• 한국전자거래학회지
• /
• 제11권1호
• /
• pp.127-144
• /
• 2006

본 연구는 국내 섬유의류산업의 공급사슬관리 시스템인 QR(Quick Response) 시스템 구현에 웹서비스 기반의 ASP(WS-ASP) 모델을 제시한다. 국내 섬유의류산업은 대부분 중소기업으로 구성되어 있어서 전문 IT인력을 확보하기 어렵고 대규모 IT 투자여력도 없는 형편이다. ASP 모델은 소프트웨어 온 디맨드 서비스를 저렴한 사용 수수료로 제공받을 수 있다는 장점 이 있으나, ASP 벤더에 대한 의존도가 높아 벤더 위험이 크다는 단점이 있다. 본 연구는 WS-ASP모델을 통해 소프트웨어 온 디맨드 서비스를 여러 특화된 WS-ASP벤더에 분산시켜 벤더 위험을 감소시킴으로써 ASP모델의 단점을 보완하여 QR 시스템에 적절함을 제시하였다.

• 조명전기설비학회논문지
• /
• 제27권1호
• /
• pp.17-23
• /
• 2013

The BESS(Battery Energy Storage System) is an useful device for load leveling, but the high cost, installation space and safety issues are the main barriers for supplying it widely. The important factor in supplying BESS to customers successfully is the payback period. As most of the H/W cost factors are uncontrollable, the optimization of storage volume can be useful factor in improving payback period. In order to obtain optimized BESS volume, the load factor, demand ratio, peak shaving ratio, electric rates and benefits from DR participation of customer should be analyzed. In this paper, we could verify the peak cutting capability and cost effectiveness under the some proposed conditions and changing value of PCS and battery based on the customers data after volume optimization process was applied, and we can identified the saturation point of load factor and shortening of customer's payback period.

• 보건행정학회지
• /
• 제13권1호
• /
• pp.69-97
• /
• 2003

This study focuses on the determinants of the community health service utilization. Theories suggest seven models for community health service utilization, which are divided largely into two groups such as Health Service Supply Model and Health Service Demand Model: Supply Model includes Medical Implements Model, Personnel and Budget Model, Management System Model, Staffs' Behavior Model, Service Quality Model; Demand Model includes Area Model and Clients' Characteristics Model. This paper tests how the above models influence on the community health service utilization. After interviewing some administrative staffs of the Community Health Service Center at Pusan, questionnaires were made and mailed to the staffs of 198 Korean Community Health Service Center as a universe, among which from 98 centers we got response. Analyzing the data from the questionnaires, we found "the number of personnels in the health service center" and "demands for medical service" as important variables to affect the utilization of the community health service center. These two variables are typical factors representing Supply Model and Demand Model each. However, the variables selected from Management System Model, Administrative Behavior Model, Service Quality Model and Area model are not significant in a statistical sense. The paper suggests that to recruit the personnels, especially nurses, and to make out the demands of the clients for health service be the precedent conditions to increase the utilization of the Community Health Service Centers in Korea.ce Centers in Korea.

• 농업과학연구
• /
• 제49권3호
• /
• pp.679-690
• /
• 2022

As the supply and demand of pork has become a significant concern in Korea, controlling it has become a critical challenge for the industry. However, compared to the demand for pork, which has relatively stable consumption, it is not easy to maintain a stable supply. As the preparation of measures for a supply-demand crisis response and supply control in the pig industry has emerged as an important task, it has become necessary to establish a stable supply model and create an appropriate manual. In this study, a pork supply prediction model is constructed using reported data from the pig traceability system. Based on the derived results, a method for determining the supply-demand crisis stage using a statistical approach was proposed. From the results of the analysis, working days, African swine fever, heat wave, and Covid-19 were shown to affect the number of pigs graded in the market. A test of the performance of the model showed that both in-sample error rate and out-sample error rate were between 0.3 - 7.6%, indicating a high level of predictive power. Applying the forecast, the distribution of the confidence interval of the predicted value was established, and the supply crisis stage was identified, evaluating supply-demand conditions.

• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.126-133
• /
• 2014

This paper addresses order-lot pegging issues in the supply chain of a semiconductor business. In such a semiconductor business (memory or system LSI) order-lot pegging issues are critical to achieving the goal of ATP (Available to Promise) and on-time production and delivery. However existing pegging system and researches do not consider capacity limit on bottleneck steps. This paper presents an order-lot pegging algorithm for assigning a lot to an order considering quality constraints of each lot and capacity of bottleneck steps along the entire FAB. As a result, a quick and accurate response can be provided to customer order enquiries and pegged lot lists for each promised orders can be shown transparently and short or late orders can be detected before fixing the order.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.804-811
• /
• 2015

