• 한국의류학회지
• /
• 제34권7호
• /
• pp.1184-1196
• /
• 2010

Several applications of body scanning technology have been commercialized or are currently under development. The virtual fit from 3D scans is most advanced form of virtual try-on. This article is an analysis of the comparison of user preferences for domestic versus foreign 3D virtual try-on systems. For this study, domestic i-Fashion Mall (www.ifashionmall.co.kr) and a Canadian company, My Virtual Model (www.mvm.com) were selected as the most representative online retailers that offer a virtual try-on system. The respondents were comprised of 70 Korean female college students in the age group 20-29. A five point Likert scale was used to evaluate the degree of the preference of virtual avatar and try-on images. T-test, cross table, and a chi-square independence test were conducted for data analysis. The results are as follow. 1. The representation about current looks according to each virtual fit image indicates that MVM is more accurate than i-Fashion Mall. 2. About decision confidence, respondents have decision confidence in i-Fashion Mall in the case of the avatar image; however, respondents have confidence in MVM or the fit image. 3. There were no significant differences in among waist size groups in accuracy, trust of each avatar image, while there were significant differences among waist size groups in the accuracy and trust of each virtual fit image. 4. About ease of use, respondents answered that i-Fashion Mall is superior to MVM. 5. The respondents prioritized the ‘fitting report’ of i-Fashion Mall and ‘Weight loss’ of MVM over other functionalities.

• The Journal of Advanced Prosthodontics
• /
• 제2권3호
• /
• pp.102-105
• /
• 2010

PURPOSE. The aims of this study were to suggest a method of fabrication of the record base using a light-polymerized resin by applying the two-phase fabrication method for the improvement of the fit of the record base and to compare the degree of fit according to the separation site. MATERIALS AND METHODS. In the edentulous cast of maxilla, four test groups were considered. In the first, second, third, and fourth test groups (n = 12 in each group) the separation was done at 0, 5, 10, and 15 mm, respectively below the alveolar crest along the palatal plane. For the control group, the record base was made without separating the two sections. The light-body silicone material was injected into the fitting surface of the record base. It was then placed onto the cast and finger pressure was applied to stabilize it in a seated position followed by immediate placement onto the universal test device. Finally, the mass of the impression material was measured after it was removed. ANOVA was performed using the SAS program. For the post-hoc test, the Wilcoxon Rank-Sum test and the Tukey-Kramer HSD test were performed ($\alpha$ = 0.05). RESULTS. The control group and Group 3, 4 showed significant differences. The Group 3 and 4 showed significantly smaller inside gaps than the control group which was not made with the two-phase fabrication method. CONCLUSION. The two-stage polymerized technique can improve the fit of the denture base particularly when the separation was made at 10 to 15 mm from the alveolar crest.

• Asia Marketing Journal
• /
• 제14권2호
• /
• pp.23-37
• /
• 2012

Individuals often make their judgments on the basis of the ease or difficulty with which information comes to mind (for reviews, see Greifeneder, Bless, and Pham 2010; Schwarz 1998, 2004). Recent research, however, has documented that variables known to determine the degree of cognitive resources invested in information processing such as personal relevance (Grayson and Schwarz 1999; Rothman and Schwarz 1998), accuracy motivation (Aarts and Dijksterhuis 1999), and processing capacity (Menon and Raghubir 2003) can affect the extent to which individuals draw on metacognitive difficulty in making their judgments. The primary aim of this research is thus to investigate whether individuals with substantial cognitive resources or those with lack of cognitive resources are more likely to draw on metacognitive difficulty when making their product evaluations. The findings from two laboratory experiments indicate that individuals who perceive a greater level of fit between their self-regulatory orientation and temporal construal (Experiment 1), and between their self-construal and the type of product benefit appeal (Experiment 2) are more likely than those who perceive the lack of such fit to evaluate a target product less positively after thinking of many rather than a few positive reasons. The findings provide supporting evidence for the two-stage backward inference process involved with the effect of metacognitive difficulty on consumer judgments in that consumer judgments based on metacognitive difficulty may require greater cognitive resources than those based on the content of information generated. Also, the current research documents further empirical evidence for the relationship between self-regulatory orientation-construal level fit and cognitive resources such that perceived regulatory-construal level fit can increase consumer willingness to invest cognitive resources into their judgment tasks. Last, the findings can help marketers differentiate purchase situations where asking consumers to think of many positive benefits from purchase situations where asking consumers to think of a few key benefits is relatively more beneficial.

• 품질경영학회지
• /
• 제31권2호
• /
• pp.51-68
• /
• 2003

This research addresses familiarity and degree of using Internet site and trust building to affect service quality in e-commerce. We assume that the familiarity and frequency of using Internet site affect perceived service quality of customer. Also it assumes that customer's trust building intermediates their relationships. Several hypotheses are set to test these assumptions empirically. Consequently, the results show that familiarity of using Internet site affects customer's perceived service quality significantly except for tangible. Also it is found that degree of customer's trust building intermediates the relationship between familiarity of using Internet site and customer's perceived service quality significantly. For gaining good trust of customer in Internet site, we suggest that familiarity should fit into customer's needs.

