• Journal of Pharmaceutical Investigation
• /
• v.13 no.1
• /
• pp.1-9
• /
• 1983

The effect of humidity on crystallization and polymorphic transformation of hydrous aluminum oxide under various humidity at $37^{\circ}$ was examined by means of X-ray diffraction, scanning electron micrograph, IR spectra and DTA. The humidity was an important factor influencing crystallization of hydrous aluminum oxide. The growth or crystal was strongly accelerated by humidity. The aging process is assumed that it is composed of two seperate steps, an increase of the diffraction around $36{\sim}42^{\circ}$, and an appearance and its development of the peak at $18{\sim}20^{\circ}$ of $2{\theta}$ value. The former is considered to be nucleation and the latter correspond to the growth period on crystallization. The crystalline form of aging products was various depending on the degree of humidity, directly it leads to the eventual formation of bayerite in more than 72%, $b{\"{o}}hmite$ in 50% and resembled to Nordstandite in 0% relative humidity, respectively but once formed, it was mostly stable in each surroundings and does not transform to the other more stable form in solid state even after aging for five years. The mechanism responsible for aging is further polymerization process of six-membered rings by deprotonation-dehydration reaction in which positively charged polynuclear hydroxy aluminum complexes formed in the presence of moisture are joined at their edges by double hydroxide bridges.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.5
• /
• pp.398-403
• /
• 1987

A general theory of polymer adsorption at a semi-permeable oil-water interface of the biphasic solution is presented. The configurational factor of the solution in the presence of the semi-open boundary at the interface is evaluated by the quasicrystalline lattice model. The present theory gives the feature of the bulk concentration equilibria between oil-water subsystems and the surface excesses of ${\Gamma}^{\alpha}$ and ${\Gamma}^\{beta}$ of the polymer segments as a function of the degree of polymerization $\gamma$, the Flory-Huggins parameter in $\beta$-phase $x_{\rho}^{{\beta}_{\rho}}$, the differential adsorption energy parameter in $\beta$-phase $x_{\sigma}^{{\beta}_{\rho}}$, the differential interaction energy parameter ${\Delta}x_{\rho}$ and the bulk concentration of the polymer in ${\beta}-phase ${\varphi}_2^{{\beta(*)}_2}$. From our numerical results, the characteristics of ${\Gamma}^{\alpha}$ are shown to be significantly different from those of ${\Gamma}^{\beta}$ in the case of high polymers, and this would be the most apparent feature of the adsorption behavior of the polymer at a semi-permeable oil-water interface, which is sensitively dependent on ${\Delta}x_{\rho}$ and r.

• Elastomers and Composites
• /
• v.29 no.5
• /
• pp.444-452
• /
• 1994

Emulsion graft copolymerizations of vinyl monomers, butyl acrylate(BA), methyl methacrylate(MMA), 2-ethylhexyl acrylate (EHA), glycidyl methacrylate (GMA), 2-hydroxyethyl methacrylate(HEMA), methacrylonitrile(MAN), dimethylaminoethyl methacrylate(DAMA) or 2-vinyl pyridine(VP), onto carboxyl-terminated SBR latex were carried out under different experimental conditions. In case of synthesizing SBR-g-poly(butyl acrylate), the degree of grafting was increased with increasing the amount of emulsifier, polymerization temperature and the amount of initiator. Pull-out strength of resorcinol-formaldehyde-latex(RFL) adhesives formulated with modified latexes was very higher than that of RFL adhesive formulated with ungrafted latex. When the modified latexes with GMA, HEMA, MAN, DAMA or VP were used, the break occurred at cords. Peel strength of RFL adhesives formulated with SBR-g-poly(GMA), SBR-g-poly(HEMA) or SBR-g-poly(VP) was higher by about 1.3 times than that of RFL adhesives formulated with unmodified SBR against nylon cord and was higher by about 2.0 times against polyester cord.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.3
• /
• pp.55-62
• /
• 2015

Paper mulberry fibers have been used as fibrous raw materials for manufacturing traditional handmade paper, hanji for a long time. Compared to wood pulp fibers, pulp fibers from mulberry bast tissue have some benefits in physical and chemical properties due to their high D.P (degree of polymerization), M.W (molecule weight) and long fiber length. Specially, Korean handmade hanji shows outstanding characteristics in mechanical tensile strength, folding endurance, flexibility and long sustainable conservation properties. Therefore, hanji is widely applied to daily supplies, hygienic goods, medical supplies, clothing industries and so on. Recently, the potential demand of mulberry pulp fibers is more and more increased on the strength of high application fields. This study was focused on the possibility of wastewater recycling in unit operation systems for the development of automated mass production line. The properties and environmental loads of wastewater from debarking, cooking, bleaching and screening process were analyzed by means of COD, conductivity, turbidity and solid materials. The wastewater from debarking and cooking process was comparatively high in pollution load, and would be treated by additional approaches of chemico-physical method.

• Journal of Applied Biological Chemistry
• /
• v.42 no.4
• /
• pp.166-168
• /
• 1999

Inulo-oligosaccharides (IOS, $F_n$, n=2-6) were purified from enzymatic hydrolysates of water-soluble extract of Jerusalem artichoke tubers. Quantification of inulo-oligosaccharides was done using high pH anion exchange chromatography with pulsed amperometric detector (HPAEC-PAD) at the concentration range of 10-100 mg/L, which was compared with that of fructo-oligosaccharides (FOS, $GF_n$, n=1-7). Peak areas per mg IOS were higher than FOS at the same degree of polymerization (DP). Specific peak areas of IOS increased proportionally as DP increased up to six, in contrast to FOS showing no linearity.

