• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.8-12
• /
• 2010

Purpose: In $^{18}F$-FDG automated synthesizer, deliver is done in automated mode after synthesis until the dispenser. After the delivery, the yield is calculated from the radioactivity which was read by the dose calibrator located in the dispenser. However, when the distance between the automated synthesizer and the dispenser is far, there are $^{18}F$-FDG residues, which results in loss of the amount of $^{18}F$-FDG. This study investigated the usefulness of a method that minimizes $^{18}F$-FDG residues. Materials and Methods: The structure of the tubing between the (TRACERlab Mx FDG; GE.) and the dispenser is that the distance is 8 m and the internal diameter is 1/16 inch. The synthesis process of The module goes through the synthesis process of trap, synthesis, delivery in the automated module. The time taken for synthesis is about 25 to 26 minutes, after which rinsing is done. However, after rinsing, as the distance of the tubing increased, there were 10~13% of $^{18}F$-FDG residues. Therefore, a method of using push syringe and $N_2$ gas in manual mode to minimize $^{18}F$-FDG residues is analyzed. Results: In manual mode, there were $^{18}F$-FDG residues of 4~5% for the push syringe, and there were $^{18}F$-FDG residues of less than 1% for the $N_2$ gas, which showed that the method using $N_2$ gas had superior usefulness. Also, there were no $^{18}F$-FDG residues in the cleaning the next day. Conclusion: The distance between the synthesizer and the dispenser needs to be reduced as much as possible, to reduce the rate of loss of $^{18}F$-FDG resulting from the distance of the tubing. However, in case the distance between the synthesizer and the dispenser has to be increased due to the system structure, using push syringe and $N_2$ gas simultaneously is a useful method for minimizing $^{18}F$-FDG residues.

• Restorative Dentistry and Endodontics
• /
• v.36 no.3
• /
• pp.180-187
• /
• 2011

Introduction: Eliminating the residual debris and bacteria in the root canal system is one of the main purposes of the endodontic treatment. However, the complexity on the anatomy of the root canal system makes it difficult to eliminate the bacterial biofilm existing along the root canal surface and necrotic pulp tissue by mechanical instrumentation and chemical irrigation. Recently, more effective irrigant delivery systems for root canal irrigation have been developed. The purpose of this review was to present an overview of root canal irrigant delivery techniques and devices available in endodontics. Review: The contents of this paper include as follows; - syringe-needle irrigation, manual dynamic irrigation, brushes - sonic and ultrasonic irrigation, passive ultrasonic irrigation, rotary brush, RinsEndo, EndoVac, Laser Conclusion: Though technological advances during the last decade have brought to fruition new agitation devices that rely on various mechanisms, there are few evidence based study to correlate the clinical efficacy of these devices with improved outcomes except syringe irrigation with needle and ultrasonic irrigation. The clinicians should try their best efforts to deliver antimicrobial and tissue solvent solutions in predictable volumes safely to working length.

• Restorative Dentistry and Endodontics
• /
• v.37 no.2
• /
• pp.119-122
• /
• 2012

Regenerative endodontics has a potential to heal a partially necrotic pulp, which can be beneficial for the continued root development and strengthening of immature teeth. For this purpose, triple antibiotic mixture of ciprofloxacin, metronidazole, and minocycline was recommended as intracanal medicament in an attempt to disinfect the root canal system for revascularization of a tooth with a necrotic pulp. However, discoloration of the tooth was reported after applying this. This case shows the idea for preventing the tooth discoloration using a delivery syringe to avoid the contact between the clinical crown and the antibiotics.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.376-380
• /
• 2007

This paper suggests remote injection system and explains the design of the system and means of implementation. Remote injection system means a system delivering the precise injection prescribed to the patient in the ward through input into the remote server using TCP/IP protocol. The system has been planned in detail. The syringe has been designed to be linked with the Ringer's rubber tube and the independently developed syringe-module is to be used in order to ensure precise and accurate delivery of the injected medication. In development stage of embedded software, object-oriented planning method has been chosen.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.13 no.4
• /
• pp.179-188
• /
• 2013