The presence of responsive loads in the promising active distribution networks (ADNs) would definitely affect the power system problems such as distributed generations (DGs) studies. Hence, an optimal procedure is proposed herein which takes into account the simultaneous placement of DGs and smart meters (SMs) in ADNs. SMs are taken into consideration for the sake of successful implementing of demand response programs (DRPs) such as direct load control (DLC) with end-side consumers. Seeking to power loss minimization, the optimization procedure is tackled with genetic algorithm (GA) and tested thoroughly on 69-bus distribution test system. Different scenarios including variations in the number of DG units, adaptive power factor (APF) mode for DGs to support reactive power, and individual or simultaneous placing of DGs and SMs have been established and interrogated in depth. The obtained results certify the considerable effect of DRPs and APF mode in determining the optimal size and site of DGs to be connected in ADN resulting to the lowest value of power losses as well.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2251-2261
• /
• 2016

The use of renewable energy sources and energy storage systems is increasing due to new policies in the energy industries. However, the increase in distributed generation hinders the reliability of power systems. In order to stabilize power systems, a virtual power plant has been proposed as a novel power grid management system. The virtual power plant plays includes different distributed energy resources and energy storage systems. We define a core virtual power plant technology related to demand response and ancillary service for the cases of Korea, America, and Europe. We also suggest applications of the proposed virtual power plant to the vehicle-to-grid market for restructuring national power industries in Korea.

• 한국시뮬레이션학회논문지
• /
• 제15권3호
• /
• pp.11-21
• /
• 2006

그리드 컴퓨팅의 발전이 증가함에 따라 그리드 자원 관리를 위한 중요성과 필요가 크게 늘어났다. 그러나 지리적으로 분산된 환경에서 자원을 효율적으로 분배하고 활용하는 것은 매우 복잡하다. 이것은 그리드 자원 소유주들이 서로 다른 접근 정책과 제약 조건들을 가지고 있기 때문이다. 사용자들은 그들의 요구에 따라 자원을 요청한다. 그리드 컴퓨팅 시스템의 운영자들은 이러한 요구를 반영하기 위해 시스템 상태를 모니터할 필요가 있다. 그래서 그리드 컴퓨팅 시스템은 자원의 상태를 모니터하는 자원 관리 정책을 필요로 하고 그 자원들을 할당한다. 이 논문은 사용자의 요구와 공급자의 공급 전략에 기반한 거래 할당에 의한 효율적인 자원 관리를 제공하는 사용자 요구 기반 그리드 거래 관리 모델을 제안한다. 성능을 평가하기 위해 이 논문은 자원 거래의 증가율, 거래의 평균 응답 시간, 그리고 처리 시간 활용도를 측정한다. 먼저 거래의 평균 증가율은 경매 모델과 이중 경매 모델보다 각각 585.7%, 322.6% 더 높다. 두 번째로 사용자 요구 기반 그리드 거래 관리 모델의 평균 응답 시간은 3에서 5의 시뮬레이션 시간을 유지한다. 마지막으로, 처리 시간 활용도는 경매 모델과 이중 경매 모델보다 각각 평균 145.4%, 118.0% 더 높다. 이러한 실험 결과는 사용자 요구 기반 그리드 거래관리 모델의 유용성을 입증한다.

• 한국의류산업학회지
• /
• 제17권1호
• /
• pp.102-115
• /
• 2015

Due to the diversification of lifestyles and the rapid growth of Internet environments since the 1990s, mass customization has been recently accepted as an important trend in the area of clothing and all other areas. In response to mass customized clothing products, global clothing product brands are introducing systems for mass customization such as the application of digital fashion systems that introduced IT technologies such as CAD and 3D scanners. However, studies of planning factors for clothing products applied with digital fashion systems in the area of mass production of clothing products are insufficient. Therefore, this study was intended to analyze the lifestyles of 20-30s that are expected to have the highest demand for clothing applied with digital fashion systems and present basic planning factors according to lifestyles. Through the analysis, three groups that have one of fashion pursuing type, sensory information pursuing type, and practical function pursuing type lifestyles were derived. Based on this result, consumer demand for digital fashion systems and basic factors for product planning were analyzed to present basic planning factors for digital fashion system based customized clothing by lifestyle group. This study is meaningful in that it provided basic data for product planning through digital fashion systems by analyzing the awareness, preference, necessity, and planning factors of digital fashion systems through the analysis of lifestyle types.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.331-336
• /
• 2008

An self-centering energy-dissipative (SCED) bracing system has recently been developed as a new seismic force resistant bracing system. The advantage of the SCED brace system is that, unlike other comparable advanced bracing systems that dissipate energy, such as the buckling restrained brace system, it has a self-centering capability that reduces or eliminates residual building deformations after major seismic events. In this study seismic performance of SCED braced frames is evaluated for a set of 20 design level earthquake records. According to analysis results the SCED systems showed more uniform interstory drift demand for buildings with 8 story or fewer. The residual deformation in SCED buildings turned out to be much less than that of moment-resisting frames.