• The KIPS Transactions:PartA
• /
• v.11A no.1
• /
• pp.49-56
• /
• 2004

The performance of the multiprocessor systems is limited by the several factors. The system performance is affected by the processor speed, memory delay, and interconnection network bandwidth/latency. By the evolution of semiconductor technology, off the shelf microprocessor speed breaks beyond GHz, and the processors can be scalable up to multiprocessor system by connecting through the interconnection networks. In this situation, the system performances are bound by the latencies and the bandwidth of the interconnection networks. SCI, Myrinet, and Gigabit Ethernet are widely adopted as a high-speed interconnection network links for the high performance cluster systems. Performance improvement of the interconnection network can be achieved by the bandwidth extension and the latency minimization. Speed up of the operation clock speed is a simple way to accomplish the bandwidth and latency betterment, while its physical distance makes the difficulties to attain the high frequency clock. Hence the system performance and scalability suffered from the interconnection network limitation. Duplicating the link of the interconnection network is one of the solutions to resolve the bottleneck of the scalable systems. Dual-ring SCI link structure is an example of the interconnection network improvement. In this paper, I propose a network topology and a transaction path algorism, which optimize the latency and the efficiency under the duplicated links. By the simulation results, the proposed structure shows 1.05 to 1.11 times better latency, and exhibits 1.42 to 2.1 times faster execution compared to the dual ring systems.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.1
• /
• pp.65-72
• /
• 2008

The purpose of the HLW deep geological disposal is to isolate and to delay the radioactive material release to human beings and the environment for a long time so that the toxicity does not affect to the environment. The main requirements for the HLW repository design is to keep the buffer temperature below $100\;^{\circ}C$ in order to maintain its integrity. So the cooling time of spent fuels discharged from the nuclear power plant is the key consideration factors for efficiency and economic feasibility of the repository. The disposal tunnel/disposal hole spacing, the disposal area and thermal capacity required for the deep geological repository layout which satisfies the temperature requirement of the disposal system is analyzed to set the optimized spent fuels cooling time. To do this, based on the reference disposal concept, thermal stability analyses of the disposal system have been performed and the derived results have been compared by setting the spent fuels cooling time and the disposal tunnel/disposal hole spacing in various ways. From these results, desirable spent fuels cooling time in view of disposal area is derived. The results shows that the time reaching the maximum temperature within the design limit of the temperature in the disposal site is likely shortened as the cooling time of spent fuels becomes short. Also it seems that the temperature-rising and-dropping patterns in the disposal site are of smoothly varying form as the cooling time of spent fuels becomes long. In addition, it is revealed that a desirable cooling time of spent fuels is approximately 40-50 years when spent fuels are supposedly disposed in the deep geological disposal site with its structural scale under consideration in this study.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.3
• /
• pp.217-224
• /
• 2008

In deep geological disposal system, the integrity of a disposal canister having spent fuels is very important factor to assure the safety of the repository system. This disposal canister is one element of the engineered barriers to isolate and to delay the radioactivity release from human beings and the environment for a long time so that the toxicity does not affect the environment. The main requirement in designing the deep geological disposal system is to keep the buffer temperature below 100$^{\circ}C$ by the decay heat from the spent fuels in the canister in order to maintain the integrity of the buffer material. Also, the disposal canister can endure the hydraulic pressure in the depth of 500 m and the swelling pressure of the bentonite as a buffer. In this study, new concept of the disposal canister for the CANDU spent fuels which were considered to be disposed without any treatment was developed and the thermal stability and the structural integrity of the canister were analysed. The result of the thermal analysis showed that the temperature of the buffer was 88.9$^{\circ}C$ when 37 years have passed after emplacement of the canister and the spacings of the disposal tunnel and the deposition holes were 40 m and 3 m, respectively. In the case of structural analysis, the result showed that the safety factors of the normal and the extreme environment were 2.9 and 1.33, respectively. So, these results reveal that the canister meets the thermal and the structural requirements in the deep geological disposal system.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.13 no.2
• /
• pp.45-69
• /
• 2002

