• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1154-1158
• /
• 2003

Finite element analysis of welding processes, which entail phase evolution, heat transfer and deformations, is considered in this paper. Attention focuses on numerical implementation of the thermo-elastic-plastic constitutive equation proposed by Leblond in consideration of the transformation plasticity. Based upon the multiplicative decomposition of deformation gradient, hyperelastic formulation is employed for efficient numerical integration, and the algorithmic consistent moduli for elastic-plastic deformations including transformation plasticity are obtained in the closed form. The convergence behavior of the present implementation is demonstrated via a couple of numerical examples.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.378-381
• /
• 2009

In this study, the repetitive loading-unloading tensile tests with AZ31B magnesium sheet metal have been conducted under various elevated temperatures to check out how the Young's moduli of the sheets evolve during the plastic deformation. The loading-unloading tests have been carried out at every 1% of strain increment. With the tested results, some damage parameters of magnesium sheets based on the Lemaitre's continuum damage theory could be calculated at room temperature, $100^{\circ}C$, $150^{\circ}C$, $200^{\circ}C$ and $250^{\circ}C$. It has been shown that the critical damage parameters obtained in all temperature conditions are within the range of 0.12 to 0.18.

• 소성∙가공
• /
• 제20권5호
• /
• pp.350-356
• /
• 2011

Shape memory alloys(SMAs) exhibit pseudoelastic behavior, characterized by the recovery of an original shape even after severe deformation, during loading and unloading within appropriate temperature regimes. The distinctive mechanical behavior is associated with stress-induced transformation of austenite to martensite during loading and reverse transformation to austenite upon unloading. To develop a material model for SMAs, it is imperative to consider the difference in moduli of active phases. For example, the Young’s modulus of the martensite is one-third to one half of that of the austenite. The model proposed herein is a modification of the one proposed recently by Ho[17]. The prediction of the behavior of SMAs during unloading before the onset of reverse transformation was improved by introducing a new internal state variable incorporating the variation of the elastic modulus.

• Steel and Composite Structures
• /
• 제7권5호
• /
• pp.355-376
• /
• 2007

The purpose of this study is to predict and investigate the time-dependent creep behavior of composite materials. For this, firstly the evaluation method for the modulus of elasticity of whole fiber and matrix is presented from the limited information on fiber volume fraction using the singular value decomposition method. Then, the effects of fiber volume fraction on modulus of elasticity of GFRP are verified. Also, as a creep model, the nonlinear curve fitting method based on the Marquardt algorithm is proposed. Using the existing Findley's power creep model and the proposed creep model, the effect of fiber volume fraction on the nonlinear creep behavior of composite materials is verified. Then, for the time-dependent analysis of a composite material subjected to uniaxial tension and simple shear loadings, a user-provided subroutine UMAT is developed to run within ABAQUS. Finally, the creep behavior of center loaded beam structure is investigated using the Hermitian beam elements with shear deformation effect and with time-dependent elastic and shear moduli.

• 콘크리트학회논문집
• /
• 제11권3호
• /
• pp.161-170
• /
• 1999

The KLCC Petronas Tower 2, one of the world tallest twin reinforced concrete towers constructed in Kuala Lumpur, Malysia, was instrumented during construction for the measurement of vertical time-dependent deformation of columns and corewall. Field measurements were made by means of vibrating wire strain gauges at the corewall, tower and bustle perimeter columns at selected floor levels of the building. Parallel to this observation, laboratory tests were performed on concrete cylinders made in the field in order to obtain the variations of concrete compressive strengths, elastic moduli, strains of creep and shrinkage with time. Monitored vertical deformations are in a good agreement with the prediction based on actual construction sequence and concrete properties from laboratory tests, as well as the analytical results reflected in actual column compensation of the building.

