• 한국산학기술학회논문지
• /
• 제22권5호
• /
• pp.188-198
• /
• 2021

본 연구는 장애인복지기관 종사자들 최신기술에 관심도와 최신기술 저항도 및 불안도 간의 관계에서 최신기술 수용도의 매개효과를 검증하는 것을 목적으로 한다. 이러한 목적 달성을 위하여 2018년 7월부터 8월까지 P광역시 장애인복지관 종사자를 대상으로 자료를 수집하여, 187명의 자료를 분석하였다. 분석은 변수간 인과관계 검정을 위해 다중회귀분석을 실시하였고, 매개효과 검증을 위해 Baron과 Kenny(1986)의 단계별 분석 모형을 활용하였으며 매개효과의 유의도 검증을 위해 Sobel test를 실시하였다. 분석결과 최신기술 관심도는 최신기술 수용도를 매개로 최신기술 저항도 및 불안도에 영향을 미침과 동시에 직접적으로는 영향을 미치지 않아 완전매개효과가 있는 것으로 검증되었으며 Sobel test 결과, 통계적으로도 매개효과는 유의미한 것으로 나타났다. 즉, 장애인복지기관 종사자의 최신기술 관심도는 최신기술 수용도를 매개로 저항도 및 불안도를 낮추어 미래사회 적응 가능성을 높이는 것으로 나타났다. 이러한 결과를 바탕으로 최신기술 저항도 및 불안도를 감소시키기 위한 방안을 모색하고, 최신기술 기술에 대한 관심과 최신기술 수용도를 높일 수 있는 관련 방안을 제언하였다.

• 대한치과기공학회지
• /
• 제15권1호
• /
• pp.27-41
• /
• 1993

Degree of noise by personal dental laboratory working process and degree of noise by complex dental laboratory working process were measured separtely. The time of exposure to noise greater than 70dB was analyzed. Then, the whole degree of noise in dental laboratory was estimated on the basis of afore-mentioned information. Questionaire were employed to investigate the mental, emotional and physiological effects of noise in dental technicians, The purpose of this study was to provide basic information on keeping dental techneicans who are exposed to noise pollution in good working condition and good health. Results obtained are as follows ; 1. Polishing process in each working part showed high degree of noise greater than 70dB in terms of degree of noise by personal working. 2. Degree of noise by complex working process in each working part was greater than that of personal working process. 3. Time of exposure to noise complex working process the part of porcelain 150min, partial denture 120 min, crown and bridge 100 min, full denture 80 min. 4. Degree of noise by time in dental laboratory was 80dB in general for polishing process and below 75dB for waxing process. 5. Effects of noise on mental and emotional state of dental technicians showed that they felt irritated every day(14%), irritated once in a while(29%) and easily ger mad(19%). 6. Effects of noise on heart and stomach were hyper-gastric acid(38%), gastric ulcer(11%), gastritis(5%), deuodenal ulcer(3%) and weak heart function(32%). 7. Effects of noise in the hearing ability were weak(39%), moderate(33%) and normal(14%) Data presented in this study demonstrated that noise in the dental laboratory exerts profound effect on dental technicians mentally, physiologically and emotionally, in light of the above results, therefore, it appears advisable to devots substantial on the management of working condition and put further(continuing) efforts in the investigation for reducing noise problem.

