• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 추계학술발표논문집
• /
• pp.21-33
• /
• 2007

CPAM has been applied to the paper industry for the purpose of wet-end improvement for a long time. And molecular weight and charge density have been managed most important quality factors to make CPAM for this application. Recently branched CPAM was developed to improve retention and drainage characteristics and we considered branch degree of CPAM as important factor as molecular weight and charge density. In this experiment, we tried to investigate physical and chemical properties to determine branch degree and flocculation efficiency using Arbocell pulp which was recently developed micro size pulp and finally we applied retention and drainage test under the ONP stock condition.

• 동력기계공학회지
• /
• 제4권1호
• /
• pp.68-73
• /
• 2000

A mixed degree finite element solutions using hierarchical elements are investigated for convergences on a 2-D simple cases. Elements are generated block by block and each block is assigned an arbitrary solution degree. The numerical study showed that a well constructed blocks can increase the convergence and accuracy of finite element solutions. Also, it has been found that for higher order elements, the convergence trends can be deteriorated for smaller mesh sizes. A procedure for a variable fixed boundary condition has been included.

• 대한수학회보
• /
• 제46권1호
• /
• pp.183-198
• /
• 2009

In this paper, we derive a characterization of orthonormal balanced multiwavelets of order p in terms of the continuous moments of the multiscaling function $\phi$. As a result, the continuous moments satisfy the discrete polynomial preserving properties of order p (or degree p - 1) for orthonormal balanced multiwavelets. We derive polynomial reproduction formula of degree p - 1 in terms of continuous moments for orthonormal balanced multiwavelets of order p. Balancing of order p implies that the series of scaling functions with the discrete-time monomials as expansion coefficients is a polynomial of degree p - 1. We derive an algorithm for computing the polynomial of degree p - 1.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2004년도 International Conference Current Challenges and Advances in Environmental Health
• /
• pp.12-14
• /
• 2004

Objective to know about pollution of ventilated system in super market and hotel's air condition in Kunming. Methods to take out 28 ventilated system from super markets and hotels in Kunming in march 2004. To check dirt amount in pipelines and microorganism in dirt. Testing result is appraised under 'Public hygiene standard of ventilated system in air condition'. Results pollution problem exist in different degree in all the super markets and hotels that have been investigated. There is 32.14% which means 8 hotels and 1 super market, pollution is serious, The others (67.86%) is medium. Conclusion pollution problems exist in air condition system in all super markets and hotels of Kunming. Discussion aim at Kunming's special weather, and present condition of public ventilated system, discussing ways of management in hygiene of air condition system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1506-1512
• /
• 2010

산악지형이 많은 지역에서의 고속철도 건설에는 노선의 선형상의 이유로 터널구간이 많이 존재하며, 터널 건설로 발생하는 암버럭을 유용하기 위하여 노반 건설은 주로 암과 흙의 혼합성토로 이루어지고 있다. 본 연구에서는 이암을 주암으로 하는 혼합토로 이루어진 고속철도 노반의 열차반복하중에 의한 침하특성을 분석하기 위하여 모형토조 실험을 수행하였다. 특히 강우 또는 지하수위 상승에 의한 노반의 포화도 증가가 열차 반복하중 작용 시 노반의 침하특성에 미치는 영향을 분석하기 위하여 초기 포화도 조건을 변화시키면서 실험을 수행하였다. 실험결과, 낮은 포화도 조건에서는 열차반복횟수가 증가할수록 침하가 어느 일정 값에 수렴하는 결과를 나타냈으나, 일정 수준 이상의 포화도 조건에서는 침하가 급격히 증가하는 것을 알 수 있었다. 따라서 노반의 포화도를 일정수준 이하로 관리하는 것이 침하 예방에 중요한 요소임을 확인 할 수 있었다.

