• Current Research on Agriculture and Life Sciences
• /
• v.1
• /
• pp.67-83
• /
• 1983

The new microsporidia S80 isolated from, Bombyx mori L. in Korea showed ovoid in the morphology of the spores and the size were measured $2.9{\pm}0.28{\mu}$ in length and $1.7{\pm}0.29{\mu}$ width. No other microsporidian spore like this has not been so far isolated from Silkworm. The length of the polar filament extruded in hydrogen peroxide ($H_2O_2$) at $30^{\circ}C$ was $26{\mu}$ of a round cytoplasm on the top. The spores were partly stained with Giemsa, Safranin-O and Gram as the same staining properties as Nosema bombycis, Microsporidia K 79 and other microsporidian spores. The fine structures were observed under scanning eleceron microscope through ultrathin sectioning. The spore wall was composed of three layers ; the thin exospore of an electron dense rippled layer, the thick electron lucent endospore which was thinning considerably at the polar filament insertion point, and the inner limiting membrane. Polar cap present at the sporeapex, with a long polar filament of 12-13 coils, subtending angle of $60^{\circ}$ to spore axis, which is tubular made up of a multilayered and are a benes core, light ring structure enclosing the dance core, the dark ring structure enclosing the inner light ring structure and the other than and light ring structure bounded from cytoplasm. Lamellate polaroplast occupied the anterior part of the spore, and the two neclei with dense nucleoplasm bounded by a double nuclear envelope were cited in the slight downer middle portion of spore. From the characteristics of the shape, size and fine structures, it is certain to reason the Microsporidia S80 belong to the phylum Microspora, class Microspora, order Microsporida, order Microsporida. The shape of two nuclei cited seems to be genus Nosema, but in the classification for the suborder it should be defined wheather pansporoblasts be formed or not and for the genis especial attempts have been made to define the characters which distinguish the disporous genera in the life cycle. Survey through the infection of the bad cocoons during 1980 to 1982 in South Korea the areas contaminated with new microsporidia were revealed 5 provinces of Kyung-Gi, Kang-Won, Chung-Nam and Chun-Nam. Pathological effects inoculated per os at second instar larvae of silkworm, the LD 50 was $7.1{\times}10^7/ml$ as lower pathogenecity than that of Nosema bombycis Naegeli of $1.2{\times}10_7/ml$. While on the other hand the inoculation of the microsporidia at fourth instar larvae lowerd the whole cocoon weight and cocoon shell weight and significant at 1% level. The microsporidia S80 defined it can not be transmitted transovarially from the result of predictive and collective examination of 21 egg batches from the infected female moth.

• Korean Journal of Environment and Ecology
• /
• v.23 no.6
• /
• pp.528-534
• /
• 2009

Styan's Grasshopper Warblers (Locustella pleskei) are vulnerable species distributed in East-Asia only. Its known breeding sites in Korea are remote islets including Hongdo Islet, Chilbal Islet, Mara Islet, and Chuja Islets, and, therefore, the breeding biology of this species is still poorly known. This study was conducted on Mara Islet (N $33^{\circ}$ 06', E $126^{\circ}$ 16') from May to September 2008 to investigate the breeding status and breeding site characteristics of the grasshopper warblers. A total of 11 breeding pairs and their nests were found on trees and shrubs at artificially planted forests and hedges of Pinus thunbergii. The grasshopper warblers preferentially utilized the shrub trees for nesting places, and major nesting trees were Camellia japonica, Pittosporum tobira and Pinus thunbergii as nesting trees. Average heights of nesting trees and nests were $2.77{\pm}1.10m$ and $1.75{\pm}0.56m$, respectively. The grasshopper warblers selected lower shrubs and trees for nesting than randomly selected ones around them, probably to avoid strong and prevailed winds in flat and un vegetated environments on Mara Islet. The shape of nests was a round bowl-type, and measurements of nests were $11.9{\pm}0.5cm$ in exterior nest diameter, $11.1{\pm}1.1cm$ in height of exterior nest, $5.8{\pm}0.4cm$ in interior nest depth, and 6.0cm in interior nest diameter. It incubated eggs until the early August on Mara islet, and incubation periods of Mara Islet was possibly later than that of other areas. Furthermore, the clutch size in the study area was three, and they laid smaller number of eggs than normal clutch size (4~5 eggs) reported in other areas. Although we could not observe any nest predator on this species in the study area, selective cutting and pruning of trees will diminish dense shrub layer of forests. Therefore, it may affect the breeding of this threatened species which prefers dense shrubs of artificially planted forest of Pinus thunbergii. This study suggests that detailed and consistent further research on breeding biology and habitats of the grasshopper warblers are needed to conserve and manage of Pinus thunbergii forests on Mara Islet as an important breeding site of Styan's Grasshopper Warblers.