• Restorative Dentistry and Endodontics
• /
• 제21권2호
• /
• pp.559-568
• /
• 1996

The purpose of this study was to evaluate the micro leakage of composite resin when various phosphoric acid agents were used to etch the enamel and dentin. In this study, class V cavities were prepared on the buccal surfaces of fourty extracted human molar teeth, and they were randomly assigned into 4 groups with 10 teeth. The cavities of each groups were etched with 10%, 32%, 35% and 37% phosphoric acids for 15 seconds, washed and dried and the cavities were restored with composite resin after application of the adhesive. The specimens were immersed in 2% methylene blue solution for 3 days. And then, the specimens were sectioned buccoligually. Degree of dye penetration at tooth-restoration interfaces was examined by Inverted Metallurgical Microscope at the occlusal and gingival margins. The result were as follows : 1. The degree of microleakage at occlusal and gingival margin in all group was statistically difference among 10% and 35% (P<0.01), 10% and 37% (P<0.01), 32% and 35% (P<0.05) and 32% and 37% (P<0.05) acid concentrations, but was not statistically difference between 10% and 32%, 35% and 37% acid concentrations (P>0.05). The degree of microleakage was showed to dimish with increase of acid concentration. 2. The degree of microleakage at the occlusal margin was statistically significant difference among 10% and 32%,10% and 35%, 10% and 37% acid concentrations(P<0.05). The degree of microleakage among 32% and 35%, 32% and 37% and 32% and 37% acid concentrations was not statistically significant difference. 3. In comparison of microleakage at the gingival margin, the degree of microleakage above 32% acid concentration was not showed less than 10% acid concentration (P>0.05). In comparison of 32%, 35%, 37% acid concentrations, the degree of microleakage at 35% and 37% acid concentrations was showed less than 32% acid concentration(P<0.05).

• 대한수학교육학회지:학교수학
• /
• 제17권3호
• /
• pp.447-467
• /
• 2015

본 연구의 목적은 도(degree)와 라디안을 호의 측도로 해석하는 것이 라디안과 각의 측정에 대한 개념적 이해에 어떠한 영향을 미치는지 살펴보는 것이다. 이에 호의 길이를 이용한 각의 측도에 대한 내용지식을 26명의 예비중등교사를 대상으로 조사하였으며, 그 결과를 반영하여 두 명의 중학생들을 대상으로 실험을 진행하였다. 예비교사들과 두 중학생의 반응을 분석한 결과, 도(degree)의 개념을 호의 측도로 해석한 경험이 라디안의 이해에 긍정적인 영향을 미쳤으며, 호의 측도로 각의 측도를 파악하는 과정이 '선형 측정'에 대한 개념적 이해를 가능하게 하였다. 또한 각에 관한 다양한 문제에서 원의 맥락과 호의 등분 전략이 효과적인 문제해결전략으로 작용하였으며, 각과 호의 측도 사이의 관계를 탐구할 수 있는 직접적인 조작활동을 제공하는 것이 각의 측정 개념에 대한 이해에 도움을 줄 수 있다는 것을 확인하였다.

• 패션비즈니스
• /
• 제16권1호
• /
• pp.16-25
• /
• 2012

As the test results for surface color, dyeing durability, antibiosis of cotton fabrics and silk fabrics dyed with Agastache rugosa extract, the following conclusions were obtained. The surface color of all the dyed fabrics was confirmed mostly as a GY system. As the result of chrominance(${\Delta}E_{ab}$) measurement, in the case of cotton fabrics the dyed fabrics treated with $Al_2(SO_4)_3$ mordant showed the highest value and in the case of silk fabrics the non-mordant dyed fabrics showed the highest value. The dyeing durability of test fabrics dyed with Agastache rugosa extract are as follows. As the test results of colorfastness to laundry for cotton dyed fabrics, the discoloration degree showed 1st-2nd grade and the contamination degree showed 4th-5th grade. As the test result of colorfastness to dry cleaning for silk dyed fabrics, the contamination degree showed from 1st to 3rd-4th grade. As the test results of colorfastness to acid artificial perspiration, the discoloration degree showed from 1st to 3rd-4th grade and the contamination degree showed from 3rd to 4th-5th grade. As the test results of colorfastness to alkaline artificial perspiration, the discoloration degree showed from 1st to 4th grade and the contamination degree showed from 3rd to 4th-5th grade. The colorfastness to sunlight showed from 1st to 2nd grade. The colorfastness to rubbing showed from 3rd to 4th-5th grade in dry process and from 2nd-3rd to 4th-5th grade in wet process. As the test results of antibiosis, the decrease rate of germs to virus Klebsiella pneumoniae and Staphylococcus aureus showed at least more than 99% after the wash of 10 times. As the test results of antifungal activity to mycete Trichophyton mentagrophytes and Aspergillus niger, the both cotton and silk dyed fabrics didn't gain the significant antifungal effect.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.508-511
• /
• 2004

