• Fire Science and Engineering
• /
• v.13 no.1
• /
• pp.37-47
• /
• 1999

The spreading fire of very small floating particles after they are ignited is fast and t therefore dangerous. The research on this area has been limited to experiments and global simulations which treat them as dusts or gaseous fuel with certain concentration well m mixed with air. This research attempted micro-scale analysis of ignition of those particles modeling them as liquid droplets. For the beginning, the in-line array of fuel droplets is modeled by two-dimensional, unsteady conservation equations for mass, momentum, energy and species transport in the gas phase and an unsteady energy equation in the liquid phase. They are solved numerically in a generalized non-orthogonal coordinate. The single step chemical reaction with reaction rate controlled by Arrhenius’ law is assumed to a assess chemical reaction numerically. The calculated results show the variation of temperature and the concentration profile with time during evaporation and ignition process. Surrounding oxygen starts to mix with evaporating fuel vapor from the droplet. When the ignition condition is met, the exothermic reactions of the premixed gas initiate a and burn intensely. The maximum temperature position gradually approaches the droplet surface and maximum temperature increases rapidly following the ignition. The fuel and oxygen concentration distributions have minimum points near the peak temperature position. Therefore the moment of ignition seems to have a premixed-flame aspect. After this very short transient period minimum points are observed in the oxygen and fuel d distributions and the diffusion flame is established. The distance between droplets is an important parameter. Starting from far-away apart, when the distance between droplets decreases, the ignition-delay time decreases meaning faster ignition. When they are close and after the ignition, the maximum temperature moves away from the center line of the in-line array. It means that the oxygen at the center line is consumed rapidly and further supply is blocked by the flame. The study helped the understanding of the ignition of d droplet array and opened the possibility of further research.

• Research in Plant Disease
• /
• v.14 no.3
• /
• pp.159-164
• /
• 2008

Crown gall of rose (Rosa hybrida) was observed in greenhouse during 2003-2007. The average disease incidence was up to 38.1 % and was more severe in hydroponic culture as compared to soil culture. The typical gall symptom occurred mainly on the root, crown, or both, and resulted on poor rooting, growth retardation and yield loss. The reduction rate of rooting influenced by crown gall was 57.5% as compared to healthy plants on nursery stock. The location of gall formation in the plant influenced growth vigor resulting in symptoms such as poor shooting. Healthy plants produced 19.1 flowers/$m^2$, while diseased plants produced 9.5 flowers/$m^2$ during the same cultivation period. Moreover, the number of days to flowering was longer for the diseased plants than for healthy plants - 51.2 days and 39.8 days for first harvest, and 60.6 days and 52.1 days for the second harvest, respectively. Conclusively, infection on the basal stem caused serious loss of the number of shoot formation; yield loss of cut flower was 38.7% due to crown gall infection and delay of harvesting time about 8-10 days.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.2
• /
• pp.86-94
• /
• 2000

In order to extract the spatio-temporal characteristics of long-term variability of the net heat flux on the sea surface in the East Asian marginal seas, empirical orthogonal function (EOF) analysis was conducted using data set calculated every 12 hours interval during 1978-1995. Among the first three modes explaining 73% of the total variance, the first mode having high peak at 1 year period indicates high variability area around the Sandong Peninsula and central and northeastern part of the East Sea. In the second mode which has spatial distribution of dipole type at the north and south, the peaks appear at 3.6 year and 2.3 year cycles. Time coefficient of the second EOF is believed to have close relation with the E1 Nino and has out-of-phase variation with NINO3 SST. Lagged correlation between NINO3 SST and time coefficient of the second EOF indicates four month time delay in the NINO3 SST. In the third mode which has opposite sign at the east and west, the periodicity of 6-9 year cycle has relatively clear appearance compared to other two EOFs. Also, high heat loss exceeding 800 W/$m^{2}$ in winter time occured at the south part of the Sandong Peninsula and Vladivostok. It reveals more frequent occurrence of about two times at the Sandong Peninsula than Vladivostok. The event is concentrated in January at Vladivostok, but it occurs primarily in December and January at the Sandong Peninsula.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.2
• /
• pp.102-108
• /
• 2003