This study is designed to examine feasibility and limitation of outsourcing in cooking Western food in a hotel, to interpret importance of outsourcing(eg. outside order, outside procurement, outside supply) in a broad sense in order to reinforce the core capacity in the cooking department, and to know whether the cooking human power is efficiently used and how much the chefs recognize outsourcing of food materials. As many companies conduct restructuring to cut down its size, the reduction of human power led the Western food cooking in the hotel to lower core capacities, lower quality, and lower efficiency. In addition, the sagging morale of chefs undermined creativity. To change from the traditional kitchen to an economic kitchen needs to look into importance of outsourcing, cognitive attitude of chefs, relation with outside suppliers. Here suggests performance of positive changes in the structure The study examined feasibility and limitation of outsourcing in the hotel kitchen as well as chefs' cognitive attitude toward outsourcing of food materials to reinforce core capabilities of the hotel kitchen. 1. Companies of outsourcing are selected according to variability of price conditions, flexibility of contract conditions, popularity of the outsourcing company, and reputation of the outsourcing company. 2. The importance of outsourcing in the Western food cooking is divided into 4 factors such as standard of selecting outsourcing companies, policies of cooking manu, quality of cooking, and quantity of cooking. 3. The most feasible section in outsourcing of food materials is a process of kneading flour for bread, which shows that many Western-food chefs expect to put higher possibility of outsourcing on the kneading. In other words, when it comes to confectionery and bakery, there are many outside expert processing companies supplying high quality products. In the order of outsourcing feasibility, sauce is followed by processed vegetable, garnish of main dish, and soup. The least feasible section in outsourcing of food materials is appetize. Appetize includes a concept of a improvised dish and needs speed. Due to its color, freshness, and sensibility of taste, the appetize plays a key role in the Western food cooking. 4. When outsourcing is taken in place, the highest risk is to lower the inner cooking skills. Therefore chefs in charge of the Western food sequently recognize both internal problems including storage of cooking skills, unstability of layoffs, and loss of cooperation between departments, and external problems including inferior goods, difficulty of differentiating manu, delay of delivery, and expiration date. It shows that most of the Western food chefs consider risks of the internal problems at first. 5. A effective outsourcing needs appropriate selection of outsourcing companies, maintenance of credibility, active communication, check and management of hygiene. However regardless of their position or career, chefs in charge of the Western food have the same cognitive attitude toward selecting successful outsourcing companies after the outsourcing system is enforced. The core of cooking, or a final stage in the full process of so-called artistic cooking, should be treated with insourcing. Reduction of several cooking processes resulted in shortened cooking time, increased efficiency, faster cooking, cutting the waiting-lines, and finally more room for customers. The outsourcing system can reduce or eliminate the following processes in cooking: buying various food materials, checking, storing, preparing, and processing. Especially in the Western food cooking department of a hotel, the outsourcing system should be enforced to make an economic kitchen and to efficiently manage it. Wow it's time to change from the traditional kitchen to an economic kitchen in the hotel cooking department. For that, the cooking department should become a small but strong organization by outsourcing except its core work.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.750-756
• /
• 2008

Supernumerary teeth are frequently found in the anterior portion of the maxilla and develop as a result of abnormal proliferation of the dental lamina during tooth germ formation, caused by genetic or environmental factors. They may result in various complications, such as eruption interference, displacement, rotation of adjacent teeth, diastema, eruption into the nasal cavity, and development of dentigerous cyst. The optimal time for surgical extraction of supernumerary teeth has been a controversial issue. Someone prefer early surgical extraction because supernumerary teeth can cause eruption interference and displacement of adjacent teeth, eventually altering occlusion. Others prefer to delay surgical extraction until $8{\sim}10$ years of age in consideration of root maturation of the adjacent teeth and also patient's behavior. When surgical extraction of supernumerary teeth is postponed, there is possibility that impacted supernumerary teeth in the inverted or horizontal position move toward the nasal cavity, hard palate, or premolar area. When such intraosseous tooth migration is combined with the vertical growth of the maxilla, surgical approach becomes even harder. Therefore, possibility of intraosseous tooth migration should be considered as an important factor when deciding appropriate time for surgical extraction. We are presenting cases of mesiodens which showed intraosseous migration during $6{\sim}7$ years of follow-up period since the first diagnosis had been made at the $2{\sim}3$ years of age.

