• 대한치과기공학회지
• /
• 제46권2호
• /
• pp.21-27
• /
• 2024

Purpose: This study aimed to analyze the stress distribution and deformation in implant abutments made from titanium (Ti-6Al-4V), zirconia, and polyetheretherketone (PEEK), including their screws and fixtures, under various loading conditions using finite element analysis (FEA). Methods: Three-dimensional models of the mandible with implant abutments were created using Siemens NX software (NX10.0.0.24, Siemens). FEA was conducted using Abaqus to simulate occlusal loads and assess stress distribution and deformation. Material properties such as Young's modulus and Poisson's ratio were assigned to each component based on literature and experimental data. Results: The FEA results revealed distinct stress distribution patterns among the materials. Titanium alloy abutments exhibited the highest stress resistance and the most uniform stress distribution, making them highly suitable for long-term stability. Zirconia abutments showed strong mechanical properties with higher stress concentration, indicating potential vulnerability to fracture despite their aesthetic advantages. PEEK abutments demonstrated the least stress resistance and higher deformation compared to other abutment materials, but offered superior shock absorption, though they posed a higher risk of mechanical failure under high load conditions. Conclusion: The study emphasizes the importance of selecting appropriate materials for dental implants. Titanium offers durability and uniform stress distribution, making it highly suitable for long-term stability. Zirconia provides aesthetic benefits but has a higher risk of fracture compared to titanium. PEEK excels in shock absorption but has a higher risk of mechanical failure compared to both titanium and zirconia. These insights can guide improved implant designs and material choices for various clinical needs.

• 한국화재소방학회논문지
• /
• 제25권6호
• /
• pp.21-26
• /
• 2011

본 논문에서는 에너지원에 따른 이동전화기(SCH_W830) 배터리의 소손 패턴을 제시함으로써 소비자분쟁 해결의 자료로 활용하고자 한다. 실험이 진행될 때의 주위 온도는 $22{\pm}2^{\circ}C$, 습도는 40~60 %를 유지함으로써 신뢰성을 확보하였다. 실험에 사용된 이동전화기의 배터리 전압은 양극(+)과 음극 (1)(-) 사이의 전압은 4.19 V이며, 양극(+)과 음극 (2)(-) 사이의 전압은 4.18 V로 측정되었다. 일반화염 인가에 의한 이동 전화기의 난연성 시험은 한국산업규격(KS)을 적용하였으며, 일반화염이 30 sec 동안 외함에 인가되어도 내장된 배터리의 소손은 없는 것으로 확인되었다. 생리 식염수(NaCl, 0.9%)에 이동전화기를 180 sec 침수시킨 결과 배터리 단자 사이에 누설전류에 의한 발열로 탄화 및 용융이 발생한 흔적을 확인할 수 있었다. 전자레인지(MWO)를 이용하여 70 sec 동안 이동전화기를 가열하면 금속홀더, 충전용 커넥터, 안테나 등이 내장된 부분에서 용융 및 변색이 확인되며, 그 밖의 부분은 특이사항이 없는 것을 알 수 있다. 즉, 인가된 에너지원의 종류에 따라 이동전화기 외형의 탄화, 내장된 금속 및 유전체, 배터리 단자대의 손상 및 변형 등이 다르게 발생하지만 전압은 비교적 일정한 특성을 보이는 것으로 보아 연소의 확산 패턴, 금속의 용융 및 변형 부분의 특성을 종합적으로 고려하여 해석하면 소손 원인 판정이 가능하다.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.10-16
• /
• 2013

