• The KIPS Transactions:PartC
• /
• v.11C no.1
• /
• pp.141-148
• /
• 2004

Recently, the demand of broadband communications such as high-speed internet, HDTV, 3D-HDTV and ATM backbone network has been increased drastically. For transmitting the broad-bandwidth data using wireless network, it is needed to use ka-band frequency. However, the use of this ka-band frequency is seriously affected to the received data performance by rain fading and atmospheric propagation loss at the Ka-band satellite communication link. So, we need adaptive MODEM to endure the degraded performance by channel environment. In this paper, we will present the structure and design of the 155Mbps adaptive Modem adaptively compensated against channel environment. In order to compensate the rain attenuation over the ka-band wireless channel link, the adaptive coding schemes with variable coding rates and the multiple modulation schemes such as trellis coded 8-PSK, QPSK, and BPSK are adopted. And the blind demodulation scheme is proposed to demodulate without Information of modulation mode at the multi-mode demodulator, and the fast phase ambiguity resolving scheme is proposed. The design and simulation results of adaptive Modem by SPW model are provided. This 155Mbps adaptive MODEM was designed and implemented by single ASIC chip with the $0.25\mu{m}$ CMOS standard cell technology and 950 thousand gates.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.2
• /
• pp.137-145
• /
• 2020

The recent bridge construction projects demand thorough and systematic safety and risk management, due to the increase of risk factors following the introduction of new and complex construction methods and technologies. Among many types of damages that can occur in bridge construction projects, the damages to third parties who are not directly related to the existing property of the contractor construction project can also bring about critical loss in the project in order to compensate the damages. Therefore, risks that could be caused by the loss occurred to indemnify the third party damages should be clearly analyzed, although there are not subsequent amount of studies focusing on the issue. Based on the past record of insurance payment from domestic insurance companies for bridge construction projects, this study aimed to analyze the risk factors of bridge construction for loss caused to compensate the third-party damages happened in actual bridge construction projects and to develop a quantified and numerical predictive loss model. In order to develop the model, the loss ratio was selected as the dependent variable; and among many analyzed independent variables, the superstructure, foundation, flood, and ranking of contractors were the four significant risk factor variables that affect the loss ratio. The results produced can be used as an essential guidance for balanced risk assessment, supplementing the existing analysis on material losses in bridge construction projects by taking into account the third-party damage and losses.

• The KIPS Transactions:PartD
• /
• v.10D no.1
• /
• pp.85-100
• /
• 2003

Today's computing system has expanded its application to business trade and distributed work transactions using the Internet. As the demand for more flexible, adaptable, extensible, and robust web-based enterprise, these application development has been gradually expanded based on reusable, independent, and portable components. Component Based Development (CBD) works by developing and evolving software from selected reusable software components and then assembling them within appropriate software architecture. However, it requires an increase in cost to build new components as well as the necessary effort to develop of the business requirement these components. Standardized component models are required as well from the perspective of systems in order to support rapid and exact component information transmission on the web. In this paper, we describe the e-Business Component Development with agent for rapid application development on the web that correspond to the demands of users in the business domain. We design and implement the specifications of e-business components by combining these demands. In order to improve the agent register and retrieval, we propose the intelligent search and register agents, which can conduct more precise searching and specializing for components. The system enables the locating of user's frequently used components through an agent involving register and retrieval, as well as rapid procedures for registers The e-BCOS (e-Business Component System) is the agent system for the user to register distributed components and to search for components Information. The e-BCOS increases reusability through the e-business component development of distributed components in the business domain. For the share and delivery, specification with XML is acceptable to user's variable order e-BCOS Includes the effective investment, timeliness, reliability, efficiency, and maintenance effort by with agent.

• Composites Research
• /
• v.30 no.6
• /
• pp.356-364
• /
• 2017

Composite lattice structures are tried to be used in various fields because of its benefit in physical properties. With increase of demand of the composite lattice structure, nondestructive testing technology is also required to certificate the quality of the manufactured structures. Recently, research on the development of the composite lattice structure in Republic of Korea was started and accordingly, fast and accurate non-destructive evaluation technology was needed to finalize the manufacturing process. This paper studied non-destructive testing methods for composite lattice structure using laser ultrasonic propagation imaging systems. Pulse-echo ultrasonic propagation imaging system was able to inspect a rib structure wrapped with a skin structure. To reduce the time of inspection, a band divider, which can get signal in different frequency bands at once, was developed. Its performance was proved in an aluminum sandwich panel. In addition, to increase a quality of results, curvature compensating algorithm was developed. On the other hand, guided wave ultrasonic propagation imaging system was applied to inspect delamination in a rib structure. To increase an area of inspection, multi-source ultrasonic wave propagation image was applied, and defects were successfully highlighted with variable time window amplitude mapping algorithm. These imply that ultrasonic propagation imaging systems provides fast and accurate non-destructive testing results for composite lattice structure in a stage of the manufacturing process.