• Journal of Korean Academy of Nursing
• /
• v.5 no.1
• /
• pp.1-16
• /
• 1975

The newborn human is the only mammalian whose mother does not have a food supply ready for it's offspring at birth. From two to four days usually elapse before the mother's supply If milk appears, and during this period, some kind of artificial feeding should be supplied to the infants. Because of this factor, there has been continued debate fog the past hundreds of years as to when the first feeding should be started Accordingly, many experiments were carried out by scholars and because of these, Pre-lateral feedings were believed to be necessary. Many types of pre-lateral feedings were tried and the conclusion was reached that glucose water was the best food for the first infants'feedings. Traditionally, This has been started 12 hours after birth. The causes for the 12 hours delay were thought to (1) provide rest for the infants: (2) prevent regurgitation ana vomiting which tended to be prevalent during this tine: (3) in cases of low weight infants, prevention of aspiration pneumonia. From recent studies of newborn physiology and as pediatric medicine has been rapidly advancing, many studies hare been carried out concerning the improvement of infant nutrition and the early feeding of infants has been emphasized. This author believes it would be very beneficial to try two different kinds of feedings for the infant. (1) experimental feedings ana (2) comparative feeding, and during this period to investigate and compare the infants blood sugar level, hematocrit, gamma globulin level weight changes and to observe the infant reaction ill order to search for a more desirable feeding program. This study was conducted from January to March 1974 with data related to 40 healthy newborn infants (male 21, female 19: weight, 2.79∼4.20㎏ : gestation, 39∼40 weeks) born at Ewha Womens University Hospital and the results obtained were as follows : 1. At time of birth the blood sugar level from the cord sample averaged 88.99㎎/100㎖, but the blood sugar level rapidly dropped after 2 to 3 hours and reached the lowest point after 10 to 11 hours (54.48㎎/100㎖) and rose again by the 24 hour time period (76.80㎎/100㎖). Changes in the blood sugar level of the experiments: groups and the compare-five group was not significantly different until the 6 to 7 hour period, but by the 10 to 11 hour period the blood sugar levels of the experimental group (49,10㎎/100㎖) and the comparative group (49.70㎎/100㎖) were lower than the remainder of the experimental groups. 9. There ware no significant weight changes between the two groups. Average weight at birth was 3.35㎏, but at the 24 hours period birth weight averaged 3.29㎏. (1.8% reduction of birth weight). It continually lowered until at 48 hours, average weight was 3.26㎏ (2.7% reduction from birth weight.) 3. Hematocrit readings showed no significant difference between the groups. Hematocrit, the average value at birth, was 28.07% and abruptly elevated to average 64.35% at the 2 to 3 hour period, then slowly lowered to an average of 59.67% at the 6 to 7 hour period, 55.10% at the 10 to 11 hour period, ana 53.70% at the 24 hour period. 4. At birth, average gamma globulin value averaged 1,39㎎/100㎖. and at the 24 hour period averaged 1,52㎎/100㎖ revealing no significant difference between the two feeding groups. 5. Such factors as voiding, passing of meconium, regurgitation and vomiting showed no significance between the two feeding groups. However, the number of infants voiding and passing meconium in the experimental groups during the first 12 hours was slightly greater. In general there was an increased tendency for regurgitation and. vomiting among a small group of the infants during the first 24 hours which thereafter decreased. 6. Fluid intake averaged 24.38cc at the first feeding and increased to average 30.48cc at the third feeding and further increased to 73. 00cc at the fifteenth feeding. Finally it was suggested that the most reasonable method of early feeding is to give less than 25cc of 5% glucose water and/or 8% powdered milk at 8 to 9 flours after birth in order to prevent hypoglycemia and dehydration.

