• 한국초등과학교육학회지:초등과학교육
• /
• 제22권2호
• /
• pp.149-155
• /
• 2003

The objective of this research was to study the impact of metacognitive lesson models on the formation of magnetic field concepts. The subjects of this research was eighty students from two sixth grade classes. One class of forty of these students was the experimental group, which the metacognitive strategic lesson model was applied, and the other class of forty students was the control group which the traditional lessons were conducted. As the result of the experiment, the experimental group and the control group, which previously did not show difference in terms of achievement of conceptualizing magnetic field, displayed a significant difference. According to the comparison between the pre-experiment test on the students' previous concepts and the achievement of the students after the experiment, the middle group showed difference between the experimental group and the control group in a small degree. The lower group showed a notable difference between the two groups and the higher group showed no difference. In terms of achievements shown in different questions asked, there was little difference in the questions that were stated in the textbook while there was a significant difference in the questions that applied the contents of the textbook. The higher academic group, according to the test on the previous concepts, did not show much difference between the experimental group and the control group when they were asked about the concepts of the textbook. In terms of the comparison in the metacognitive levels, both the higher and lower metacognitive experimental groups' average grade was higher than the control groups' and showed an important statistical difference.

• Smart Structures and Systems
• /
• 제16권2호
• /
• pp.295-328
• /
• 2015

In recent years the monitoring of structural behavior through acquisition of vibrational data has become common practice. In addition, recent advances in sensor development have made the collection of diverse dynamic information feasible. Other than the commonly collected acceleration information, Global Position System (GPS) receivers and non-contact, optical techniques have also allowed for the synchronous collection of highly accurate displacement data. The fusion of this heterogeneous information is crucial for the successful monitoring and control of structural systems especially when aiming at real-time estimation. This task is not a straightforward one as measurements are inevitably corrupted with some percentage of noise, often leading to imprecise estimation. Quite commonly, the presence of noise in acceleration signals results in drifting estimates of displacement states, as a result of numerical integration. In this study, a new approach based on a time domain identification method, namely the Unscented Kalman Filter (UKF), is proposed for correcting the "drift effect" in displacement or rotation estimates in an online manner, i.e., on the fly as data is attained. The method relies on the introduction of artificial white noise (WN) observations into the filter equations, which is shown to achieve an online correction of the drift issue, thus yielding highly accurate motion data. The proposed approach is demonstrated for two cases; firstly, the illustrative example of a single degree of freedom linear oscillator is examined, where availability of acceleration measurements is exclusively assumed. Secondly, a field inspired implementation is presented for the torsional identification of a tall tower structure, where acceleration measurements are obtained at a high sampling rate and non-collocated GPS displacement measurements are assumed available at a lower sampling rate. A multi-rate Kalman Filter is incorporated into the analysis in order to successfully fuse data sampled at different rates.

• 한국지역사회생활과학회지
• /
• 제17권2호
• /
• pp.3-14
• /
• 2006

This study intends to offer suggestions for improving the security and competitive power of traditional liquors by investing in the status of intellectual property rights. Merchandising and the marketing strategies of traditional liquor are also addressed. The data was collected through a questionnaire survey given to 101 CEOs of traditional liquor manufacturers. The major results of this study were as follows: The management types of traditional liquor manufacturers were classified as the company 57 (56.4%), the corporation or the union 29 (28.7%), domestic industry 10 (9.9%), and marketing community or technology center 5 (5.0%). The competitive power degree of traditional liquor products was classified as strength 30 (31.6%), usual 30 (31.6%), weakness 35 (36.8%). The elements of strong competitive power were taste, functional (wellbeing) character, and attractiveness of the brand name. On the other side, reasons for weakness in competitive power were the marketing system, price competitiveness, and advertisement. The trademark registration of the traditional liquor appeared with 53%. The reasons not to pursue a trademark registration included the complicated and unnecessary process of registration acquisition, high registration expenses, etc. The perceptions of CEOs about the consumer's brand awareness for their product were low with an average 2.97. Explanations included insufficient advertisement and public relations, unrefined trademark design, and the meaninglessness of brand names. The marketing strategy of traditional liquor manufacturers according to annual sales were as follows: Manufacturers with high sales emphasized marketing strategies that focused on functional character, traditional image, high quality in image and package materials and design, high price strategies based on quality, and various sale promotions.