This study focused on the effect of autonomic microcapsules on the mechanical properties of structural material. Several types of microcapsules with healing agents were manufactured by varying agitation speed of high speed stirrer. The size distribution of microcapsules was measured by a particle size analzer. The epoxy specimens embedded with microcapsules were manufactured and the degree of cure of such epoxy specimen was measured by a differential scanning calorimetry. The tensile modulus and tensile strength in epoxy specimens embedded with microcapsules were evaluated in order to investigate the effects of microcapsules on mechanical properties of structural materials. The configuration of microcapsules and morphology of fracture surfaces for the epoxy specimen were examined by an optical microcope and a scanning electron microscope. According to the results, tensile strength of the epoxy specimen embedded with microcapsules was indicated a little reduction, but tensile modulus was not much affected on microcapsules.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.14-21
• /
• 1995

General Mechanical Structures have various and complex vibration transmission paths. In order to identify the mechanism of vibration transmission. The correct estimation of exciation forces and the exact modeling of transmission paths are required. In this paper, vector synthesis technique is employed to identify the characteristics of vibration input and it's transmission to body structure for the mounting system of a compressor in a refrigerator. Vibration reduction efficiency of each transmission path is evaluated by comparing individual vector components obtained before and after the paths from experimental research. The degree of effect is used to estimate the contribution of vibration input components to total output. And this paper presents a new technique based on simulation studies using vector synthesis dragram, by which the effects of change of the magnitude and phase of transmission paths can be predicted.

• 한국컴퓨터정보학회논문지
• /
• 제20권12호
• /
• pp.107-113
• /
• 2015

This study analyzed the effect of the factors of introducing information technology(organizational and environmental characteristics) on non-financial performance. As detailed variables of each characteristic, the technical support/task force, users' IT capability, and education/training were used for the organizational characteristics while the degree of competition, external pressure, and uncertainty of environment were used for the environmental characteristics. In the results of the analysis, such factors like technical support/task force, users' IT capability, and education/training of the organizational characteristics had significant influence on non-financial performance. Also, factors such as degree of competition, external pressure, and uncertainty of environment of the environmental characteristics had significant influence on non-financial performance.

• 한국농공학회지
• /
• 제34권E호
• /
• pp.1-11
• /
• 1992

Increasing national concern on nonpoint source pollution of surface and ground water Systems has led researchers and policy makers to develop certain agricultural Best Management Practices. As an initial step of broad study program above mentioned, this study reflected the effects of different tillage practice on bulk density and degree of saturation on two regional soils, namely Tama silt loam and Catlin silt loam. Results may help to clarify some of the conflicting findings on the impact of tillage systems on these parameters and it may also explain some of the reasons for specific role that different tillage systems play regarding nonpoint source pollution from agricultural fields.

• 간호행정학회지
• /
• 제19권5호
• /
• pp.555-564
• /
• 2013

Purpose: The purpose of this study was to examine nurses' experience of workplace incivility from coworkers, supervisors, patients or patients' families, and doctors. The researcher identified the relationships among empowerment, burnout, and organizational commitment of hospital nurses. Methods: The sample included 415 hospital nurses. Data were collected through questionnaires and analyzed using SPSS and AMOS. Results: The average incivility score was 2.94 from doctors and 2.89 from patients or patients' families, higher than from supervisors (1.90) and coworkers (1.87). The variables affecting burnout included direct effect of empowerment (${\beta}$=-.46, p<.001), direct effect of patients or patients' family incivility (${\beta}$=.14, p<.001), direct effect of supervisor incivility (${\beta}$=.12, p<.001), and direct effect of doctor incivility (${\beta}$=.09, p<.001). The variables affecting organizational commitment were direct effect of burnout (${\beta}$=-.58, p<.001), indirect effect of empowerment (${\beta}$=-.23, p<.001), indirect effect of patients or patients' family incivility (${\beta}$=-.12, p<.001), indirect effect of supervisor incivility (${\beta}$=-.10, p<.001), and indirect effect of doctor incivility (${\beta}$=-.09, p<.001). Conclusion: The results indicate that incivility affecting nurses results in a high degree of burnout and a low degree of organizational commitment. Therefore, it is necessary to assess incivility cases and to hold workshops designed to curb incivility and establish healthy workplaces.