• Applied Microscopy
• /
• v.24 no.4
• /
• pp.61-77
• /
• 1994

The calcium-binding proteins (CaBP), parvalbumin (PV) and calbindin-D 28K (calbindin) are particularly abundant and specific in their distribution, and present in different subsets of neurons in many brain regions. Although their physiological roles in the neurons have not been elucidated, they are valuable markers of neuronal subpopulations for anatomical and developmental studies. This study is designed to characterize dorsal lateral geniculate nucleus (dLGN) neurons and axon terminals in terms of differential expression of immunoreactivity (IR) for two well-known CaBPs, PV and calbindin. The experiments were carried out on 6 adult monkeys. Monkeys were perfused under deep Nembutal anesthesia with 2% paraformaldehyde and 0.2% glutaraldehyde in 0.1M phosphate buffer. After removal, the brains were postfixed for 6-8 hr in 2% paraformaldehyde at $4^{\circ}C$ and infiltrated with 30% sucrose at $4^{\circ}C$. Thereafter, they were frozen in dry ice. Serial sections of the thalamus, at $20{\mu}m$, were made in the frontal plane with a sliding microtome. The sections were stained for PV and calbindin with indirect immunocytochemical methods. For electron microscopy, after infiltration with 30% sucrose the blocks of thalamus were serially sectioned at $50{\mu}m$ with a Vibratome in the coronal plane and stained immediately by indirect ABC methods without Triton X-100 in incubation medium. Stained sections were postfixed in 0.2% osmium tetroxide, dehydrated and flat-embedded in Spurr resin. The block was then trimmed to contain only a selected lamina or interlaminar space. The dLGN proper showed strong PV IR in fibers in all laminae and interlaminar zones. Particularly dense staining was noted in layers 1 and 2 that contain many stained fibers from optic tract. Neuronal cell body stained with PV was concentrated only in the laminae. In these laminae staining was moderate in cell bodies of all large and medium-sized neurons, and was strong in cell bodies of some small neurons together with their processes. Calbindin IR was marked in the neuronal cell body and neuropil in the S layers and interlaminar zones whereas moderate in the neuropil throughout the nucleus. Regional difference in distribution of PV and calbindin IR cell is distinct; the former is only in the laminae and the latter in both the S layer and interlaminar space. The CaBP-IR elements were confined to about $10{\mu}m$ in depth of Vibratome section. The IR product for CaBP was mainly associated with synaptic vesicle, pre- and post-synaptic membrane, and outer mitochondrial membrane and along microtubule. PV-IR was noted in various neuronal elements such as neuronal soma, dendrite, RLP, F, PSD and some myelinated or unmyelinated axons, and was not seen in the RSD and glial cells. Only a few neuronal components in dLGN was IR for calbindin and its reaction product was less dense than that of PV, and scattered throughout cytoplasm of soma of some relay neurons, and was also persent in some dendrite, myelinated axons and RLP. The RSD, F, PSD and glial elements were always non-IR for calbindin. Calbindin labelled RLP were presynaptic to unlabeled dendrite or dendritic spine and PSD. Calbindin-labeled dendrite of various sizes were always postsynaptic to unlabeled RSD, RLP or F. From this study it is suggested that dLGN cells of different functional systems and their differential projection to the visual cortex can be distinguished by differential expression of PV and calbindin.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.660-667
• /
• 2010

In this research polyimide, Matrimid 5218, hollow fiber membrane was used to recover sulfur hexafluoride($SF_6$) which is one of the six greenhouse gases from $N_2/SF_6$ mixture gas. Fibers were spun from using dry-wet phase inversion method. The module was manufactured by fabricating fibers after surface coating with silicone elastomer. The scanning electron microscopy(SEM) studies showed that the produced fibers typically had an asymmetric structure; a dense top layer supported by a sponge-like substructure. The developed module had a permeance of 0.78-1.36 GPU for $N_2$ with $N_2/SF_6$ selectivity of 2.44-5.08 at various pressure and temperature. For recovery of $SF_6$, a membrane module and 10 vol.% $SF_6$ from $N_2/SF_6$ mixture gas was used. The effects of various operating condition such as pressure, temperature, and retentate side flow rate were tested. When pressure and temperature were increased and retentate flow rate was decreased, the $SF_6$ purity in recovered gas was increased up to 37.5 vol.% with decreasing recovery ratio. When retentate flow rate was increased pressure and temperature was decreased, the $SF_6$ recovery ratio in retentate side was increased up to 89% with decreasing the $SF_6$ purity in retentate side.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.2
• /
• pp.82-86
• /
• 2011