Ultra-fine planing and micro punching are separately used for improving surface roughness and machining dot patterns, respectively, of metal molds. If these separate machining processes are applied for machining of identical molds, there could be an aligning mismatch between the machine tool and the mold. A hybrid machining system combining ultra-fine planing and micro punching was newly developed in this study in order to solve this mismatch; hybrid process technology was also developed for machining dot patterns on a mirror surface of a metal mold. The hybrid machining system has X, Y, and Z axes, and a cam axis for ultra-fine planing. The cam axis and attachable and removable solenoid actuators for micro punching can make large and small sizes of dot patterns, respectively. Ultra-fine planing was applied in the first place to improve the surface roughness of a metal mold; the measured surface roughness was about 20nm. Then, micro punching was applied to machine dot patterns on the same mold. It was possible to control the diameter of the dot patterns by changing the input voltage of the solenoid actuator. Before machining, severe inhomogeneous plastic deformation around the machined dot patterns was also removed by annealing heat treatment. Therefore, it was verified that metal molds with dots patterns for optical products can be machined using a hybrid machining system and the hybrid process technology developed in this study.

• 한국정밀공학회지
• /
• 제34권3호
• /
• pp.199-203
• /
• 2017

Hot embossing techniques are used to engrave patterns on plastic substrates. Roll based hot embossing uses a heated roll for a continuous process. A heated roll with relief patterns is impressed on a preheated plastic substrate. Then, the substrate is cooled down quickly to prevent thermal shrinkage. The roll speed is normally very slow to ensure substrate temperature increase up to the glass transition temperature. In this paper, we propose a noncontact preheating technique using focused infrared light. The infrared light is focused as a line beam on a plastic substrate using an elliptical mirror just before entering the hot embossing roll. The mid range infrared light efficiently raises the substrate temperature. For preliminary tests, substrate deformation and temperature changes were monitored according to substrate speed. The experiments show that the proposed technique is a good possibility for high speed hot embossing.

• Journal of Information Processing Systems
• /
• 제13권2호
• /
• pp.305-320
• /
• 2017

The selection of subset size is of great importance to the accuracy of digital image correlation (DIC). In the traditional DIC, a constant subset size is used for computing the entire image, which overlooks the differences among local speckle patterns of the image. Besides, it is very laborious to find the optimal global subset size of a speckle image. In this paper, a self-adaptive and bidirectional dynamic subset selection (SBDSS) algorithm is proposed to make the subset sizes vary according to their local speckle patterns, which ensures that every subset size is suitable and optimal. The sum of subset intensity variation (${\eta}$) is defined as the assessment criterion to quantify the subset information. Both the threshold and initial guess of subset size in the SBDSS algorithm are self-adaptive to different images. To analyze the performance of the proposed algorithm, both numerical and laboratory experiments were performed. In the numerical experiments, images with different speckle distribution, different deformation and noise were calculated by both the traditional DIC and the proposed algorithm. The results demonstrate that the proposed algorithm achieves higher accuracy than the traditional DIC. Laboratory experiments performed on a substrate also demonstrate that the proposed algorithm is effective in selecting appropriate subset size for each point.

• 한국지진공학회논문집
• /
• 제7권3호
• /
• pp.57-67
• /
• 2003

Response analysis of buried pipeline subjected to permanent ground deformation(PGD) due to liquefaction is mainly executed by use of numerical analysis or semi-analytical relationship, When applying these methods, so called interfacial pipelineㆍsoil interaction force plays an dominant part. Currently used interaction force is mode up of indispensable mechanical and physical components for the response analysis of buried pipeline. However, it has somewhat limited applicability to the liquefied region since it is based on the experimental results for the non-liquefied region. Therefore, in this study, improved type of pipelineㆍsoil interaction force is proposed based on the existing interaction force and experimental research accomplishments. Above all, proposed interaction force includes various patterns of PGD or spatial distributions of interaction force caused by the decrease of soil stiffness. Through the comparison of numerical results using the proposed and the existing interaction force, relative influences of interaction force on the response of pipeline are evaluated and noticeable considerations in the application of semi-analytical relationship are discussed. Moreover, analyses due to the change of pipe thickness and burial depth are performed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.351-356
• /
• 1999

