• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.1 s.39
• /
• pp.61-66
• /
• 2007

The final object of this research is to construct general management system that can manage diverse facilities of city on the basis of ubiquitous technology. Defining data format of items in each management, type and code for the urban facilities, the researcher designed database of urban facilities through the process of establishing logic model and data modelling. By inputting designed database into RFID Tag of each urban facilities and using RFID Reader and PDA, the researcher developed system that can efficiently manage the basic attributes and information and management information of urban facilities. Applying the general management system for urban facilities constructed on the basis of ubiquitous, the researcher could check the information of target facilities and input revised data. Further, it was found that the characteristics of RFID Tag and GPS should improve the optimal hardware combination and PDA performance for the surrounding environmental influence and system performance.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.8-14
• /
• 2007

Water quality in Lake Rotorua, New Zealand, deteriorated since the 1960s because of excessive phytoplankton growths due principally to increasing nitrogen and phosphorus in the lake waters. Nutrient concentrations in eight of the nine major streams feeding Lake Rotorua have increased since 1965. The groundwater system has a key role in the hydrology of the Lake Rotorua catchment and the groundwater system is probably the control on the time delay between intensification of agricultural land use and response of surface water quality. All major, and many minor streams, in the catchment are fed by springs. Two lithological units are most important to groundwater flow in the Lake Rotorua catchment: Mamaku Ignimbrite, erupted in about 200,000 years ago and Huka Formation sediments which filled the caldera left by the Mamaku Ignimbrite eruption. Rainfall recharge to groundwater in the groundwater catchment of Lake Rotorua is estimated as approximately 17300 L/s. A calibrated steady-state groundwater flow model estimates that approximately 11100 L/s of this flow discharges into streams and then into the lake and the balance travels directly to Lake Rotorua as groundwater discharge through the lake bed. Land use has impacted on groundwater quality. Median Total Nitrogen (TN) values for shallow groundwater sites are highest for the dairy land use (5.965 mg/L). Median TN values are also relatively high for shallow sites with urban-road and cropping land uses (4.710 and 3.620 mg/L, respectively). Median TN values for all other uses are in the 1.4 to 1.5 mg/L range. Policy development for Lake Rotorua includes defining regional policies on water and land management and setting an action plan for Lake Rotorua restoration. Aims in the action plan include: definition of the current nutrient budget for Lake Rotorua, identification of nutrient reduction targets and identification of actions to achieve targets. Current actions to restore Lake Rotorua water quality include: treatment of Tikitere geothermal nitrogen inputs to Lake Rotorua, upgrade of Rotorua City sewage plant, new sewage reticulation and alum dosing in selected streams to remove phosphorus.

• Science of Emotion and Sensibility
• /
• v.11 no.1
• /
• pp.69-80
• /
• 2008

The scheme to approach emotional design developed in various way of research without defining criterion of emotional way. A aim of this research to derive a new way of approaching system and construct the process in emotional design. In first experiments, analyze meaning of important factors in cooking kits to construct the model of emotional approaching system by the analysis of quantification theory type 3. This shows that four emotional factors as shape, atmosphere, functional matter, information are deeply related with emotional thinking and design. Consequently, the way of emotional approaching in cooking kit have several conditions essentially as following these; 1.Is it have functional advantages to cook? 2. Is it good looking in shape? 3. Is it possible to make some of mood on cooking? 4. How much information of cook we get in? These conditions were classified in detail to establish emotional design system.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.6
• /
• pp.11-24
• /
• 2019

The tendency of buyers of web information is changing from the cost-effectiveness to the cost-satisfaction. There is such tendency in the recommendation of multimedia contents, some of which are folksonomy-based recommendation services using mood. However, there is a problem that they does not consider synonyms. In order to solve this problem, some studies have solved the problem by defining 12 moods of Thayer model as AV values (Arousal and Valence), but the recommendation performance is lower than that of a keyword-based method at the recall level 0.1. In this paper, we propose a method based on using mood vector of multimedia contents. The method can solve the synonym problem while maintaining the same performance as the keyword-based method even at the recall level 0.1. Also, for performance analysis, we compare the proposed method with an existing method based on AV value and a keyword-based method. The result shows that the proposed method outperform the existing methods.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.2
• /
• pp.14-25
• /
• 2009