• 대한치과기공학회지
• /
• 제41권2호
• /
• pp.81-86
• /
• 2019

Purpose: The purpose of the present study was to compare the internal fit of two different temporary restorations fabricated by dental CAD/CAM system and to evaluate clinical effectiveness. Methods: Composite resin tooth of the maxillary first molar was prepared as occlusal reduction(2.0mm), axial reduction(1mm offset), vertical angle(6 degree) and chamfer margin for a temporary crown and duplicated epoxy die was fabricated. The epoxy dies were used to fabricate provisional restorations by CAD/CAM milling technique or 3D-printing technique. The inner data from all crowns were superimposed on the master die file in the 'best-fit alignment' method using 3D analysis software. Statistical analysis was performed using a Wilcoxon's rank sum test for differences between groups. Results: It showed that the internal RMS(Root Mean Square) values of the additive group were significantly larger than those of other group. No significant differences in internal discrepancies were observed in the temporary crowns among the 2 groups with different manufacturing method. Conclusion: All the groups had the internal fit within the clinical acceptable range (< $50{\mu}m$). The continuous research in the future to be applied clinically for the adaptation of additive manufacturing technique are needed.

• Asia Marketing Journal
• /
• 제17권4호
• /
• pp.105-123
• /
• 2016

Do corporate social responsibility (CSR) initiatives lead to positive outcomes for companies? Although it is commonly accepted that CSR is a necessary component of modern marketing communication, the empirical evidence shows that that is not always the case. If CSR is sometimes not conducive to better marketing, it behooves firms to determine the right conditions that foster more effective CSR. It is in that vein that this study aims to add to the growing body of marketing and CSR literature through a series of experiments that examines the dynamics between prior attitude toward the company, the fit between the company and the CSR cause, and consumers' accessible thoughts. This study finds that the prior corporate reputation has an impact on how consumers evaluate the CSR activities of companies. Moreover, we show that the degree of accessible thoughts and their valence can change the moderating effect of the fit between the company and the CSR cause. This is because negative information is perceived as being more diagnostic than positive information in an evaluation situation. We demonstrate that companies that have lower prior public reputations can improve the evaluation of their CSR activities in two major ways: (1) by finding CSR causes that have a lower fit with their business, or (2) by providing information that allow consumers to access more positive thoughts about the CSR activity.

• 대한가정학회지
• /
• 제39권12호
• /
• pp.177-188
• /
• 2001

The purpose of this study is to investigate the fitness according to drafting method of the block patterns for women in Korea. The major findings of this study are as follows: 1. According to each sensory test of the frontal view, back view, side view and silhouette Block Pattern I is the best of them in summation of the sensory tests score. Block, Pattern D and I have good shape too. However the best block Pattern D shows good score in evaluation of overall fitness and silhouette. 2. Most of block patterns, which show high scores in sensory tests, are the Compromise Method taking merits of the Proportional Method and Short Measure Method among the Pattern Drafting Methods. Box-shape patterns show low score in the sensory tests. 3. Regarding to the number of measurement, the patterns of the Compromise Method using 6-8 measurements seem to be optimal. In degree of fitness, loose fit type basic patterns are better than other patterns from a viewpoint of the total satisfaction.

• 복식
• /
• 제43권
• /
• pp.83-96
• /
• 1999

The Purpose of this study was to the basic informations about the wearing stagte according to body satisfaction of the middle aged women. For the research method the actual wearing state of the foundation and the degree of body satisfaction were checked by questionaire survey from 350 middle aged women and analyzed 280 sheets. The results were as follows: 1. At the body satisfaction survey the respondent reply lower score about the girth items especially abdominal girth. According to the body shape and age there were meaningful differences. 2. The actual wearing state of the foundation had meaningful differences according to the body shape and age. The most important was about the fit for their bodies. 3. The most important dissatisfaction was about the fit for their bodies. Also there was meaningful differences according to body shape and age. 4. for the result of the feelings of wearing the foundation the feelings of wearing the girdle were more inconvenient than the feelings of wearing the brassiere Also there were meaningful differences according to the body shape and age. older and obeser women feel more inconvenient.

• Restorative Dentistry and Endodontics
• /
• 제7권1호
• /
• pp.101-106
• /
• 1981

The purpose of this study was to estimate the ability of the marginal fit of Glass ionomer cement. Using the human extracted teeth and 2% acqueous solution of methylene blue, the author investigated the marginal penetration of dye in restorative materials such as Amalgam, Hi-Pol, Glass ionomer cement, Estic microfill and Restodent. The results were as follows. 1. All filling materials showed some degree of marginal penetration. 2. Glass ionomer cement revealed nearly the same microleakage as Estic microfill and Hi-Pol, but showed inferior effect of the marginal seal as compared with Restodent. 3. It is appeared that Amalgam has more effective ability of the marginal fit than the others within a week.

• Journal of Electrical Engineering and information Science
• /
• 제1권1호
• /
• pp.129-139
• /
• 1996

The processor allocation problem in mesh multicamputers is to recognize and locate a free submesh that can accommodate a request for a submesh of a specified size. An efficient submesh allocation strategy is required for achieving high performance on mesh multicomputers. In this paper, we propose a new best-fit submesh allocation strategy for mesh multicomputers. The proposed strategy maintains and uses a free submesh list to get global information for free submeshes. For an allocation request the proposed strategy tries to allocate a best-fit submesh which causes the least amount of potential processor fragmentation so as to preserve the large free submeshes as many as possible for later requests. For this purpose, we introduce a novel function for quantifying the degree of potential fragmentation of submeshes. The proposed strategy has the complete submesh recognition capability. Extensive simulation is carried out t compare the proposed strategy with the previous strategies and experimental results indicate that the proposed strategy exhibits the best performance along with about 10% to 30% average improvement over the best previous strategy.