal size distribution applying to characteristic curve method with experimental crystal size showed good agreement.

• Journal of Korean Society of Forest Science
• /
• v.90 no.1
• /
• pp.36-42
• /
• 2001

Changes in breeding bird community and forest structure by thinning were investigated from April 1997 to August 1998 in 10ha ($400{\times}250m$) of temperate mixed hardwood forest in Mt. Gariwang which is located in National Forest, Pyoungchang, Kangwon Province, Korea. Bird community was surveyed by the territory mapping method and forest structure was done by analyzing the vertical structure of foliage, distribution of diameter at breast height (DBH) of trees and tree species composition. After the thinning, tree density, number of tree species and basal area were decreased from 195ea/ha, 18 species and 6.69 $m^2/ha$ into 100ea/ha, 13 species and 3.04 $m^2/ha$, respectively. Foliage coverages in upper and mid layer were decreased, but coverage in low layer was increased. Large trees (Over 40cm of DBH) were decreased. Number of breeding bird species and pairs were decreased from 14 species and 23 pairs into 8 species and 12 pairs after the thinning. Number of breeding pairs of Yellow-breasted bunting Emberiza elegans incresed. There were decrease in number of species in hole & bush-nesting and canopy & bush-foraging guild. The results suggested that the thinning affect the species composition of breeding bird community and the forest structure. Changes of habitat structure might influence in breeding bird's density, species diversity and habitat using pattern of breeding bird community.

• Korean Chemical Engineering Research
• /
• v.57 no.4
• /
• pp.525-530
• /
• 2019

The performance and stability of solid oxide fuel cells (SOFCs) depend on the microstructure of the electrode and electrolyte. In anode, porosity and pore distribution affect the active site and fuel gas transfer. In an electrolyte, density and thickness determine the ohmic resistance. To optimizing these conditions, using costly method cannot be a suitable research plan for aiming at commercialization. To solve these drawbacks, we made high performance unit cells with low cost and highly efficient ceramic processes. We selected the NiO-YSZ cermet that is a commercial anode material and used facile methods like die pressing and dip coating process. The porosity of anode was controlled by the amount of carbon black (CB) pore former from 10 wt% to 20 wt% and final sintering temperature from $1350^{\circ}C$ to $1450^{\circ}C$. To achieve a dense thin film electrolyte, the thickness and microstructure of electrolyte were controlled by changing the YSZ loading (vol%) of the slurry from 1 vol% to 5 vol. From results, we achieved the 40% porosity that is well known as an optimum value in Ni-YSZ anode, by adding 15wt% of CB and sintering at $1350^{\circ}C$. YSZ electrolyte thickness was controllable from $2{\mu}m$ to $28{\mu}m$ and dense microstructure is formed at 3vol% of YSZ loading via dip coating process. Finally, a unit cell composed of Ni-YSZ anode with 40% porosity, YSZ electrolyte with a $22{\mu}m$ thickness and LSM-YSZ cathode had a maximum power density of $1.426Wcm^{-2}$ at $800^{\circ}C$.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.1
• /
• pp.112-125
• /
• 2021

Marine spatial planning(MSP) designates the marine as nine kinds of use zones for the systematic and rational management of marine spaces. One of them is the fishery protection zone, which is necessary for the sustainable production of fishery products, including the protection and fosterage of fishing activities. This study intends to quantitatively identify the fishing activity space, one of the elements necessary for the designation of fisheries protection zones, by mapping of fishery activities using V-Pass data and deriving the fishery activity concentrated zone. To this end, pre-processing of V-Pass data was performed, such as constructing a dataset that combines static and dynamic information, calculating the speed of fishing vessels, extracting fishing activity points, and removing data in non-fishing activity zone. Finally, using the selected V-Pass point data, a fishery activity map was made by kernel density estimation, and the concentrated space of fishery activity was analyzed. In addition, it was confirmed that there is a difference in the spatial distribution of fishing activities according to the type of fishing vessel and the season. The pre-processing technique of large volume V-Pass data and the mapping method of fishing activities performed through this study are expected to contribute to the study of spatial characteristics evaluation of fishing activities in the future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.12
• /
• pp.963-969
• /
• 2021

The wind data measured from local meteorological masts is used to evaluate wind speed distribution and energy production in the specified site for wind farm However, wind data measured from meteorological masts often contain missing information or insufficient desired height or data length, making it difficult to perform wind turbine control and performance simulation. Therefore, long-term continuous wind data is very important to assess the annual energy production and the capacity factor for wind turbines or wind farms. In addition, if seasonal influences are distinct, such as on the Korean Peninsula, wind data with seasonal characteristics should be considered. This study presents methodologies for generating synthetic wind that take into account fluctuations in both wind speed and direction using the hidden Markov model, which is a statistical method. The wind data for statistical processing are measured at Maldo island in the Kokunnsan-gundo, Jeonbuk Province using the Automatic Weather System (AWS) of the Korea Meteorological Administration. The synthetic wind generated using the hidden Markov model will be validated by comparing statistical variables, wind energy density, seasonal mean speed, and prevailing wind direction with measurement data.

