• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.5
• /
• pp.187-192
• /
• 2004

We try to use isopropanol which has low boiling point to prepare ZnO thin films at low temperature. ZnO thin films were prepared by sol-gel spin-coating method using zinc acetate dehydrate-isopropanol-monoethanolamine (MEA) solution. The c-axis preferred orientation and optical properties of ZnO films with preheating temperature have been investigated. ZnO thin films were preheated at 200 to $300^{\circ}C$ with an interval of $25^{\circ}C$ and post-heated at $650^{\circ}C$. The ZnO film preheated at $275^{\circ}C$ and post-heated at $650^{\circ}C$ was highly oriented along c-axis (002) plane, and the surface with homogeneous and dense microstructures was formed having nano-sized grains. The optical transmittance was above 90 % in the visible range and exhibited absorption edges at 368 nm wavelength.

• Journal of the Mineralogical Society of Korea
• /
• v.10 no.2
• /
• pp.82-96
• /
• 1997

Buserties are known to have layer structures with variable C dimension which depended on the nature interlayer catious and contents of water molecular between edge-sharing [MnO6] octabedral layers. Na-, Ca-, Mg-, and Zn-buserties were synthesized in the laboratory and studied for to know the structural states of water molecules and the role of catious in the buserite structures. With lowering the relative humidity(RH), Ca-buserite begins to dehydrate at 27% RH and proceeds further very slowly. Mg- and Zn- buserite also slow dehydration above 2% RH. With gradual ineveasing temperature Ca- and Zn-buserite show abrupt shifting of 10$\AA$ peak (10$\AA$-phare) toward 7$\AA$ peak. All of 7$\AA$-phare are further dehydrated to 5$\AA$-phare by further increasing temperature. It suggests that interlayer catious play a crucial role in the dehydration behavious of buserites. Simulation of one-dimensional X-ray diffraction patterns of buserties show that buserites have three layers of water molecules of different types: the very loosely bound and tightly bend waters, instead of two layers that was regarded by previous authers. The very loosely bound water is sited I open space of the interlayer, the loosely bound water is bound on the tightly bound water by hydrogen bond, and the tightly bond water in coodinately bound on the interlayer catious.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.7
• /
• pp.432-436
• /
• 2017

IZO transistors with $Al_2O_3$ as gate dielectrics have been investigated. To improve permittivity in an ambient dielectric layer, we grew $Al_2O_3$ by atomic layer deposition directly onto the substrates. Then, we prepared IZO semiconductor solutions with 0.1 M indium nitrate hydrate [$In(NO_3)_3{\cdot}xH_2O$] and 0.1 M zinc acetate dehydrate [$Zn(CH_3COO)_2{\cdot}2H_2O$] as precursor solutions; the IZO solution made with a molar ratio of 7:3 was then prepared. It has been found that these oxide transistors exhibit low operating voltage, good turn-on voltage, and an average field-effect mobility of $0.90cm^2/Vs$ in ambient conditions. Studies of low-voltage driving of IZO transistors with atomic layer-deposited high-k $Al_2O_3$ as gate dielectric provide data of relevance for the potential use of these materials and this technology in transparent display devices and displays.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.7
• /
• pp.437-440
• /
• 2017

We report on amorphous thin-film transistors (TFTs) with indium zinc oxide (IZO) channel layers that were fabricated via a solution process. We prepared the IZO semiconductor solution with 0.1 M indium nitrate hydrate and 0.1 M zinc acetate dehydrate as precursor solutions. The solution- processed IZO TFTs showed good performance: a field-effect mobility of $7.29cm^2/Vs$, a threshold voltage of 4.66 V, a subthreshold slope of 0.48 V/dec, and a current on-to-off ratio of $1.62{\times}10^5$. To investigate the static response of our solution-processed IZO TFTs, simple resistor load-type inverters were fabricated by connecting a $2-M{\Omega}$ resistor. Our IZOTFTbased N-MOS inverter performed well at operating voltage, and therefore, isa good candidate for advanced logic circuits and display backplane.

• Solar Energy
• /
• v.15 no.1
• /
• pp.73-84
• /
• 1995

The present paper is on the utilization of a thermal decomposition reaction $Ca(OH)_2=CaO+H_2O$, for thermal energy storage. One of the important problems in this case is how to heat up and decompose the particle of $Ca(OH)_2$ effectively where the thermal conduction is poor. In this study, the effects of Cu-plates which are placed in the $Ca(OH)_2$ packed bed as heat transfer fins are investigated experimentally. The results show that the Cu-plates are very effective for heat transfer and the thermal decomposition in the $Ca(OH)_2$ packed bed. The amount of time to dehydrate took less than a half than that without fins under the conditions of this study.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.25.2-25.2
• /
• 2009