In this study, the characteristics of chip formation of the cold drawn Bi-S free machining steels were assessed. And for comparison, those of the cold drawn Pb-S free machining steel, the hot rolled low carbon steel which has MnS as free machining inclusions and the conventional steels were also investigated. During chip formation, the cold drawn free machining steels show relatively little change in thickness and width of chip compare to those of the conventional carbon steels. And a single parameter which indicates the degree of deformation during chip formation, 'chip cross-section area ratio' is introduced. The chip cross-section area. The variational patterns of cross-section area is divided by undeformed chip cross-section area. The variational patterns of the chip cross-section area ratio of the materials cut are similar to those of the shear strain values. The shear stress, however, seems to be dependent on the carbon content of the materials. The cold drawn BiS and Pb-S steels show nearly the same chip forming behaviors and the energy consumed during chip formation is almost same. A low carbon steel without free machining aids shows poor chip breakability due to its high ductility. By introducing a small amount of non-metallic inclusions such as MnS, Bi, Pb or merely increasing carbon content the chip breakability improves significantly.

• Design & Manufacturing
• /
• 제10권2호
• /
• pp.6-11
• /
• 2016

Designed patterns of slit are introduced to the uni-directional (UD) prepreg in order to enhance the formability of the carbon/epoxy composites without wrinkling and laddering. Three different types of the slit alignment along the thickness direction are applied to analyse the deformation behavior during the compression moulding process of laminates. Degrees of the slit open and the mechanical strength are evaluated based on the level of the compaction pressure in the course of forming process. Results have shown that the mechanical strength of laminates having slits could attain at least 80% of the conventional ones without slits. However, further studies are required to identify the direct relevance of the slit alignment in laminate to the mechanical properties.

• Structural Engineering and Mechanics
• /
• 제76권6호
• /
• pp.765-779
• /
• 2020

This article presents a nonclassical size dependent model based on the modified couple stress theory to study and analyze the bending behavior of perforated microbeams under different loading patterns. Modified equivalent material and geometrical parameters for perforated beam are presented. The modified couple stress theory with one material length scale parameter is adopted to incorporate the microstructure effect into the governing equations of perforated beam structure. The governing equilibrium equations of the perforated Timoshenko as well as the perforated Euler Bernoulli are developed based on the potential energy minimization principle. The Poisson's effect is included in the governing equilibrium equations. Regular square perforation configuration is considered. Based on Fourier series expansion, closed forms for the bending deflection and the rotational displacements are obtained for simply supported perforated microbeams. The proposed methodology is validated and compared with the available results in the literature and an excellent agreement is detected. Numerical results demonstrated the applicability of the proposed methodology to investigate the bending behavior of regularly squared perforated beams incorporating microstructure effect under different excitation patterns. The obtained results are significantly important for the design and production of perforated microbeam structures.

• Steel and Composite Structures
• /
• 제45권5호
• /
• pp.641-652
• /
• 2022

Fluid-conveying tubes are widely used to transport oil and natural gas in industries. As an advanced composite material, functionally graded carbon nanotube-reinforced composites (FG-CNTRC) have great potential to empower the industry. However, nonlinear free vibration of the FG-CNTRC fluid-conveying pipe has not been attempted in thermal environment. In this paper, the nonlinear free vibration characteristic of functionally graded nanocomposite fluid-conveying pipe reinforced by single-walled carbon nanotubes (SWNTs) in thermal environment is investigated. The SWCNTs gradient distributed in the thickness direction of the pipe forms different reinforcement patterns. The material properties of the FG-CNTRC are estimated by rule of mixture. A higher-order shear deformation theory and Hamilton's variational principle are employed to derive the motion equations incorporating the thermal and fluid effects. A two-step perturbation method is implemented to obtain the closed-form asymptotic solutions for these nonlinear partial differential equations. The nonlinear frequencies under several reinforcement patterns are presented and discussed. We conduct a series of studies aimed at revealing the effects of the flow velocity, the environment temperature, the inner-outer diameter ratio, and the carbon nanotube volume fraction on the nature frequency.