• Applied Biological Chemistry
• /
• v.35 no.3
• /
• pp.196-201
• /
• 1992

Characteristics on lintnerization of dry type (Suwon 147) and moist type (Hwangmi) sweet potato starches were investigated. Chain distribution of lintnerized starches was also studied by debranching with pullulanase. Hydrolytic patterns of two starches showed two distinct stages and hydrolysis extents of Suwon 147 starch were lower than those of Hwangmi starch. The relative crystallinities of Suwon 147 starches were higher than those of Hwangmi starch. The elution profiles of lintnerized starches were composed of two peaks about degree of polymerization (DP) 25 and DP 15. The elution profiles of debranched samples showed only one peak about DP 15 and peak DP of Suwon 147 lintnerized starch was higher than that of Hwangmi.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.4
• /
• pp.273-278
• /
• 1998

Carbohydrate metabolism and partitioning are dependent on relationships between sources and sinks which can be affected by rates of photosynthesis and respiration. Fructan, the major form of stored carbohydrate in tall fescue (festuca arundineacea Schreb.), changes in concentration during growth and in response to the environment. Objectives of this study were i) to examine the content and the composition of carbohydrates in five tissues (mature leaf blade, immature leaf blade, leaf elongation zone, terminal meristem, and root tips) of two tall fescue genotypes, one with high yield per tiller (HYT) and one with low yield per tiller (LYT), and ii) to compare the reserved and utilized carbohydrates among above five different tissues, particularly between the leaf elongation zone and root tips. The established vegetative tillers of the HYT and LYT genotypes were grown in a controlled-environment growth chamber. Water-soluble carbohydrate (WSC) in the leaf elongation zone was about 22% of dry weight in the HYT and about 19% in the LYT genotype. The root tip also had high WSC, about 12% of dry weight in the HYT and 6% in the LYT genotype. Hexoses and sucrose were the major components of total WSC in all tissues except the leaf elongation zone. The growing tissues (sinks), i.e., the leaf elongation zone and root tip, had a high proportion of low degree of polymerization fructan, i.e., 3 to 8 hexose units.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.2
• /
• pp.40-48
• /
• 2011

To build up the conservativeness of aged paper heritages, the strength reinforcement treatment using various cellulose derivative solutions was considered. Hand-made Hanji prepared by traditional papermaking technique was firstly simulated in order to modify the overall of paper properties like aged paper heritages by accelerated ageing treatment at $150^{\circ}C$ for 24 hours, and then the ageing stability of Hanji was verified through the secondary accelerated ageing at $150^{\circ}C$ for 12 hours. The physical properties of aged Hanji were improved by applying with cellulose derivative solutions. The ageing stability for physical, optical (L, brightness, opacity, yellowness) and chemical (oxidation index, degree of polymerization) properties of aged Hanji treated with all kinds of cellulose derivative solutions was also good compared to those of untreated samples, especially using MC solution. Therefore, it was that a kind of MC solution would be well-suited for the strength reinforcement treatment of aged paper heritages.

• Textile Coloration and Finishing
• /
• v.3 no.1
• /
• pp.17-24
• /
• 1991

Polyesteramide(PEA) has been synthesized with different molar ratio of 6-aminocaproic acid(ACA) and oligo butylene terephthalate(OBT) prepared from Dimethyl terephthalate(DMT) and 1, 4-butanediol(BD) by the melt polymerization. Oligomer and polymer molecular structure were characterized by IR spectra, H'-NMR spectra. Also the thermal properties were examined by thermogravimetric analysis(TGA) and differential scanning calorimetry(DSC). DSC and TGA results exhibited that the$ T_m$ s were detectable in the vicinity of $170-220^{\circ}C$ and the Ta's were detectable in the vicinity of $380-390^{\circ}C$ . X-ray diffraction analysis results show that the synthesized polyesteramide has high degree of crystallinity.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.3001-3004
• /
• 2014

A series of hydroxyl-derivatized quaternized polymers were successfully synthesized by atom transfer radical polymerization (ATRP) and Cu(I)-catalyzed 1,3-dipolar cycloaddition of azide and alkynes (click chemistry), followed by quaternization reactions. ATRP was employed to synthesize poly(2-hydroxyethyl methacrylate) (PHEMA), followed by introduction of alkyne groups using pentynoic acid, leading to HEMA-Alkyne. 2-Azido-1-ethanol and 3-azido-1-propanol were combined with the HEMA-Alkyne backbone via click reaction, resulting in triazole-ring containing hydroxyl-derivatized polymers. Quaternization reactions with methyl iodide were conducted on the triazole ring of each polymer. Molecular weight, molecular weight distribution, and the degree of quaternization (DQ) were determined by gel permeation chromatography (GPC) and $^1H$ NMR spectroscopy. The average molecular weight ($M_n$) of the resulting polymers ranged from $5.9{\times}10^4$ to $1.05{\times}10^5g/mol$ depending on the molecular architecture. The molecular weight distribution was low ($M_w/M_n$ = 1.26-1.38). The transmission spectra of the 0.1 wt % aqueous solutions of the resulting quaternized polymers at 650 nm were measured as a function of temperature. Results showed that the upper critical solution temperature (UCST) could be finely controlled by the level of DQ.