• Horticultural Science & Technology
• /
• v.35 no.2
• /
• pp.170-177
• /
• 2017

This study was conducted to estimate the light pollution damage caused by night-break lighting in 'Kyoho' grapes. Night irradiation was performed every night for four hours (10 p.m. to 2 a.m.) from the full bloom to the harvest stage using red, blue, and white lamps as artificial light. Fruit yield, soluble solid content, anthocyanin content, and chlorophyll a content were affected by night irradiation. The soluble solid content of the control was $17.5^{\circ}Brix$, approximately $1^{\circ}Brix$ higher than the red ($16.4^{\circ}Brix$), blue ($16.2^{\circ}Brix$), and white light treated grapes ($16.3^{\circ}Brix$). The anthocyanin content of the skin was also higher in the control at $4.08{\mu}g{\cdot}cm^{-2}$ compared to the red ($3.14{\mu}g{\cdot}cm^{-2}$), blue ($2.47{\mu}g{\cdot}cm^{-2}$), and white ($2.82{\mu}g{\cdot}cm^{-2}$) light treated samples. On the other hand, the chlorophyll a content of the control was the lowest at $0.268{\mu}g{\cdot}cm^{-2}$ as compared with the red ($0.339{\mu}g{\cdot}cm^{-2}$), blue ($0.345{\mu}g{\cdot}cm^{-2}$), and white ($0.372{\mu}g{\cdot}cm^{-2}$) light treated samples. Considering that higher soluble solid contents, higher accumulation of anthocyanin, and lower chlorophyll a contents are factors involved in fruit maturation, night irradiation may delay fruit maturation and red light treatment may result in decreased yield. Our results confirmed that night-break lighting regardless of the wavelength provoked light pollution in 'Kyoho' grapes. Therefore, fruit maturation may be poor in the presence of artificial light, including streetlamps, in neighboring vineyards.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.215-225
• /
• 2016

This study seeks to find an alternative to the requirement for proving the competitiveness of Korean performing arts before entering into the overseas market by deriving the factors causing entry into the market to be delayed based on an analysis of the current status. Between 2007 to 2014, the overseas revenues from Korean performing arts increased by 16.4% compared to the total amount of financial support, as the number of free performances given overseas and the average guaranteed number of performances overseas are both at a standstill. Also, the size of the audience increased by a mere 3.3 times, which is an even lower growth rate than that for the number of performances, 3.8 times, during the same period. Furthermore, the audience size per unit is suffering from long-term stagnation. The main causes are as follows: 1) applying one-dimensional methods to performing arts exchanges and expanding the overseas market, 2) the existing confused concepts between profit and non-profit contents, 3) the weaknesses of the market expansion strategy, because of programming practices focusing on providers, such as presenters and producers, rather than consumers. As a result, the necessary basic research, including consumer surveys, has not been done yet. In order to understand the implications of this analysis and solve the problem of the delayed overseas expansion of Korean performing arts, the Korean wave industry was examined as a representative example. Consumer surveys for the performing arts, possibly benchmarked to the "Korean Wave Consumer Survey Index (KWCSI)", are expected to be done in the near future. In addition, through the development of a specific consumer index of the performing arts, customized marketing strategies by continent and country need to be established. This empirical study of the overseas expansion of performing arts can be utilized as a bridge between the academic and real worlds. This work may also enable a variety of strategies to be established for the overseas expansion of the performing arts.

• Journal of the Society of Disaster Information
• /
• v.9 no.4
• /
• pp.449-461
• /
• 2013

As the hydrofluoric acid leak in Gumi-si, Gyeongsangbuk-do or hydrochloric acid leak in Ulsan, Gyeongsangnam-do demonstrated, chemical related accidents are mostly caused by large amounts of volatile toxic substances leaking due to the damages of storage tank or pipe lines of transporter. Safety assessment is the most important concern because such toxic material accidents cause human and material damages to the environment and atmosphere of the surrounding area. Therefore, in this study, a hydrofluoric acid leaked from a storage tank was selected as the study example to simulate the leaked substance diffusing into the atmosphere and result analysis was performed through the numerical Analysis and diffusion simulation of ALOHA(Areal Location of Hazardous Atmospheres). the results of a qualitative evaluation of HAZOP (Hazard Operability)was looked at to find that the flange leak, operation delay due to leakage of the valve and the hose, and toxic gas leak were danger factors. Possibility of fire from temperature, pressure and corrosion, nitrogen supply overpressure and toxic leak from internal corrosion of tank or pipe joints were also found to be high. ALOHA resulting effects were a little different depending on the input data of Dense Gas Model, however, the wind direction and speed, rather than atmospheric stability, played bigger role. Higher wind speed affected the diffusion of contaminant. In term of the diffusion concentration, both liquid and gas leaks resulted in almost the same $LC_{50}$ and ALOHA AEGL-3(Acute Exposure Guidline Level) values. Each scenarios showed almost identical results in ALOHA model. Therefore, a buffer distance of toxic gas can be determined by comparing the numerical analysis and the diffusion concentration to the IDLH(Immediately Dangerous to Life and Health). Such study will help perform the risk assessment of toxic leak more efficiently and be utilized in establishing community emergency response system properly.