• Journal of Distribution Science
• /
• v.14 no.3
• /
• pp.63-71
• /
• 2016

Purpose - A variety of indicators are used for the diagnosis of economic situation. However, most indicators explain the past economic situation because of the time difference between the measurement and announcement. This study aims to argue for the resurrection of an idea: electricity demand can be used as an indicator of economic activity. In addition, this study made an endeavor to develop a new Real Business Index(RBI) which could quickly represent the real economic condition based on the sales statistics of industrial and public electricity. Research design, data, and methodology - In this study monthly sales of industrial and public electricity from 2000 to 2015 was investigated to analyze the relationship between the economic condition and the amount of electricity consumption and to develop a new Real Business Index. To formulate the Index, this study followed next three steps. First, we decided the explanatory variables, period, and collected data. Second, after calculating the monthly changes for each variable, standardization and estimating the weighted value were conducted. Third, the computation of RBI finalized the development of empirical model. The principal component analysis was used to evaluate the weighted contribution ratio among 3 sectors and 17 data. Hodrick-Prescott filter analysis was used to verify the robustness of out model. Results - The empirical results are as follows. First, compatibility of the predictability between the new RBI and the existing monthly cycle of coincident composite index was extremely high. Second, two indexes had a high correlation of 0.7156. In addition, Hodrick-Prescott filter analysis demonstrated that two indexed also had accompany relationship. Third, when the changes of two indexes were compared, they were found that the times when the highest and the lowest point happened were similar, which suggested that it is possible to use the new RBI index as a complementing indicator in a sense that the RBI can explain the economic condition almost in real time. Conclusion - A new economic index which can explain the economic condition needs to be developed well and rapidly in a sense that it is useful to determine accurately the current economic condition to establish economic policy and corporate strategy. The salse of electricity has a close relationship with economic conditions because electricity is utilized as a main resource of industrial production. Furthermore, the result of the sales of electricity can be gathered almost in real time. This study applied the econometrics model to the statistics of the sales of industrial and public electricity. In conclusion, the new RBI index was highly related with the existing monthly economic indexes. In addition, the comparison between the RBI index and other indexes demonstrated that the direction of the economic change and the times when the highest and lowest points had happened were almost the same. Therefore, this RBI index can become the supplementary indicator of the official indicators published by Korean Bank or the statistics Korea.

• Journal of Distribution Science
• /
• v.14 no.6
• /
• pp.75-80
• /
• 2016

Purpose - A growing demand for sustainability reporting has placed pressure on firms with non-financial information that affects firm valuation, growth, and development. In particular, a number of researchers have investigated various topics in Corporate Social Responsibility (CSR), non-financial information. Prior studies suggest that CSR may affect corporate outcomes like corporate reporting, financial performance, and disclosures. However, the results from prior studies are not clear whether CSR affects corporate outcomes. This is partially due to the measurement issues with CSR. In this study, we examine whether CSR affects the quality of corporate reporting, one of the popular measures in corporate outcomes. We find an evidence that CSR positively affects the quality of corporate reporting. Research design, data, and methodology - In this study, we collected a unique dataset of CSR from MSCI. Total 169 firms listed in the Korean Stock Exchange from 2011 to 2014 were collected and analysed with the detailed CSR reports. Using a correlation test, we found a weak association between CSR and the quality of corporate reporting. However, the regression tests provided a strong relationship between CSR and the quality of corporate reporting after controlling for other variables that may affect the quality of corporate reporting. Additionally, we calculated the t-statistics based on heteroskedaticity-consistent standard errors (White, 1980). Results - Before we run the regression test, we sort the measures of the two dependent variables into each rating of CSR (from AAA to CCC). The results indicate that the quality of corporate reporting measured by discretionary accruals and performance-matched discretionary accruals monotonically decrease as the CSR ratings increase. This supports our hypothesis. In the regression tests, the coefficient on MJDA (PMDA) is -0.183 (-0.173) and significant at the 5% level. We can interpret the results as CSR affecting the quality of corporate reporting in positive ways. Other coefficients on control variables are consistent with prior studies. For example, the coefficients on both LOSS and LEV are positive and significant at conventional level, meaning that firms with financial difficulty may harm their quality of corporate reporting. Conclusion - We found an evidence that CSR is positively associated with the quality of corporate reporting. This study contributes to the literature in various ways. First, this study extends the line of CSR research by providing additional evidence in the setting of ethical behaviors by managements. This is consistent with the hypothesis and supports the results of prior studies. Second, to the best of my knowledge, this is the first study using the MSCI CSR ratings. In contrast with prior studies using different measures of CSR, the MSCI CSR ratings allow us to provide in-depth analysis. Third, the additional measure of dependent variable (PMDA) allows us to improve the robustness of our results. Overall, the results provided this study to extend the findings in prior studies by providing incremental evidence.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.79-86
• /
• 2015