• Imaging Science in Dentistry
• /
• 제52권1호
• /
• pp.43-51
• /
• 2022

Purpose: The aim of this study was to evaluate the reliability of the Vectra M3 (3D Imaging System; Canfield Scientific, Parsippany, NJ, USA) in detecting chin asymmetry, and to assess whether the automatic markerless tracking function is reliable compared to manually plotting landmarks. Materials and Methods: Twenty subjects (18 females and 2 males) with a mean age of 42.5±10.5 years were included. Three-dimensional image acquisition was carried out on all subjects with simulated chin deviation in 4 stages (1-4 mm). The images were analyzed by 2 independent observers through manually plotting landmarks and by Vectra software auto-tracking mode. Repeated-measures analysis of variance and the Tukey post-hoc test were performed to evaluate the differences in mean measurements between the 2 operators and the software for measuring chin deviation in 4 stages. The intraclass correlation coefficient (ICC) was calculated to estimate the intra- and inter-examiner reliability. Results: No significant difference was found between the accuracy of manually plotting landmarks between observers 1 and 2 and the auto-tracking mode (P=0.783 and P=0.999, respectively). The mean difference in detecting the degree of deviation according to the stage was <0.5 mm for all landmarks. Conclusion: The auto-tracking mode could be considered as reliable as manually plotted landmarks in detecting small chin deviations with the Vectra^® M3. The effect on the soft tissue when constructing a known dental movement yielded a small overestimation of the soft tissue movement compared to the dental movement (mean value<0.5 mm), which can be considered clinically non-significant.

• 대한의용생체공학회:의공학회지
• /
• 제38권4호
• /
• pp.168-174
• /
• 2017

To improve and downsize the KIOM-Pulse Analysis System(KIOM-PAS), which has been traditionally used in clinical trials, a miniaturized PAS(M-PAS) with a pneumatic pump has been developed. M-PAS is composed of a measurement module and an arm-mounting module, on which an arm can be placed. The measurement module is equipped with a pressing component and sensor, which is a wearable wristband. The arm-mounting module includes a pneumatic motor, data acquisition board and valves. In addition, the measurement module is divided into a fixing module of band type for attachment to a pulsation site and a sensing module, which includes a sensor and a tube. The fixing module and sensing module are constructed independently, and the detachable fastening method improves the posture convenience of the subject during measurement. M-PAS has been reduced to 1/6 the size of KIOM-PAS, and the measurement time is shortened by 22%. Using a simulator, the difference between the waveforms measured by the two devices exhibited a high degree of similarity of within 3.65%. M-PAS represents improvements in size and convenience compared with KIOM-PAS, and it is expected to be widely used in clinics in the future because it improves the attachment method of the fixing module.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.509-516
• /
• 2004

The measurement of abnormal change of temperature(temperature anomaly) will help determine the safety of various engineering constructions, as the measurement in body often used to diagnose one's health. Temperature anomaly can be occurred in leakage or seepage of water flow in rocks, and in ground water table etc. Grouting materials injected in fractured rocks generate heat during hardening process. The degree of temperature change is associated directly with heat flow characteristics, that is, thermal conductivity, specific heat capacity. density of the surrounding rocks and can afford to assess the grouting efficiency. However, in practice, the use of traditional temperature measuring technique composed of only one single thermal sensor has been fundamentally limited to acquire thermal data sufficient to use for that, partly due to the time-consuming measuring work, partly due to the non-consecutive quality of data. Thus, in this paper, a new concept of temperature measuring technique, what we call, thermal line sensor technique is introduced. In this, the sensors with an accuracy of $0.02^{\circ}$ are inserted at regular intervals in one line cable and addressed by a control device, which enables to fundamentally enhance the capability of data acquisition in time and space. This new technology has been demonstrated on diverse field model experiments. The results were simply meant to be illustrative of a potential to be used for various kinds of temperature measurements encountered in grouting and leakage problems.

• 영어어문교육
• /
• 제1호
• /
• pp.129-157
• /
• 1995

I made a careful study of affective variables in foreign language learning Affective variables have not been adequately investigated in the study of second language acquisition. Egoism and inhibition are two egocentric factors which play important roles in foreign language learning. Three sociocultural variables. cultural factors, introversion / extroversion, and aggression may be keys to understanding the social nature of second language learning. And the emerging of cognition and affect in "cognitive styles", which vary within and among individuals, might account for varying degree of success in learning a second language. In the process of learning English. the students new to foreign language come to face the language barrier. though they express the deep interest and feel excited at the beginning stage. Of course, the several reasons can explain this fact. but more specially they can be explained in terms of such personal affective factors as age, aptitude, personality, and first of all, motivation. Also the socicultural factors between language and culture can be considered to the learner's aptitude toward the language. Affective factors of students are involved in personality. and personality and affective factors affect English learning. Affective variables of students affect the will to take part in English learning, and the rate of participation in English learning affect the fluency. If students feel inconvenience in English class, it is rarely that they run a risk. Students who do not run a risk in English class are short of spontaneous participation Consequently, it may have negative influence on the accuracy and the fluency of English. Therefore, teachers must be more influential in motivating students and specially attentive so that the students may not make the negative and inhibitive language learning attitude.

