• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.275-278
• /
• 2013

• Journal of Gastric Cancer
• /
• 제17권2호
• /
• pp.173-179
• /
• 2017

Purpose: To report our experience of endoscopic botulinum toxin injection in patients who experienced severe delayed gastric emptying after pylorus-preserving gastrectomy (PPG). Materials and Methods: We reviewed the medical records of 6 patients who received the botulinum toxin injection. They presented with severe delayed gastric emptying in the early postoperative period. Endoscopic botulinum toxin was administered as 4 injections of 25-50 IU into each of the 4 quadrants of the prepyloric area. Results: All botulinum toxin injections were successful without any complications, enabling 5 patients to tolerate soft solid diets and one to tolerate a soft fluid diet within 10 days. The endoscopic criteria of 4 patients improved. Symptom recurrence caused 2 patients to undergo repeat injections that were successful. The median follow-up period was 27 months, and all patients could ingest normal regular diets at the last follow-up. Conclusions: Endoscopic botulinum toxin injection is a feasible treatment option for early delayed gastric emptying after PPG.

• Molecules and Cells
• /
• 제37권4호
• /
• pp.345-355
• /
• 2014

Mitigating secondary delayed neuronal injury has been a therapeutic strategy for minimizing neurological symptoms after several types of brain injury. Interestingly, secondary neuronal loss appeared to be closely related to functional loss and/or death of astrocytes. In the brain damage induced by agonists of two glutamate receptors, N-ethyl-D-aspartic acid (NMDA) and kainic acid (KA), NMDA induced neuronal death within 3 h, but did not increase further thereafter. However, in the KA-injected brain, neuronal death was not obviously detectable even at injection sites at 3 h, but extensively increased to encompass the entire hemisphere at 7 days. Brain inflammation, a possible cause of secondary neuronal damage, showed little differences between the two models. Importantly, however, astrocyte behavior was completely different. In the NMDA-injected cortex, the loss of glial fibrillary acidic protein-expressing ($GFAP^+$) astrocytes was confined to the injection site until 7 days after the injection, and astrocytes around the damage sites showed extensive gliosis and appeared to isolate the damage sites. In contrast, in the KA-injected brain, $GFAP^+$ astrocytes, like neurons, slowly, but progressively, disappeared across the entire hemisphere. Other markers of astrocytes, including $S100{\beta}$, glutamate transporter EAAT2, the potassium channel Kir4.1 and glutamine synthase, showed patterns similar to that of GFAP in both NMDA- and KA-injected cortexes. More importantly, astrocyte disappearance and/or functional loss preceded neuronal death in the KA-injected brain. Taken together, these results suggest that loss of astrocyte support to neurons may be a critical cause of delayed neuronal death in the injured brain.

• Archives of Plastic Surgery
• /
• 제51권1호
• /
• pp.20-26
• /
• 2024

The etiology and pathophysiology of delayed inflammatory reactions caused by hyaluronic acid fillers have not yet been elucidated. Previous studies have suggested that the etiology can be attributed to the hyaluronic acid filler itself, patient's immunological status, infection, and injection technique. Hyaluronic acid fillers are composed of high-molecular weight hyaluronic acids that are chemically cross-linked using substances such as 1,4-butanediol diglycidyl ether (BDDE). The mechanism by which BDDE cross-links the two hyaluronic acid disaccharides is still unclear and it may exist as a fully reacted cross-linker, pendant cross-linker, deactivated cross-linker, and residual cross-linker. The hyaluronic acid filler also contains impurities such as silicone oil and aluminum during the manufacturing process. Impurities can induce a foreign body reaction when the hyaluronic acid filler is injected into the body. Aseptic hyaluronic acid filler injections should be performed while considering the possibility of biofilm formation or delayed inflammatory reaction. Delayed inflammatory reactions tend to occur when patients experience flu-like illnesses; thus, the patient's immunological status plays an important role in delayed inflammatory reactions. Large-bolus hyaluronic acid filler injections can induce foreign body reactions and carry a relatively high risk of granuloma formation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권9호
• /
• pp.911-917
• /
• 2015