Background: Today, there are computer controlled local anesthesia devices used clinically. The main principle is to control injection speed by computer aided system, and it relieves pain. However, there are few objective data considering this subject. In this literature review, we researched studies about computer controlled anesthetic delivery. We compared pain control effect of computer controlled to conventional local anesthetic syringe system. Methods: A bibliographic search in PubMed was performed and we reviewed original articles. Results: There were 18 publications that compared pain control effect of computer controlled to conventional system. There were 8 articles reported of children, similar pain control effect was found in 7 of them. One study showed superior pain control effect of computer controlled anesthetic delivery. For adults, 10 studies showed superior pain control effect in computer aided system. Conclusions: Computer controlled anesthetic delivery has similar or superior pain control effect compared to conventional local anesthetic syringe system. For both children and adults, computer controlled anesthetic delivery could be clinically useful, still it may be more effective for adults.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.317-318
• /
• 1998

The purpose of this study is to design and develop the circuit of the dual mode syringe pump. Syringe pump is used in intensive care unit, delivery room, pediatric room, operating theater and other fields of hospital at present. Normally the syringe pump delivers one medicine in one case, but in case of intensive care unit, it is necessary to deliver more than two kinds of medicines at a time. Therefore we have designed dual mode syringe pump. We used RISC type microcontroller, PIC17C44 as master controller, and PIC16C73 as slave cpu using for the low power consumption. The performance of system is evaluated by analysis of the linearity and accuracy which is the most important factors in application. While the proposed system shows a acceptable linearity and accuracy, a further research about reducing the errorr should be done.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.65-76
• /
• 2010

Purpose: he use of PET scanners and the number of patient in Korea have been increased for recent several years dramatically. For this reason, technologists have more possibilities to be exposed to the radiation. The hospitals using PET scanners should make an effort to reduce the radiation exposure dose. The purpose of this study was to evaluate the radiation exposure does when using radiation shielding devices. The evaluation was performed through questionnaire survey and experiment. Materials and Methods: First, the technologists who had experience working in PET center in 2008-2009 were surveyed with questionnaire and TLD Figures, personal opinion of utilization of radiation shielding devices are analyzed. Second, we measured the shielding rate of shielding devices which have been using in PET study procedures. We divided the procedures into four steps; distribution, moving, injection of $^{18}F$-FDG and patient setup. Results: First, the results of this survey, using of L-block+Syringe shield, L-block, Syringe shield, No shield during the injection, were each 58.5%, 20%, 9%, 12.3%. The TLD values according to utilization of radiation shield, using both L-block+Syringe Shield and L-block showed the lower TLD values, and Syringe shield only or No shield showed the higher TLD values. Second, the results of experiments according to PET study procedures measured the shielding rates as follows. The shielding rates during the distribution using L-block, L-block+Apron shield were measured 97.4%, 97.7%. The shielding rates during the $^{18}F$-FDG delivery to the injection room using mobile Syringe shield, Syringe holder, Syringe shield carrier were each 81.7%, 98.9%, 99.7%. The shielding rates during the injection using Syringe shield, L-block, L-block+Syringe shield were measured each 51.9%, 98.3%, 98.7%. The shielding rates of Apron were measured in each 30, 60, 90, 120, 150 cm distance. The measurement were each 16.9%, 14.2%, 16.6%, 17.1%, 18.1%, 18.6%. Conclusion: The most effective method for radiation shielding is to using L-block during the $^{18}F$-FDG distribution and Syringe shield carrier during in moving $^{18}F$-FDG. For the $^{18}F$-FDG injection, L-block+Syringe shield have to be used. The shielding effect of Apron has shown average 16.4%. According to the survey of questionnaire, the operators recognized well risk of the radiation exposure but, tended ignore in working. The radiation dose according to recognition of radiation exposure risk was not relevant. but radiation dose according to utilization of radiation shield lower the more use it. The main reason of no use of shielding devices is cumbersome, 55% of the respondents answered. I'm sure, by use of radiation shield in all PET procedure, radiation exposure will be reduced considerably.