• 콘크리트학회지
• /
• 제11권1호
• /
• pp.119-127
• /
• 1999

본 연구는 시멘트를 기초로 하는 준 취성재료를 2개 결합시킨 복합구조체의 파괴거동을 시뮬레이션 하는 데 그 목적이 있다. 이를 위해 작용하중방향에 직각으로 콘크리트와 시멘트를 적층하여 시편을 제작하였고, 비선형파괴해석에서 사용되는 각 구성재료별 파괴계수들을 구하기 위해 콘크리트와 시멘트 각각에 대해 3점휨시험 및 간접인장강도시험을 실시하였다. 시험을 통해 산정한 계수들을 도출한 이론식에 적용하여 복합체로 제작한 시편의 실험 결과치와 비교한 결과, 가상균열이론에 입각한 이론치와 실험결과치는 거의 유사한 경향을 나타내었다. 또한, 파괴에너지와 강도의 향상은 복합체를 구성하는 구성재료의 적층순서에 크게 의존하는 것으로 나타났다. 따라서 구조물의 목적에 맞게 복합체를 적절히 배열하므로써 구조물의 취성과 연성을 상승시킬 수 있음을 본 연구를 통해 알 수 있었다.

• 한국심리학회지 : 문화 및 사회문제
• /
• 제26권3호
• /
• pp.329-349
• /
• 2020

본 연구는 형사사법판단 분야에서 광범위하게 판단 오류를 발생시키는 확증편향이 고의성 판단에 어떠한 영향을 미치는지 확인하기 위해 수행되었다. 이를 위해, 사건 가해자 및 피해자의 도덕적 특성을 다르게 조합한 중상해 사건과 사망 사건에서 확증편향이 고의성 판단에 영향을 미치는 심리적 기제를 확인하였다. 연구 결과, 참가자들은 사건 가해자와 피해자 모두 나쁜 사람들이 연루된 사건을 더 전형적인 범죄사건이라고 지각했고, 이러한 전형적인 범죄사건의 가해자에게 더 높은 고의성을 부여하였다. 특히, 확증편향이 높은 사람들은 더욱 범죄사건에 대한 고정관념과 일관된 방향으로 사건 가해자의 고의성을 높게 판단하는 것으로 나타났다. 그런데, 심각한 범죄사건에서는 이러한 확증편향의 조절효과가 사라지고 범죄의 전형성 효과만 나타나는 경향이 있었다. 마지막으로, 본 연구의 의의와 함께 고의성 판단을 왜곡시키는 편향을 감소시킬 수 있는 방안에 대해 논의하였다.

• 한국정보통신학회논문지
• /
• 제21권9호
• /
• pp.1818-1825
• /
• 2017

ADCP(Acoustic Doppler Current Profiler) 는 초음파의 도플러 효과를 이용하여 수중에서 유속의 측정 및 교란 정도를 분석한다. 따라서 수신되는 각 공간 영역에 대한 속도 정보를 추출하기 위하여 수신 펄스 신호에 대한 자기 상관 함수나 FFT(Fast Fourier Transform) 스펙트럼을 추정한다. 그러나 자기 상관 함수 추정은 수신되는 반사 신호가 가우시안 형태의 대칭적인 도플러 스펙트럼을 가진다는 가정이 필요하며 이러한 조건이 만족 되지 않는 경우 추정치에서의 큰 편향오차가 발생할 수 있다. 또한 유속의 변화가 빠르게 나타나는 경우 신호 획득시간이 짧아 유속을 측정하기 위한 자기 상관 함수 나 FFT 스펙트럼의 정확한 추정이 어렵다. 따라서 본 논문에서는 반사 신호가 대칭형 또는 비대칭형 가우시안 형태의 스펙트럼을 보이면서 상대적으로 짧은 반사 획득 신호인 경우에도 정확한 유속 추정이 가능한 AR(Autoregressive) 스펙트럼 첨두치 추정 방법을 제안하였다. 이러한 방법을 이용하면 기존 방법에 비하여 그 정확도를 개선할 수 있음을 보였다. 제안된 방법의 평가를 위하여 다양한 환경에서의 모의 신호들을 구현하였으며 그 결과들을 비교하고 분석하였다.