• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05a
• /
• pp.159-162
• /
• 2005

To overcome the drawbacks of conventional load-control method and displacement-control method, the so-called volume-control method was developed by utilizing a pressure node added into a layered shell element. The pressure node has an increment of pressure as an additional degree of freedom of the shell element. In this study, the hollow RC columns are discretized with multi-layered shell elements and a modeling technique utilizing the volume-control analysis for various hollow RC column structures is introduced. The results of the nonlinear analysis using the modeling for hollow RC columns subjected to lateral reversed cyclic loading as well as lateral loading under compression are shown. Validity of the modeling technique is also verified by comparing the analysis results with experimental results and other analysis data.

• Journal of Communications and Networks
• /
• v.7 no.4
• /
• pp.429-437
• /
• 2005

Sensor localization has become an essential requirement for realistic applications over wireless sensor networks (WSN). In this paper we propose an ad hoc localization algorithm that is infrastructure-free, anchor-free, and computationally efficient with reduced communication. A novel combination of distance and direction estimation technique is introduced to detect and estimate ranges between neighbors. Using this information we construct unidirectional coordinate systems to avoid the reflection ambiguity. We then compute node positions using a transformation matrix [T], which reduces the computational complexity of the localization algorithm while computing positions relative to the fixed coordinate system. Simulation results have shown that at a node degree of 9 we get $90\%$ localization with $20\%$ average localization error without using any error refining schemes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.304-308
• /
• 2006

The focus of this study is modeling technique for a bellows in vehicle exhaust system. Bellows was developed using tile finite element model by replacing with the equivalent beam. The equivalent beam model were studied in detail. Non-structural node in the cross section of original model is given to expressing their motion. Equivalent mass matrix and stiffness matrix calculated using Guyan reduction method. Material Properties of beam was obtained from the direct comparison between equivalent model and that of Timoshenko beam model. The calculated natural frequencies and mode shape are compared with the reference results and coincided well. The results were compared with the confirmed results, which were in good agreement.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.2
• /
• pp.1-14
• /
• 1991

A computer program for the linear elastic buckling anlalysis of thin walled members is developed using a 3-node triangular shell element. The element has real stiffness value for a kinematic degree of freedom associated with rotation about the surface normal at each node. The validity of the present computer program is demonstrated through the plate buckling analysis and the lateral-torsional buckling analysis of a straight beam. Then, simply supported circular arches subjected to uniform bending are analyzed and the results are compared with existing solutions.

• Structural Engineering and Mechanics
• /
• v.25 no.4
• /
• pp.405-421
• /
• 2007

A four-node hybrid stress element for analysing orthotropic folded plate structures is presented. The formulation is based on Hellinger-Reissner variational principle. The element is developed by combining a hybrid plane stress element and a hybrid plate element. The proposed element has six degree of freedom per node and permits an easy connection to other type of elements. An equilibrated stress field in each element and inter element compatible boundary displacement field are assumed independently. Static and free vibration analyses of folded plates are carried out on numerical examples to show that the validity and efficiency of the present element.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1725-1727
• /
• 2015

In this letter, a QR decomposition based sequential BP detection scheme is proposed for MIMO systems. The proposed scheme performs the sequential updates from the observation node having the smallest degree among all the observation nodes. Our simulation results verify that the proposed scheme achieves an improved error performance with a significantly accelerated detection convergence speed compared to the conventional schemes.

• ETRI Journal
• /
• v.42 no.3
• /
• pp.341-350
• /
• 2020

In a wireless sensor network (WSN), the data transmission technique based on the cooperative multiple-input multiple-output (CMIMO) scheme reduces the energy consumption of sensor nodes quite effectively by utilizing the space-time block coding scheme. However, in networks with high node density, the scheme is ineffective due to the high degree of correlated data. Therefore, to enhance the energy efficiency in high node density WSNs, we implemented the distributed source coding (DSC) with the virtual multiple-input multiple-output (MIMO) data transmission technique in the WSNs. The DSC-MIMO first compresses redundant source data using the DSC and then sends it to a virtual MIMO link. The results reveal that, in the DSC-MIMO scheme, energy consumption is lower than that in the CMIMO technique; it is also lower in the DSC single-input single-output (SISO) scheme, compared to that in the SISO technique at various code rates, compression rates, and training overhead factors. The results also indicate that the energy consumption per bit is directly proportional to the velocity and training overhead factor in all the energy saving schemes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.5
• /
• pp.589-595
• /
• 2019

Recently, the mobile social networks, which consider both social relationship between users and mobile communication networks, have been received great attention. In this paper, we consider the trust degree of node as the social relationship for the cooperative communication networks. In contrast to the existing works that consider the case of the perfect trust degree information, for the case that transmitter has an imperfect trust degree information, we propose an imperfect trust degree based cooperative communication technique that maximizes a throughput. We first model the imperfect trust degree information as a probability distribution and derive the outage probability using the probability distribution. Then, we propose the transmission scheme that maximizes the throughput, which consider both outage probability and transmission rate. The simulation results show that the proposed cooperative transmission scheme outperforms the conventional scheme in terms of the throughput.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.5
• /
• pp.1-13
• /
• 2007

In this research, we found out that bridging nodes have great effect on the robustness of protein-protein interaction networks. Until now, many researchers have focused on node's degree as node's essentiality. Hub nodes in the scale-free network are very essential in the network robustness. Some researchers have tried to relate node's essentiality with node's betweenness centrality. These approaches with betweenness centrality are reasonable but there is a positive relation between node's degree and betweenness centrality value. So, there are no differences between two approaches. We first define a bridging node as the node with low connectivity and high betweenness value, we then verify that such a bridging node is a primary factor in the network robustness. For a biological network database from Internet, we demonstrate that the removal of bridging nodes defragment an entire network severally and the importance of the bridging nodes in the network robustness.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.6
• /
• pp.3877-3880
• /
• 2013

Objective: To explore the expression and significance of tumor specific growth factor (TSGF), carcinoembryonic antigen (CEA) and alpha fetoprotein (AFP) in cancer tissue and serum of patients with colon cancer. Materials and Methods: Radical surgery for colon cancer was performed on 43 patients with laparoscopu under conditions of general anesthesia. The Elisa method was used to detect the levels of serum TSGF, CEA and AFP before and after radical operation, and cancer tissue underwent TSGF, CEA and AFP immunohistochemistry staining after laparoscopic surgery. The decreased conditions of serum TSGF, CEA and AFP in patients with colon cancer at different levels of differentiation and clinical stagings were analyzed, and the relationships of expression rates between histological types, colon cancer morphology, lymph node metastasis and TSGF, CEA as well as AFP in cancer tissue were assessed. Results: Compared with before radical surgery, the levels of serum TSGF, CEA and AFP decreased notably in patients after operations (p<0.01). The decreased degree of TSGF and CEA was the largest in patients with poorly differentiated cancer tissue (p<0.01), while that of AFP was noted in patients with moderately differentiated cancer tissue (p<0.01). The decreased degree of TSGF and AFP was the largest in patients at phase Dukes A (p<0.01), while that of CEA in patients at phase Dukes C (p<0.01). There were no significant differences among the positive expression rates of TSGF, CEA and AFP with different histological types and colon cancer morphologies (p>0.05). The positive expression rates of TSGF and CEA in patients with lymph node metastasis were significantly higher than those without lymph node metastasis (p<0.01). Conclusions: TSGF, CEA and AFP can be used to evaluate the effect of radical operation for colon cancer, and the changed levels of different markers are associated with tumor differentiation, clinical stating and presence or absence of lymph node metastasis.