This experiment was conducted to evaluate the diversity and purity of the Korean ginseng (Panax gjnseng) lines developed by the pure line selection using RAPD markers. Four primer (OPA 19, OPM 11, URP 3 and UBC 98) out of the 48 primer tested produced band which showed within-line polymorphisms at least in one line. Within-line polymorphisms were detected in six lines by OPA 19, in four lines by URP 03, in five lines by OPM 11, and in one line by UBC 98 respectively. Five plants obtained from the commercial cultivar 'Cheonpung' were differentiated using the primers OPA 19 and OPM 11. Five plants obtained from the 'Yeonpung were differentiated using the primer OPM 11. Detection of within-line RAPD polymorphisms might be attributed to the fact that cross pollination appear in P. gjnseng and a long period of three to four years required to reach the reproductive stage thereby delay the process to homozygosity.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.15 no.1
• /
• pp.9-17
• /
• 2015

Glycogen storage disease (GSD) type Ia is rare inborn metabolic disorder, caused by glucose-6-phosphatase deficiency. It characterized by hepatomegaly, hypoglycemia, lactic acidosis, hypertriglyceridemia, and hyperuricemia and it is usually manifested in the infantile period. In addition, it is also associated with growth failure, pubertal delay, anemia, platelet dysfunction, osteopenia, and pulmonary hypertension. Hepatocellular adenoma and renal dysfunction are frequent late complications. Delayed diagnosis and inappropriate therapy lead to many complications such as growth failure, osteoporosis, refractory gout, renal failure, hepatocellular carcinoma (HCC), and pulmonary hypertension. Here, two Korean sisters diagnosed with GSD Ia, aged 33 and 36 respectively, were described and compared to recent articles about four adults with late diagnosis of GSD Ia. One sister had typical manifestations of GSD Ia including short stature (height, 145 cm), multiple hepatic adenoma, chronic kidney disease stage IV, and severe osteoporosis, whereas the older sister had normal stature (162 cm), one tiny hepatic nodule, and normal renal function. Direct sequencing of G6PC in two sisters identified a homozygous splicing mutation, c.645G>T, which is a prevalent mutation in Korea. Interestingly, our cases and four adults from recent reports had asymptomatic mild hypoglycemia and various manifestations including renal failure, HCC, fatty liver, or uncontrolled hyperlipidemia. These adult cases represent not only heterogenous phenotype to genotype within family members with GSD Ia but also long-term complications such as gouty arthritis, renal failure, and osteoporosis in untreated adult GSD Ia patients. In addition, lactic academia and hypertriglyceridemia are good markers of GSD Ia to distinguish from metabolic disease.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.166-171
• /
• 2017

For high-quality colored rice production, the cultivation environment is a critical factor. The major environmental factor is temperature, which includes the accumulated and average temperature during vegetative and reproductive stages. Generally, during the cultivation period, the temperature can be controlled by shifting the transplanting date. This study was carried out to determine the optimum transplanting date for high-quality red-colored rice production. Four red-colored rice varieties (Jeokjinju, Jeokjinjuchal, Hongjinju, and Gunganghongmi) were used as test materials. The transplanting dates were May 20 and June 5, 20, and 30 in 2015~2016. The most variable factor controlled by the transplanting date was the grain filling rate. The varieties transplanted on June 30 showed low yields owing to the decrease in the grain filling rate. In contrast, the polyphenol content increased with increasing delay in the transplanting date. Collectively, these two results indicate that the optimum transplanting date was June 20. The average temperature for 30 days after the heading date (30DAH) highly affected the polyphenol content. A lower temperature during the 30DAH induced higher polyphenol contents but also caused low yield. The optimum 30DAH temperature for obtaining a higher yield and polyphenol content was $22{\sim}23^{\circ}C$. Using the average 30DAH and accumulated temperatures, the optimum transplanting date was calculated as June 18 to 24 in Miryang region. The optimum transplanting date of Kyeungsangnamdo region was approximately mid-June to early July, and that of Kyeungsangbukdo region was approximately early to mid-June.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.9
• /
• pp.827-832
• /
• 2012

In this paper, we will design the speed measurement board of LEO Satellite's reaction wheel which has two speed measuring methods as M-Method type and T-Method type. therefore we can use the advantage of two methods. and we will verify the availability of design on the on-board computer at the real LEO Satellite(KOMPSAT-3). In the reaction wheels satellite that can change the satellite's attitude is one of the leading drivers by the rotational inertia of the motor will perform attitude control. Reaction methods for detecting wheel rotation speed generated during a certain period T internal reaction wheel tacho pulse counting M-Method to detect wheel speed and wheel tacho pulses are generated by measuring the time between the detection rate can be divided into T-Method. M-method is simple to implement and benefit measurement time is constant, but slow fall in the velocity measurement accuracy is a disadvantage. In contrast, the time between tacho pulses to measure the T-Method to measure the precise speed at low speed and to measure the time delay is small, has the advantage. However, this method also in the actual implementation and the complexity of the operation at different speeds depending on the speed of operation has the disadvantage.