• Food Science and Biotechnology
• /
• 제15권3호
• /
• pp.474-477
• /
• 2006

Dynamic rheological properties of commercial 0.8, 1.0, and 1.2% gums [carboxylmethylcellulose (CMC), guar gum, hydroxypropylmethylcellulose (HPMC), tara gum, and xanthan gum], which can be dissolved in cold water, were investigated by small-deformation oscillatory measurements. Magnitudes of storage (G') and loss (G") moduli increased with increasing concentration of gum solutions except for xanthan gum. Guar gum exhibited greatest G' and G" values among all gums except for G' value at 0.8% concentration. Slopes of G' and G" decreased with increasing concentration of gum solutions except for xanthan gum. Tan ${\delta}$ (G"/G') values decreased with increasing concentration of gum solutions except for xanthan gum. Tan ${\delta}$ values of xanthan gum solutions were much lower than those of other gum solutions, indicating that xanthan gum solutions were predominantly more elastic than viscous.

• Food Science and Biotechnology
• /
• 제14권3호
• /
• pp.340-343
• /
• 2005

Surimi samples were prepared with the addition of three different sugars (sucrose, glucose, and fructose) at 8% and the thermal gelation of surimi sols was investigated by small-deformation oscillatory measurements of storage (G') and loss (G") moduli. The magnitudes of G' at $10^{\circ}C$ were much greater than G" over the entire range of frequency (${\omega}$), with little dependence on ${\omega}$. In general, G' values of surimi sol containing sucrose during heating (from 10 to $95^{\circ}C$) was pronounced than those of glucose and fructose, showing the following order: sucrose>glucose>fructose. The transition peaks of surimi sols containing sugars were in the temperature range of $34.8-37.4^{\circ}C$.

• Advances in nano research
• /
• 제7권5호
• /
• pp.337-349
• /
• 2019

The size-dependent vibration analysis of a cross-/angle-ply laminated composite plate when embedded on the Pasternak elastic foundation and exposed to an in-plane magnetic field are investigated by adopting an analytical eigenvalue approach. The formulation, which is based on refined-hyperbolic-shear-deformation-plate theory in conjunction with the Eringen Nonlocal Differential Model (ENDM), is tested against considering problems for which numerical/analytical solutions available in the literature. The findings of this study demonstrated the role of magnetic field, size effect, elastic foundation coefficients, geometry, moduli ratio, lay-up numbers and fiber orientations on the nonlocal frequency of cross-/angle-ply laminated composite plates.

• Steel and Composite Structures
• /
• 제48권5호
• /
• pp.583-597
• /
• 2023

This paper introduces a novel approach to multi-material topology optimization (MTO) targeting in-plane bi-directional functionally graded (IBFG) non-uniform thickness Reissner-Mindlin plates, employing an alternative active phase approach. The mathematical formulation integrates a first shear deformation theory (FSDT) to address compliance minimization as the objective function. Through an alternating active-phase algorithm in conjunction with the block Gauss-Seidel method, the study transforms a multi-phase topology optimization challenge with multi-volume fraction constraints into multiple binary phase sub-problems, each with a single volume fraction constraint. The investigation focuses on IBFG materials that incorporate adequate local bulk and shear moduli to enhance the precision of material interactions. Furthermore, the well-established mixed interpolation of tensorial components 4-node elements (MITC4) is harnessed to tackle shear-locking issues inherent in thin plate models. The study meticulously presents detailed mathematical formulations for IBFG plates in the MTO framework, underscored by numerous numerical examples demonstrating the method's efficiency and reliability.

• 대한토목학회논문집
• /
• 제29권4C호
• /
• pp.175-182
• /
• 2009

본 연구에서는 불포화토의 삼축시험시 응력-변형률 관계를 Bishop 응력으로 기술하여 분석하였다. 불포화토의 파괴포락선은 Bishop 응력으로 기술할 경우에 모관흡수력에 무관하게 유일한 관계를 나타내고 있었다. 특히 모관흡수력이 낮은 경우에는 선형적인 관계를 나타내며 실험치와 이론치가 잘 일치하고 있었다. 미소변형률 영역에서의 변형계수는 대체로 Bishop 응력에 따라 선형적으로 증가하는 추세를 보이고 있었다.