Purpose - The cosmetics industry is a traditional high value-added industry in terms of the domestic demand, small batch production systems, exclusive competition, and raw materials highly dependent on overseas countries as well as an oligopolistic market structure. However, new foreign brands and growing consumer awareness of inexpensive products, has triggered a shift. In line with changing lifestyles and the polarization of consumption, the industry faces a new market structure. Among its key characteristics is the cosmetics industry's numerous distribution channels (i.e., department stores, door-to-door sales, online shopping malls, brand shops, and discount stores). Therefore, the study of its distribution channels is essential. Research design, data, and methodology - The study analyzed channel distribution power divided into coercive and non-coercive power. The factors of coercive power included: unilateral request of an increase in commissions, interference in sales by taking advantage of a superior status, unilateral buck-passing at the time of a problem, unilateral request to stop sales activities, and a unilateral business contract; the factors of non-coercive power included favorable payment conditions, offers of various kinds of information, policy on commission reduction, pride in market entrance, and promotion support. In addition, the mediating variable "interdependence" was applied to the execution of department store (or mart) power and their shop conflicts and satisfaction to examine direct and indirect influential power. The methodology was a survey of managers of cosmetics shops in department stores (or marts). The questionnaire, based on a five-point Likert scale, included questions about basic personal information, execution of power, interdependence, conflict, and satisfaction. The study distributed 198 questionnaires and collected 131. Ten questionnaires with missing or hard to analyze data were excluded. Thus, 121 copies were analyzed. Results - According to the analysis, the execution of coercive power by department stores (or marts) did not affect interdependence, but the execution of non-coercive power did. Interdependence did not influence conflict, but did affect satisfaction. Additionally, the analysis revealed direct influential power: the execution of coercive power positively affected conflict and negatively influenced satisfaction; the execution of non-coercive power positively affected satisfaction. Conclusions - To offer suggestions for distribution business relations in the cosmetics industry, this study investigated how the execution of power by department stores (or marts) affected their shops. More specifically, it examined how much the execution of both coercive power and non-coercive power influenced conflict and satisfaction, and analyzed the mediating role of interdependence. In line with previous study results in various areas, coercive power was shown to be the source of conflict, leading to a decrease in satisfaction, whereas non-coercive power significantly positively influenced satisfaction. Moreover, non-coercive power increased interdependence, which led to greater satisfaction. As a result, interdependence had a mediating effect on non-coercive power and satisfaction. Based on the results, department stores (or marts) should look for improvements plans that increase interdependence. Such plans could alleviate conflict with the shops, increasing their satisfaction.