• Journal of Surface Science and Engineering
• /
• v.41 no.5
• /
• pp.240-244
• /
• 2008

Composite plating is a method of co-deposition of plating layer with metallic and/or non-metallic particles to improve the plating layer properties such as high corrosion resistance and photolysis of organic compounds. The properties of nickel-ceramic composite plating are significantly depend on the surface characteristics of co-deposited particles as well as the quantity in electrolyte. In this study, Ni-$TiO_2$ composite coating layer was produced by electrodeposition technique from non-aqueous eletrolyte and its surface characteristics as well as photolytic properties were investigated. The amounts of immobilized $TiO_2$ particles increased with increasing the initial $TiO_2$ particles contents in the bath. Samples electroplated with the current density of $0.5\;A/dm^2$ showed the significantly improved homogeneous $TiO_2$ particles distribution. The corrosion resistance of Ni-$TiO_2$ composite coating layer also improved with increaing the amounts of $TiO_2$ particles. Etched sample showed about 10% increased photolytic rate of organic matter compare to that of the non-etched.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3068-3073
• /
• 2007

Aerodynamic forces and moments have been used to control rocket propelled vehicles. If control is required at very low speed, Those systems only provide a limited capability because aerodynamic control force is proportional to the air density and low dynamic pressure. But thrust vector control(TVC) can overcome the disadvantages. TVC is the method which generates the side force and roll moment by controlling exhausted gas directly in a rocket nozzle. TVC is classified by mechanical and fluid dynamic methods. Mechanical methods can change the flow direction by several objects installed in a rocket nozzle exhaust such as tapered ramp tabs and jet vane. Fluid dynamic methods control the flight direction with the injection of secondary gaseous flows into the rocket nozzle. The tapered ramp tabs of mechanical methods are used in this paper. They installed at the rear in the rocket nozzle could be freely moved along axial and radial direction on the mounting ring to provide the mass flow rate which is injected from the rocket nozzle. In this paper, the conceptual design and the performance study on the tapered ramp tabs of the thurst vector control has been carried out using the supersonic cold flow system and shadow graph. Numerical simulation was also performed to study flow characteristics and interactions between ramp tabs. This paper provides to analyze the location of normal shock wave and distribution of surface pressure on the region enclosed by the tapered ramp tabs.

• Wind and Structures
• /
• v.14 no.5
• /
• pp.383-411
• /
• 2011

Roof is an integral part of building envelope. It protects occupants from environmental forces such as wind, rain, snow and others. Among those environmental forces, wind is a major factor that can cause structural roof damages. Roof due to wind actions can exhibit either flexible or rigid system responses. At present, a dynamic test procedure available is CSA A123.21-04 for the wind uplift resistance evaluation of flexible membrane-roofing systems and there is no dynamic test procedure available in North America for wind uplift resistance evaluation of rigid membrane-roofing system. In order to incorporate rigid membrane-roofing systems into the CSA A123.21-04 testing procedure, this paper presents the development of a load cycle. For this process, the present study compared the wind performance of rigid systems with the flexible systems. Analysis of the pressure time histories data using probability distribution function and power spectral density verified that these two roofs types exhibit different system responses under wind forces. Rain flow counting method was applied on the wind tunnel time histories data. Calculated wind load cycles were compared with the existing load cycle of CSA A123.21-04. With the input from the roof manufacturers and roofing associations, the developed load cycles had been generalized and extended to evaluate the ultimate wind uplift resistance capacity of rigid roofs. This new knowledge is integrated into the new edition of CSA A123.21-10 so that the standard can be used to evaluate wind uplift resistance capacity of membrane roofing systems.

• Journal of Powder Materials
• /
• v.21 no.4
• /
• pp.301-306
• /
• 2014

Titanium alloys are extensively used in high-temperature applications due to their excellent high strength and corrosion resistance properties. However, titanium alloys are problematic because they tend to be extremely difficult-to-cut material. In this paper, the powder synthesis, spark plasma sintering (SPS), bulk material characteristics and machinability test of hybrid $Ti_2AlC$ ceramic bulk materials were systematically examined. The bulk samples mainly consisted of $Ti_2AlC$ materials with density close to theoretical value were synthesized by a SPS method. Random orientation and good crystallization of the $Ti_2AlC$ was observed at $1100^{\circ}C$ for 10 min under SPS sintering conditions. Scanning electron microscopy results indicated a homogeneous distribution and nano-laminated structure of $Ti_2AlC$ MAX phase. The hardness and electrical conductivity of $Ti_2AlC$ were higher than that of Ti 6242 alloy at sintering temperature of $1000^{\circ}C{\sim}1100^{\circ}C$. Consequently, the machinability of the hybrid $Ti_2AlC$ bulk materials is better than that of the Ti 6242 alloy for micro-EDM process of micro-hole shape workpiece.