• Journal of Periodontal and Implant Science
• /
• v.34 no.3
• /
• pp.639-646
• /
• 2004

Dental phobia is the most prevalent fear in all age groups, across gender, and in all countries. One of the primary identified sources is the fear of dental injections in the dental phobia or the high dental fear and anxiety groups. The purpose of this study was to clinically evaluate the computer controlled anesthetic device and to compare it with traditional methods of dental anesthetic delivery. Fifty(mean age : 25.6 yrs) systemically and periodontally healthy volunteers participated in this study. The subjects were given contralateral buccal and palatal injections. One side was injected with the computer-controlled anesthetic device with a microprocessor and an electric motor to precisely regulate flow rate during administration : The experimental group. The control side was injected with a standard manual syringe, in which flow rate and pressure are operator-dependent and can't be controlled accurately : The control group. The subjects described their perceived pain experiences with two subjective scales. The results of this study were as follows: 1. The computer-controlled anesthetic device was significantly less painful than conventional syringe injection 2. The female subjects reported more pain than the male subjects. But, there were no statistical differences. 3. The anesthetic effect of both methods did not show any difference. In this study, it may be concluded that pain levels decreased significantly when the computer-controlled anesthetic device was used.

• The Korean Journal of Pain
• /
• v.5 no.1
• /
• pp.23-28
• /
• 1992

The use of epidural narcotics to treat cancer pain was first described by Behar et al in 1979. More recently, a variety of implantable INDSs have been described for long-term intraspinal narcotic administration. Especially, among these systems INDS typeIII which is designed by Poletti et al is relatively low cost and less risk of infection, therefore this system has been widely accepted but the clinical experience is insufficient yet. 1, Problems, 1) thorough education of patients and care-givers about this system the method of drug delivery and the situations could be happen in using this system. 2) high cost of continuous drug delivery system 3) legal problems about morphine carry-out in the case of bolus infusion by syringe 1. Complications; 1) by morphine; Significant respiratory depression was not found in all 21cases. other morphine-related complications were occurred occasionally but improved within a few days by appropriate treatment. 2) by system, Blockage or leakage of catheter was occurred in 2cases and wound infection was occurred in 2cases and so reimplantation was done.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.18 no.6
• /
• pp.367-373
• /
• 2018

Background: Fear of local anesthesia (LA) is a significant impediment to dental care as many patients delay or avoid treatment to avert pain. Computer-controlled local anesthetic delivery system (CCLAD), with constant and controlled rate of flow, present a painless alternative. The present study aimed to compare anxiety and pain perceived with conventional and computerized systems, for different stages of anesthesia delivery when administering various nerve blocks. Methods: One hundred patients requiring bilateral LA participated in the study. One side was anesthetized using one system and the contralateral side was anesthetized using the other, in two separate appointments. Patients assigned anxiety scores on a 5-point scale and used the visual analogue scale (VAS) for pain determination at needle insertion, during delivery of anesthetic solution, immediately after injection, and at the end of the periodontal procedure. Each patient's preference for the delivery system of future injections was also recorded. Results: Patients reported significantly lower anxiety levels with CCLAD compared to the syringe. Significantly lower mean VAS scores for anesthesia deposition, pain immediately after, and at the end of the periodontal procedure were also noted. However, pain at needle insertion was comparable between the two systems, with no statistical significance. Overall, 64.4% patients preferred CCLAD for future anesthesia. Conclusion: Lower pain perceived with CCLAD and higher preference for the system suggest that CCLAD should replace conventional syringes to allow pain-free dental treatment.