• Korean System Dynamics Review
• /
• v.2 no.2
• /
• pp.25-40
• /
• 2001

This paper describes the forecast of power plant construction in a competitive korean electricity market. In Korea, KEPCO (Korea Electric Power Corporation, fully controlled by government) was responsible for from the production of the electricity to the sale of electricity to customer. However, the generation part is separated from KEPCO and six generation companies were established for whole sale competition from April 1st, 2001. The generation companies consist of five fossil power companies and one nuclear power company in Korea at present time. Fossil power companies are scheduled to be sold to private companies including foreign investors. Nuclear power company is owned and controlled by government. The competition in generation market will start from 2003. ISO (Independence System Operator will purchase the electricity from the power exchange market. The market price is determined by the SMP(System Marginal Price) which is decided by the balance between demand and supply of electricity in power exchange market. Under this uncertain circumstance, the energy policy planners such as government are interested to the construction of the power plant in the future. These interests are accelerated due to the recent shortage of electricity supply in California. In the competitive market, investors are no longer interested in the investment for the capital intensive, long lead time generating technologies such as nuclear and coal plants. Large unclear and coal plants were no longer the top choices. Instead, investors in the competitive market are interested in smaller, more efficient, cheaper, cleaner technologies such as CCGT(Combined Cycle Gas Turbine). Electricity is treated as commodity in the competitive market. The investors behavior in the commodity market shows that the new investment decision is made when the market price exceeds the sum of capital cost and variable cost of the new facility and the existing facility utilization depends on the marginal cost of the facility. This investors behavior can be applied to the new investments for the power plant. Under these postulations, there is the potential for power plant construction to appear in waves causing alternating periods of over and under supply of electricity like commodity production or real estate production. A computer model was developed to sturdy the possibility that construction will appear in waves of boom and bust in Korean electricity market. This model was constructed using System Dynamics method pioneered by Forrester(MIT, 1961) and explained in recent text by Sternman (Business Dynamics, MIT, 2000) and the recent work by Andrew Ford(Energy Policy, 1999). This model was designed based on the Energy Policy results(Ford, 1999) with parameters for loads and resources in Korea. This Korea Market Model was developed and tested in a small scale project to demonstrate the usefulness of the System Dynamics approach. Korea electricity market is isolated and not allowed to import electricity from outsides. In this model, the base load such as unclear and large coal power plant are assumed to be user specified investment and only CCGT is selected for new investment by investors in the market. This model may be used to learn if government investment in new unclear plants could compensate for the unstable actions of private developers. This model can be used to test the policy focused on the role of unclear investments over time. This model also can be used to test whether the future power plant construction can meet the government targets for the mix of generating resources and to test whether to maintain stable price in the spot market.

• Journal of Korean Society of Transportation
• /
• v.33 no.4
• /
• pp.393-404
• /
• 2015

Gravity model has had the major problem that the model explains the characteristics of travel behavior with only deterrence factors such as travel time or cost. In modern society, travel behavior can be affected not only deterrence factors but also zonal characteristics or transportation service. Therefore, those features have to be considered to estimate the future travel demand accurately. In this regard, there are two primary aims of this study: 1. to identify the characteristics of inter-zonal travel, 2. to develop the new type of calibration method. By employing accessibility variable which can explain the manifold pattern of trip, we define the zonal travel behavior newly. Furthermore, we suggest 2-phase calibration method, since existing calibration method cannot find the optimum solution when organizing the deterrence function with the new variables. The new method proceeds with 2 steps; step 1.estimating deterrence parameter, step 2. finding balancing factors. The validation results with RMSE, E-norm, C.R show that this study model explains the inter-zonal travel pattern adequately and estimate the O/D pairs precisely than existing gravity model. Especially, the problem with estimation of short distance trip is overcomed. In conclusion, it is possible to draw the conclusion that this study suggests the possibility of improvement for trip distribution model.

• Journal of the Korean Regional Science Association
• /
• v.33 no.1
• /
• pp.17-27
• /
• 2017

The purpose of this study is to analyze the determinants of start-ups by industry based on the theoretical background of entrepreneurship. For this purpose, regional industrial structure and local labor market structure are considered in order to focus on regional factors in addition to economic factors, income factors, and technological innovation factors. As an analyzed result, three theories of entrepreneurship generally agree with the determinants of industry - specific entrepreneurship. During the economic recession, the number of start-ups has increased. The intra-regional consumption and the local government expenditure per capita have also positive effects on the start-up. The incubation center has a positive effect on the start - up in the manufacturing sector. Therefore, the academic-industrial leading various incubation facilities should be activated in addition to the central or local government leading incubation centers, which is a part of the policy to support start-ups of central and local governments. In addition, population growth is a very important factor in terms of potential demand creation, and the characteristics of regional industrial structure and the effect of human capital within the region differ by industry. In the case of the manufacturing industry, the accumulation effect positively influences the start-up of the industry. In other service industries, the human capital variable had the greatest effect on the start-up when all other conditions are constant.