본 논문에서는 함정용 디젤연료를 단기통 커먼레일 디젤엔진에 적용하여 연료분사압력 변화에 따른 분사율 특성, 거시적 분무 특성 및 연료분사시기와 연료압력변화에 따른 연소 및 배기가스 배출특성을 분석하는데 초점을 두었다. 분사율 특성은 Bosch법을 적용한 분사율 측정 시험 장치를 이용하여 분석하였고, 거시적 분무 특성은 정적용기 및 초고속 카메라를 이용하여 분석하였다. 또한, 연료분사시기 및 연료압력 변화를 정밀하게 제어할 수 있는 단기통 엔진을 이용하여 연소 및 배기가스 배출특성을 분석하였다. 30MPa과 50MPa의 분사조건에서 초기 분사율은 50MPa의 분사조건에서 크게 나타났으며, 분무 발달(투과) 또한 동일시간대에서 큰 것으로 분석되었다. 연료분사시기가 지각될수록 실린더 내부 최대 압력과 최대 열발생량은 떨어지는 경향으로 나타났으며, 고압분사조건에서 실린더 내부 최대압력과 최대 열발생량은 다소 큰 것으로 분석되었다. 고압분사조건에서 도시평균유효압력은 낮은 것으로 분석되었고, 연료분사시기가 TDC 쪽으로 지각될수록 도시평균유효압력 및 토크는 증가하는 것으로 나타났다. 연료분사시기가 $BTDC20^{\circ}$(30MPa)와 $BTDC15^{\circ}$(50MPa)에서 질소산화물 발생수준이 가장 높았으며, 일산화탄소는 $BTDC30^{\circ}$를 기준으로 지각될수록 저감되었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.80-83
• /
• 2003

Transcribability of pit or land groove structures in replicating an optical disk substrate greatly affects the performance of a high-density optical disk. However, a solidified layer, generated during the polymer filling, deteriorates transcribability because the solidified layer prevents the polymer melt in filling the sub-micro patterns. Therefore, the development of the solidified layer during filling stage of injection molding must be delayed. For this delay, passive heating by insulation layer has been used. In the present study, to examine the development of the solidified layer delayed by passive heating, the flow of polymer melt with passive heating was analyzed. Passive heating markedly delayed the development of the solidified layer, reduced the viscosity of the polymer melt, and increased the fluidity of the polymer melt in the vicinity of the stamper surface with the sub-micro patterns. As a result, we predict that passive heating can improve transcribability of an optical disk substrate. To verify our prediction, we fabricated an optical disk substrate by using passive heating of a mold and measured the transcribability.

• 소성∙가공
• /
• 제13권1호
• /
• pp.39-44
• /
• 2004

Transcribability of pit or land groove structures in replicating an optical disk substrate greatly affects the performance of a high-density optical disk. However, a solidified layer, generated during the polymer filling, deteriorates transcribability because the solidified layer prevents the polymer melt from filling the sub-micro patterns. Therefore, the development of the solidified layer during filling stage of injection molding must be delayed. For this delay, passive heating by insulation layer has been used. In the present study, to examine the development of the solidified layer delayed by passive heating, the flow of polymer melt with passive heating was analyzed. Passive heating markedly delayed the development of the solidified layer, reduced the viscosity of the polymer melt, and increased the fluidity of the polymer melt in the vicinity of the stamper surface with the sub-micro patterns. As a result, we predict that passive heating can improve transcribability of an optical disk substrate. To verify our prediction, we fabricated an optical disk substrate by using passive heating of a mold and measured the transcribability of an optical disk substrate.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.194.2-195
• /
• 2003

Phenylpropanoids(PP), C6-C3 compounds, are widely distributed in many plants. In this experiments, effect of PP on sheep red bood cells (sRBC)-induced delayed type hypersensitivity (DTH) were studied in ICR male mice. SRBC were challenged by i.p. injection at two weeks after sensitization of Lp. injection of sRBC. Five days after the challenge of antigen, paw edema induced 24 hours after the last challenge by DTH, respectively. (omitted)

• 약학회지
• /
• 제43권1호
• /
• pp.98-103
• /
• 1999

Effects of Astragali Radix extract (AG) on the cell mediated-and nonlpecific immunotoxic responses of zinc chloride (Zn) were studied usign ICR mice. Mice were divided into 4 groups (10 mice/group), and Zn was given to the mice 1 hr after i.p. injection with 0.5g/kg of AG by i.p. injection daily for 10 days at a dose of 25 mg/kg. Immune responses on the responses on the relative weight of thymus, delayed-type hypersensitivity to SRBC (DTH), phagocytic activity and circulating leukocytes were evaluated. Zn treatment decreased body weight gain, the relative weight of thymus, DTH and circulating leukocytes compared with those in controls. AG treatment increased DTH, phagocytic activity and circulating leukocytes compared with those in controls. Combination of AG and Zn increased DTH and circulating leukocytes compared with those in controls, but decreased body weight gain and the relative weight of thymus. These findings indicated that AG decreased immunotoxicity of Zn on the DTH and circulating leukocytes.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.126.1-126.1
• /
• 2003

Compound-A is a phenylpropanoid isolated from Arctium lappa fruit. In this experiments, effect of Compound-A on sheep red bood cells (sRBC) - induced delayed type hypersensitivity (DTH) were studied in ICR male mice and determined the Rosette Forming Cells (RFC). Two weeks after sensitization of i.p. injection of sRBC (4$\times{10}^8$ cells), ICR male mice were challenged by i.p. injection of sRBC (2\times{10}^8$ cells). Five days the challenge of antigen, paw edema induced twenty-four hours after the last challenge by DTH. (omitted)