Lightweight aggregate which is composed of sintered polycrystalline materials usually has a certain portion of pores inside of it. Because of such a structural characteristics, it tends to that movement of water in aggregate shows an abnormal behavior against the change of outside environment. In general, water movement behavior is controlled by porosity, distribution of pore size; however, dense surface layer will also affect water movement behavior in case of artificially sintered aggregates. Factors affecting water movement behavior in the aggregate are pore distribution, pore shape, pre-wetting method, etc. In this study, absorption characteristics of aggregate under the pressure and absorption rate according to water dipping time are analyzed for the basis of pressure pumping of lightweight concrete. Two kinds of aggregates were used for the test: one is made by 'L' company in Germany and the other is of our own made at the pilot plant in Kyonggi University. Absorption rate of aggregate is measured according to water dipping time, vacuum pressure, and quenching condition. Absorption rate of aggregate with $300^{\circ}C$ quenching is higher than that of aggregate with 24 hr water dipping. Generally the more vacuum the higher water absorption rate. Water absorption rate of 'L' aggregate under -300 mmHg is 54 % higher than that of aggregate with 24 hr water dipping; however, only 2 % increase in water absorption was measured for the K622 and K73 which were of our own.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.4
• /
• pp.162-167
• /
• 2005

Using Pechini method, we synthesized the $La_{0.6}Ca_{0.41}CrO_3$ (LCC41) and $La_{0.8}Sr_{0.05}Ca_{0.15}CrO_3$ (LSCC) powders for slurry dip coating, and $La_{0.75}Ca_{0.27}CrO_3$ (LCC27) powder for air plasma spray coating. The sintering property of the powders and their coating properties were investigated. The average particle sizes of the LCC41, LSCC, LCC27 were 0.6, 0.9, $1.5{\mu}m$, respectively. The relative density of LCC41 bulk was to be found about 98%. The LSCC coating on anode support prevented Ca migration of the coated LCC41 on the anode some or less, which was confirmed from EDS result. The air plasma spray-coated LCC27 with the dip-coated LCC41 were more dense and showed better electrical conductivity than those of the air plasma spray-coated LCC27 and the dip-coated LSCC and LSCC41. The LCC41 and LCC27 showed good electrical conductivities, but the LSCC had a poor electrical conductivity probably due to low sinterability

• Journal of Korea Water Resources Association
• /
• v.43 no.12
• /
• pp.1029-1038
• /
• 2010

In meteorology Korea has 2/3 of rain of annual total rainfall at the month of Jun through Sept and it has possibility to have serious flood damage because geographically it is composed of mountainous area with steep slope which account for 70% of its country. Also, the increase of impervious layer due to industrialization and urbanization causes direct runoff, which deteriorates contamination of rivers by moving the contaminated material on the surface at the beginning of rain. In particular, the area of leisure facilities needs the management of water quality absolutely because dense population requires space of park function and place to relax and increases moving capability of non-point pollution source. For disposition of rainfall & runoff, the standard of initial rainfall, which is to be used for the computation of disposition volume, is significant factors for the runoff study of non-point pollution source, Until now, a great deal of study has been done by many researchers. However, it is the current reality that the characteristics of runoff varies according to land protection comprising river basin and the standard of initial rainfall by each researcher is not clearly defined yet. Therefore, in this research, it is suggested that, with the introduction of SOM (Self-Organizing Map), the standard of initial rainfall be determined after analyzing each sectional data by executing pattern classification about runoff and water quality data measured at the test river basin for this research.