• Physical Therapy Korea
• /
• v.5 no.3
• /
• pp.1-10
• /
• 1998

In motor learning, the relative frequency of external feedback is the proportion of external feedback presentations divided by the total number of practice trials. In earlier studies, increasing the percentage of body weight loading on the affected leg of hemiplegic patients, external feedback was continuously produced as the patient attempted to perform a movement. This feedback was produced to enhance the learning effect. However, recent studies in nondisabled populations have suggested that compared with 100% relative frequency conditions, practice with lower relative frequencies is more effective. My study compared the effect of 100% relative frequency conditions with 67% relative frequency conditions to determine what effect they exerted on motor learning for increasing the percentage of body weight loading on the affected lower limbs of patients with hemiplegia. Twenty-four hemiplegic patients were randomly assigned to one of two experimental groups. Each group practiced weight transfer motor learning on a machine. During practice, visual feedback was offered to all subjects. The experiment was carried out with full visual feedback for patients in group one but only 67% visual feedback for patients in group two. The percentage of loading on the affected leg was recorded four times: before learning (baseline value), immediately after learning, 30 minutes after learning, 24 hours after learning. The results were as follows: 1. In the 100% visual feedback group, the percentage of loading on the affected leg increased significantly in all three testing modes over the baseline value. 2. In the 67% visual feedback group, the percentage of loading on the affected leg increased significantly in all three measurements. 3. Immediately after learning, the learning effect was not significantly different between the two groups, but was significantly greater after both the 30 minutes delay and the 24 hours period. These results suggest that the 33% reduction in the provision of visual feedback may enhance the learning effect of increasing the percentage of body weight loading on the affected leg in patients with hemiplegia.

• Environmental and Resource Economics Review
• /
• v.19 no.2
• /
• pp.361-382
• /
• 2010

In 2005, the Korean government decided to postpone the introduction of competition up to 2009 in the power plant service industry. Thus, the purpose of this study is to analyze the efficiency changes and the determinants of international competitiveness of Korean power plant service industry by the comparison between before and after 2006. The sample used in the estimation of efficiency is six firms III Korean power plant service sector for the period of 2003~2008. According to the results, technical efficiency before 2006 (2003~2005) is 0.865 and that after 2005 (2006~2008) is 0.947, which implies that efficiency has been improved after the delay of introduction of competition. In addition, according to the analyses based on the diamond model of Porter using survey data, demand condition has been ranked first in the determinants of international competitiveness. The second and the third important conditions are government and input factor ones. Firm's strategy/structure/competitiveness condition is the most weak condition. Therefore, it would be necessary for firms to improve this condition for competitiveness.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.225-230
• /
• 2005

At present, there are several problems related with sand mat which is used as a way to accelerate consolidation settlement, to act like an underground drainage layer and to increase trafficability simultaneously. First of all, the unbalance of the demand and supply of sand is one of the biggest problems, which causes not only price rise but also delay of the term of the total construction work. Secondly, the damage of ecosystem and scenery is triggered by thoughtless sand dredging or mining. So, the need that sand mat should be replaced with a new environmentally friendly material has been increased. Fiber mat may be one of the proper materials that suits the need. Therefore, we intended to compare the drainage properties of sand mat with those of fiber mat by experimental model tests. On the basis of the test results, fiber mat took shorter period of consolidation than sand mat and the amount of settlement in the farmer showed a little bit bigger than in the latter. As a conclusion, the substitutability of sand mat with fiber mat could be placed highly in view of drainage efficiency. Furthermore, when fiber mat is used, it has an advantage that spoiled soil of the construction site or nearby site can be used for the purpose of increasing trafficability in addition to a role of drainage layer.