References
- K. Otsuka, C. M. Wayman, 1998, Shape memory materials, Cambridge University Press, Cambridge.
- V. Birman, 1997, Review of mechanics of shape memory alloy structures, Appli. Mech. Reviews, Vol. 50, pp. 629-645. https://doi.org/10.1115/1.3101674
- E. Patoor, A. Eberhardt, M. Berveiller, 1996, Micromechanical modeling of superelasticity in shape memory alloys, J. Phys. IV, Vol. 6, pp. 277-292.
- C. Lexcellent, B. C. Goo, Q. P. Sun, J. Bernardint, 1996, Characterization, thermomechanical behavior and micromechanical-based constitutive model of shape-memory Cu-Zn-Al single crystals, Acta Mater., Vol. 44, pp. 3773-3780. https://doi.org/10.1016/1359-6454(95)00452-1
- T. J. Lim, D. L. McDowell, 2002, Cyclic thermomechanical behavior of a polycrystalline pseudoelastic shape memory alloy, J. Mech. Phys. Solids, Vol. 50, pp. 651-676. https://doi.org/10.1016/S0022-5096(01)00088-6
- K. Tanaka, S. Nagaki, 1982, A thermomechanical description of materials with internal variable in the process of phase transitions, Ing. Arch., Vol. 51, pp. 287-299. https://doi.org/10.1007/BF00536655
- M. A. Qidwai, D. C. Lagoudas, 2000, On thermomechanics and transformation surfaces of polycrystalline NiTi shape memory alloy material, Int. J. Plasticity, Vol. 16, pp. 1309-1343. https://doi.org/10.1016/S0749-6419(00)00012-7
- Z. Moumni, W. Zaki, Q. S. Nguyen, 2008, Theoretical and numerical modeling of solid-solid phase change: Application to the description of the thermomechanical behavior of shape memory alloys, Int. J. Plasticity., Vol. 24, pp. 614-645. https://doi.org/10.1016/j.ijplas.2007.07.007
- H. Warlimont, L. Delay, H. T. Krishnan, H. Tas, 1974, Thermoelasticity, pseudoelasticity and the memory effects associated with martensitic transformations, J. Mater. Sci., Vol. 9, pp. 1545-1555. https://doi.org/10.1007/BF00552941
- D. C. Lagoudas (Ed.), 2007, Shape memory alloys: Modeling and engineering applications, Springer.
- J. A. Shaw, S. Kyriakides, 1995, Thermomechanical aspects of NiTi, J. Mech. Phys. Solids, Vol. 8, pp. 1243-1281.
- D. C. Lagoudas, P. B. Entchev, 2004, Modelling of transformation-induced plasticity and its effect on the behavior of porous shape memory alloys, Part I: constitutive model for fully dense SMAs, Mech. Mater., Vol. 36, pp. 865-892. https://doi.org/10.1016/j.mechmat.2003.08.006
- P. G. McCormick, Y. Liu, 1994, Thermodynamic analysis of the martensitic transformation in TiNi-II. Effect of transformation cycling, Acta Metall. Mater., Vol. 42, pp. 2407-2413. https://doi.org/10.1016/0956-7151(94)90319-0
- H. Sehitoglu, R. Anderson, L. Karaman, K. Gall, Y. Chumlyakov, 2001, Cyclic deformation behavior of single crystal NiTi, Mater. Sci. Eng. A, Vol. 314, pp. 67-74. https://doi.org/10.1016/S0921-5093(00)01924-9
- F. Auricchio, A. Reali, U. Stefanelli, 2007, A three-dimensional model describing stress-induced solid phase transformation with permanent inelasticity, Int. J. Plasticity, Vol. 23, pp. 207-226. https://doi.org/10.1016/j.ijplas.2006.02.012
- Q. Kan, G. Kang, 2010, Constitutive model for uniaxial transformation ratcheting of super-elastic NiTi shape memory alloy at room temperature, Int. J. Plasticity, Vol. 26, pp. 441-465. https://doi.org/10.1016/j.ijplas.2009.08.005
- K. Ho, 2010, A phenomenological constitutive model for pseudoelastic shape memory alloy, Trans. Mater. Process., Vol. 19, No.8, pp. 468-473. https://doi.org/10.5228/KSTP.2010.19.8.468
Cited by
- A phenomenological constitutive model for the pseudoelastic behavior of shape memory alloys vol.28, pp.3, 2014, https://doi.org/10.1007/s12206-013-1169-5
- A Constitutive Model for the Rate-dependent Deformation Behavior of a Solid Polymer vol.22, pp.4, 2013, https://doi.org/10.5228/KSTP.2013.22.4.216
- Prediction of Shape Recovery for Ni-Ti SMA Wire after Drawing vol.22, pp.8, 2013, https://doi.org/10.5228/KSTP.2013.22.8.470