• Journal of Arbitration Studies
• /
• v.14 no.1
• /
• pp.273-314
• /
• 2004

There is a belief in the construction industry that the traditional court system may not be an ideal forum to effectively and efficiently resolve construction disputes due to the protracted proceedings and the three tier appeal system resulting in a long delay in the final and conclusive settlement of the dispute, relatively high costs involved, the lack of requisite knowledge and experience in the relevant industry, etc. Hence, they assert that certain alternative dispute resolution ('ADR') methods, such as mediation, conciliation, arbitration or a new system for dispute settlement in the form of any combination thereof should be developed and employed for construction disputes so as to resolve them more promptly and efficiently to the satisfaction of all the disputants concerned. This paper discusses certain merits of such assertions and the need for additional considerations for effective resolution of the construction disputes in light of the complexity of the case, importance of expert witnesses, parties' relationship and non-level playing field of the construction industry and so on. At the same time, however, given the inherent nature of disputes rendering the parties involved in an adversarial position, it would rather be difficult, if not practically impossible, to satisfy all the parties concerned in the dispute. Accordingly, in this study, it is also purported to address the demerits of such assertions by studying the situation from a more balanced perspective, in particular, in relation to the operation of such ADRs. In fact, most of such ADRs as stipulated by special acts, such as the Construction Industry Basic Act of Korea, in the form of mediation or conciliation, have failed to get support from the industry, and as a result, such ADRs are seldom used in practice. Tn contrast, the court system has been greatly improved by implementing a new concentrated review system and establishing several tribunals designed to specialize in the review and resolution of specific types of disputes, including the construction disputes. These improvements of the court system have been warmly received by the industry. Arbitration is another forum for settlement of construction disputes, which has grown and is expected to grow as the most effective ADR with the support from the construction industry. In this regard, the Korean Commercial Arbitration Board ('KCAB') has established a set of internal rules end procedures in operation to efficiently handle construction disputes. Considering the foregoing, this paper addresses the most important elements of the arbitration, i.e., arbitration agreement and arbitral award, primarily focusing on the domestic arbitrations before the KCAB. However, since this parer is prepared for presentation at the construction disputes seminar for the public audience, it is not intended for academic purposes, nor does it delve into any specific acadcmic issues. Likewise, although this paper addresses certain controversial issues by way of introduction, it mainly purports to facilitate the understanding of the general public, including the prospective arbitrators on the KCAB roster without the relevant legal education and background, concerning the importance of the integrity of the arbitration agreement and the arbitral award. In sum, what is purported in this study is simply to note that there are still many outstanding issues with mediation, conciliation and arbitration, as a matter of system, institutional operation or otherwise, for further study and consideration so as to enhance them as effective means for settlement of construction disputes, in replacement of or in conjunction with the court proceeding. For this purpose, it is essential for all the relevant parties, including lawyers, engineers, owners, contractors and social activists aiming to protect consumers' and subcontractors' interests, to conduct joint efforts to study the complicated nature of construction works and to develop effective means for examination and handling of the disputes of a technical nature, including the accumulation of the relevant industrial data. Based on the foregoing, the parties may be in a better position to select the appropriate dispute resolution mechanism, a court proceeding or in its stead, an effective ADR, considering the relevant factors of the subject construction works or the contract structure, such as the bargaining position of the parties, their financial status, confidentiality requirements, technical or commercial complexity of the case at hand, urgency for settlements, etc.