• Ocean and Polar Research
• /
• v.27 no.3
• /
• pp.299-309
• /
• 2005

The community structure of meiobenthos was studied in the sediment of Kongfjorden, Spitsbergen of Svalbard Island in the Arctic Sea. Samples of meiobenthos were collected in August, 2003. Meiobenthic organisms were collected by SCUBA and van veen grab or acryl sub-corers 34mm in internal diameter, and were taken from upper sediment to a depth of 3cm at each station. A total of 26 meiofaunal groups were found in the sediment of Spitsbergen in Svalbard Island. Nematodes were the most dominant faunal group. Sarcomastigophorans, benthic harpacticoids, and nauplius larvae of crustaceans, were also important components of the meiobenthic community of Kongsfjorden. All of these low faunal groups were comprised of more than 90% of total meiobenthos at every station. The total density of meiobenthos at each station was highest at station MeG 6 $(3,583{\pm}1,137inds./10cm^2)$, and lowest at station $MeG9(28{\pm}1inds./10cm^2)$. Meiobenthos in general showed the highest density in the upper 1cm layer. This may be associated with food and oxygen supply to subsurface. Harpacticoids showed extreme preference at the surface and little presence in layers deeper than 2cm. These animals may be less resistant to oxygen deficiency, and nauplius also showed the same trend. However, in St. MeG 8 and 9, meiobenthos were dense at depths of more than 0-1cm, at especially at depths of 2-3m because of relatively easy penetration of oxygen. Based on the results of cluster analysis, three meiobenthos assemblages were distinguished: one was in the outer and two were in the inner fjord. Station SCU 5 was grouped with the meiobenthos assemblage located in the outer fjord. The outer ford community was characterised by : 1) a relatively low mean number of meiobenthos taxa, 2) a relatively high density of harpacticods and nauplius. One of the inner ford communities (a group of four nation: MeG 2, 3, 8, 9) was in the proximity of the glaciers. Specifically, it was characterised by : 1) a low mean number of meiobenthos taxa, 2) a low density. The other inner ford community was characterised by both a high density and great mean number of meiofaunal taxa.

• Korean Journal of Oriental Medicine
• /
• v.12 no.3 s.18
• /
• pp.101-115
• /
• 2006

The purpose of this study was to introduce the differential standard of the types of Angelicae Pubescentis Radix. We established the classificatory standard according to the external and internal morphology and the physicochemistrical pattern for the four types of Aucklandiae Radix. The results follow: 1. At the external shape, Angelica pubescens f. biserrata has rising lenticel and dark brown surface, Its section is light gray and its xylem is yellow gray. Aralia continentalis has big stem mark in upper portion, its section has no dense tissue with yellow gray. Heracleum hemsleyanum has dark brown surface and little lenticel, its cortical layer is white yellow and xylem is isabella and powdered. 2. At the internal shape, Angelica pubescens f. biserrata has phloem with half of the root and rare vessel. Aralia continentalis has phloem with two-thirds of the root and it has broad cutting and putting vessel that formed 1-2 row. Heracleum hemsleyanum also has phloem with half of the root and wide scattered latex tube and many large vessel. 3. At the TLC pattern, Heracleum hemsleyanum has remarkable dark spot at $R_{f}$ 0.23 on the sulphuric acid color pattern test, but others have faint. 4. At the HPLC pattern, all samples have generally patterns. But Angelica pubescens f. biserrata shows diminutive continentalic acid content and the peak at Rt 20.278min comes out on Heracleum hemsleyanum, but do not come out on Aralia continentalis and Angelica pubescens f. biserrata. Heracleum hemsleyanum has remarkable peak at Rt 20.278min, but shows no peak at Rt 29.023min unlike Aralia continentalis or Angelica pubescens f. biserrata. Also Aralia continentalis and Angelica pubescens f. biserrata show one remarkable peak at Rt 29.023, but Heracleum hemsleyanum do not show. Consequently, Aralia continentalis and Angelica pubescens f. biserrata are comparable whit continentalic acid content and Heracleum hemsleyanum is comparable with the peak at Rt 20.273 and Rt 29.023. So it is thought that content of continentalic acid and the peaks at Rt 20.278 and Rt 29.023 can apply to differentiate a species from other. It is considered the results of this study will be furnished the basis to succeeding studies and it is needed to extensive comparative study for the same genus-degree of relatedness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.346-351
• /
• 2018

Metal three-dimensional (3D) printing technologies are mainly classified as powder bed fusion (PBF) and direct energy deposition (DED) methods according to the method of application of a laser beam to metallic powder. The DED method can be used to fabricate fine and hard 3D metallic structures by applying a strong laser beam to a thin layer of metallic powder. The PBF method involves slicing 3D graphics to be a certain height, laminating metal powders, and making a 3D structure using a laser. While the DED method has advantages such as laser cladding and metallic welding, it causes problems with low density when 3D shapes are created. The PBF method was introduced to address the structural density issues in the DED method and makes it easier to produce relatively dense 3D structures. In this paper, thin lines were produced by using PBF 3D printers with stainless-steel powder of roughly $30{\mu}m$ in diameter with a galvano scanner and fiber-transferred Nd:YAG laser beam. Experiments were carried out to find the optimal conditions for the width of a line depending on the processing times, laser power, spot size, and scan speed. The optimal conditions were two scanning processes in one line structure with a laser power of 30 W, spot size of $28.7{\mu}m$, and scan speed of 200 mm/s. With these conditions, a minimum width of about $85.3{\mu}m$ was obtained.