최근 아연산화물과 같은 무기산화물 박막 트랜지스터를 디스플레이의 구동 소자, RFID, 스마트 창으로 활용하기 위한 연구가 많이 이루어지고 있다. 특히, 산화아연 박막 트랜지스터는 기존의 비정질 실리콘이나 저온 제작된 다결정 실리콘을 active layer로 사용해 제작된 소자에 비하여 AMOLED나 AMLCD를 구동하기 충분한 전자 이동도, 환경적으로 안정한 특성을 보이고 비교적 저렴한 가격으로 제작 가능하며 넓은 밴드갭으로 인하여 가시광선 영역에서 투명한 특성을 보인다. 본 연구에서는 Zinc acetate dehydrate를 전구체로 사용하고 ethanolamine 을 솔 안정화제로 사용하여 간단하고 경제적인 솔-젤 방법을 통하여 Zinc Oixde (ZnO)를 active layer로 사용한 박막 트랜지스터를 제작하였다. ZnO 박막 트랜지스터는 전구체 용액을 기판 위에 스핀 코팅한 후 열처리 과정을 통하여 제작되었고 제작된 ZnO 박막 트랜지스터는 가시광선 영역에서 높은 투과도 (>90%) 를 보였다. 산화 아연 박막 트랜지스터의 특성을 향상 시키기 위하여 전구체 용액의 농도 조절, ZnO 박막의 두께 조절, 열처리 온도의 조절 등과 같은 연구를 수행하였다. 여러 공정 조건의 변화를 통하여 최적화된 ZnO 박막 트랜지스터는 전하 이동도가 9.4 cm^2/Vs, sub-threshold slope이 3.3 V/dec 그리고 on-to-off current ratio가 5.5${\times}$10^5로 디스플레이 소자를 구동하기 충분한 특성을 보였다.

• YAKHAK HOEJI
• /
• v.37 no.1
• /
• pp.66-75
• /
• 1993

Dental abrasive, dicalcium phosphate dehydrate (DCPD) was prepared and the several important factors affecting on the quality of toothpaste were investigated by means of set test, glycerine absorption, Coulter counter test, color difference, BET adsorption, mercury porosimetery, and rheogram comparing with two foreign DCPDs, MFO4 and Dentphos K. Sample DCPD was prepared by reaction between 85% H$_{3}$PO$_{4}$ and 15% milk of lime at $39^{\circ}C$ (pH6.5), and stabilized with TSPP and TMP. The physicochemical properties of Sample DCPD were obtained as follows: whiteness (98.99), average particle size (15.5 $\mu\textrm{m}$), pH (7.9), remainder particle weight (0.49w/w%), glycerine absorption value (64 ml), and set test (passed). N$_{2}$ adsorption curves (BET) of three kinds of DCPD showed non-porous type III isotherm. BET adsorption parameters of sample DCPD showed that surface area was 24.9 m$^{2}$/g, total pore volume 0.09 cm$^{3}$/g and average pore radius 72.0 $\AA$. The rheogram of the toothpaste containing each DCPD showed bulged plastic flow with yield vlaue and thixotropic behavior. These results meet standard requirements as abrasive standard, and suggested that synthesized sample DCPD could be used a dental abrasive such as a high quality grade in practice as foreign DCPDs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.8
• /
• pp.484-490
• /
• 2017

We investigated the rewritable operation of a non-volatile memory device composed of Al (top)/$TiO_2$/indium-zinc-oxide (IZO)/Al (bottom). The oxygen-deficient IZO layer of the device was spin-coated with 0.1 M indium nitrate hydrate and 0.1 M zinc acetate dehydrate as precursor solutions, and the $TiO_2$ layer was fabricated by atomic layer deposition. The oxygen vacancies IZO layer of an active component annealed at $400^{\circ}C$ using thermal annealing and it was proven to be in oxygen vacancies and oxygen binding environments with OH species and heavy metal ions investigated by X-ray photoelectron spectroscopy. The device, which operates at low voltages (less than 3.5 V), exhibits non-volatile memory behavior consistent with resistive-switching properties and an ON/OFF ratio of approximately $3.6{\times}10^3$ at 2.5 V.

• Journal of the Korean Society of Radiology
• /
• v.81 no.5
• /
• pp.1234-1238
• /
• 2020

Calcium pyrophosphate dihydrate (CPPD) crystal deposition disease is characterized by chondrocalcinosis, which mainly affects the knees, wrists, pelvis, and rarely, the spine. According to previous reports, CPPD crystal deposits display heterogeneous enhancement on MRI. When combined with inflammation of the surrounding soft tissue, strong enhancement by CPPD crystal deposition may appear similar to imaging features of other conditions such as infectious spondylitis. In these conditions, CT plays an important role in differential diagnosis. Here, we present a case of CPPD crystal deposition disease in the ligamentum flavum of the cervical spine that showed intense enhancement on MRI.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.3
• /
• pp.285-291
• /
• 2015

A centrifuge works on the principle that particles with different densities will separate at a rate proportional to the centrifugal force during high-speed rotation. Dense particles are quickly precipitated, and particles with relatively smaller densities are precipitated more slowly. A decanter-type centrifuge is used to remove, concentrate, and dehydrate sludge in a water treatment process. This is a core technology for measuring the sludge conveyance efficiency improvement. In this study, a smoothed particle hydro-dynamic analysis was performed for a decanter centrifuge used to convey sludge to evaluate the efficiency improvement. This analysis was applied to both the original centrifugal model and the design change model, which was a ball-plate rail model, to evaluate the sludge transfer efficiency.