• 한국염색가공학회지
• /
• 제16권1호
• /
• pp.34-39
• /
• 2004

Dyeing properties of Glycyrrhizae Radix was investigated with silk fabrics. Dyeing water is a type of chalcone, it showed yellow in IR spectrum. K/S value showed high in following conditions; Glycyrrhizae Radix $200g/1\ell4 water, $80^{\circ}$ of dyeing temperature, 90 minute of dyeing time. Glycyrrhizae Radix dyeing water has higher K/S value in alkalinity(pH9) than in neutrality(pH7) or acidity(pH3) conditions. K/S value showed highest in pH5 premordant method of alkalinity dyeing water condition. The color of silk fabric dyed with Glycyrrhizae Radix is yellow. The change of color did not show by mordant treatment. K/S value showed higher in mordant treatment than nonmordant. Light fastness showed over 3 degree in nonmordant, premordant, simmordant(Al,Cu,Fe) and postmordant(Cu). Water fastness showed over 3 degree in dyeing water(pH3, pH5, pH7). Dry cleaning fastness showed over 3 degree in all dyeing methods. Washing fastness is showed in 2-3 degree; Al in nonmordant, premordant, simmordant and Cu in simmordant are 2-3 degree. Perspiration fastness is nearly 3-4 degree in premordant and simmordant. Perspiration fastness shows high in premordant, simmordant than postmordant. The fastness of light, water, dry cleaning, washing, perspiration shows better nonmordant, premordant, simmordant than postmordant method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.501-504
• /
• 2004

This paper proposes degree of hydration based shrinkage prediction model of 40MPa HPC. This model shows degree of hydration which is defined as the ratio between the hydrated cement mass and the initial mass of cement is very closely related to shrinkage deformation. In this study, degree of hydration was determined by CEMHYD-3D program of NIST. Verification of the predicted degree of hydration is performed by comparison between test results of compressive strength and estimated one by CEMHYD-3D. Proposed model is determined by statistical nonlinear analysis using the program Origin of Origin Lab. Co. To get coefficients of the model, drying shrinkage tests of four specimen series were followed with basic material tests. Testes were performed in constant temperature /humidity chamber, with difference moisture curing ages to know initial curing time effect. Verification with another specimen, collected construction field of FCM bridge, was given in the same condition as pre-tested specimens. Finally, all test results were compared to propose degree of hydration based model and other code models; AASHTO, ACI, CEB-FIP, JSCE, etc.

• 한국학교보건학회지
• /
• 제6권2호
• /
• pp.69-75
• /
• 1993

The questionaire survey in this study was obtained from 1256 upper elementary children in a certain elementary school in In-Cheon city from May 1 to May 31 1993. The purpose of this study was to promote an understanding on the Actual condition of oral health management and to plan a desirable solution for oral health program by surveying the current status of oarl health management. The survey was carried out by using the questionaire after being modified and complemented which was used for the survey of the study on the actual condition of oral health management by Sin Seon Hang (1989). The major results are summarized as follows: 1. General tooth brushing of respondents. 1) As for frequency, 2 times it day is highest. 2) After breakfast meal and below 3 minutes is high. 3) Respondents brushed only teeth with the direction of up and down, left and right side. 4) The period of using for one tooth brush is from 4 months to 6 months. 2. The degree of recognition on oral health knowledge is low. 3. 1) The degree of dental examine's experience with scaling experience are 26.83%. 2) Respondents who experience dental treatment are 57.88%. 3) In oral disease, dental caries is highest. 4) Great difficulty of going to the dentists' is psychological thread and next is lack of time.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.75-81
• /
• 2006

Recently, customers interest about noise of household electric appliance is growing. so, designer of product must study to reduce noise of product. Specially, in case of household electric appliance such as washing machine, there was consumers' complaint about noise that is radiated under dehydrating condition. But, in the case of washing machine, identification of noise source is not easy when washing machine is under dehydrating condition. Because various noise source influence each other, it is difficult to find out pure contribution degree about output noise. Multi-Dimensional Spectral Analysis(MDSA) is method that can remove correlation between inputs each other and express pure contribution degree about output of single input. So in this study, we analyzed contribution of each noise source on transfer pass of noise that is radiated at dehydration of washing machine using MDSA.

• 한국게임학회 논문지
• /
• 제10권6호
• /
• pp.57-65
• /
• 2010

본 논문에서는 6자유도를 갖는 병렬형 기구의 출력 속도 공간에서 성능을 평가할 수 있는 지표를 제안하였다. Manipulability와 condition number에 기반을 둔 성능 지표가 단위계의 볼일치로 인한 물리적 의미의 결함이 없도록 출력공간을 병진속도 공간과 회전속도 공간으로 분리하는 방법을 제안하였다. 각 공간에서 단위 입력에 대용하는 mobility ellipsoid를 정의하여 이를 기반으로 병진운동 출력공간에서 두 종류 성능 지표와 회전운동 공간에서 두 종류의 성능 지표를 제안하였다.