Many companies have managed their business performance in order to achieve their enterprise purpose. Performance management which applied concept of BSC (Balanced Scorecard) is widely used all over the world. In the construction industry, BSC-based performance management is currently introduced with needs of balanced performance evaluation. However, most companies actually have intermediate level of adapting BSC. It is important to understand its process or and structure. Therefore, this paper is focused on making performance management process and defining each phase of it. In addition, the model and system are established with putting them together. With developing performance process in construction, the construction companies are supposed to detect the deficiencies of the current performance management systems and take some opportunity to be helped for supporting their decision-making. In conclusion, this paper will provide the construction industry with the opportunities to enhance the values of performance management system and construction application.

• Imaging Science in Dentistry
• /
• v.42 no.2
• /
• pp.89-93
• /
• 2012

Purpose : Clinicians commonly encounter cases in which it is difficult to determine whether adjacent radiopacities are normal or pathologic. The ideal radiopacity of composite resin is equal to or higher than that of the same thickness of aluminum. We aimed to investigate the possible effects of different curing times on the post-24-hour radiopacity of composite resins on digital radiographs. Materials and Methods : One mm thick samples of Filtek P60 and Clearfil resin composites were prepared and cured with three regimens of continuous 400 mW/$cm^2$ irradiance for 10, 20 and 30 seconds. Along with a 12-step aluminum step wedge, digital radiographs were captured and the radiopacities were transformed to the equivalent aluminum thicknesses. Data were compared by a general linear model and repeated-measures of ANOVA. Results : Overall, the calculated equivalent aluminum thicknesses of composite resins were increased significantly by doubling and tripling the curing times (F(2,8)=8.94, p=0.002). Notably, Bonferroni post-hoc tests confirmed that the radiopacity of the cured Filtek P60 was significantly higher at 30 seconds compared with 10 seconds (p=0.04). Although the higher radiopacity was observed by increasing the time, other comparisons showed no statistical significance (p>0.05). Conclusion : These results supported the hypothesis that the radiopacity of resin composites might be related to the duration of light curing. In addition to the current standards for radiopacity of digital images, defining a standard protocol for curing of dental materials should be considered, and it is suggested that they should be added to the current requirements for dental material.

• Safety and Health at Work
• /
• v.9 no.2
• /
• pp.224-231
• /
• 2018

Background: Organizations are pursing complex and diverse aims to generate higher profits. Many workers experience high work intensity such as workload and work pressure in this organizational environment. Especially, psychological burden is a commonly used term in workplace of Republic of Korea. This study focused on defining the psychological burden from the perspective of occupational safety and health and tried to develop a scale for psychological burden. Methods: The 48 preliminary questionnaire items for psychological burden were prepared by a focus group interview with 16 workers through the Copenhagen Psychosocial Questionnaire II and Mindful Awareness Attention Scale. The preliminary items were surveyed with 572 workers, and exploratory factor analysis, confirmatory factor analysis, and correlation analysis were conducted for a new scale. Results: As a result of the exploratory factor analysis, five factors were extracted: organizational activity, human error, safety and health workload, work attitude, and negative self-management. These factors had significant correlations and reliability, and the stability of the model for validity was confirmed using confirmatory factor analysis. Conclusion: The developed scale for psychological burden can measure workers' psychological burden in relation to safety and health. Despite some limitations, this study has applicability in the workplace, given the relatively small-sized questionnaire.

• Management & Information Systems Review
• /
• v.10
• /
• pp.1-31
• /
• 2002

As the modern society is called the narcissistic society, the narcissism is widespread in the personality of individuals and the society at large. In consideration of this side, this study explored for several characteristics of the narcissistic personality and the job stress, and explored for the relationships between the two things theoretically. The narcissism is an attempt to repair self-esteem weakened by the splitting anxiety, the lack and the pathological fusion of self-structure. The job stress is a factor that a characteristic of the job influenced on the behavioral and affective response of the person on the job directly or indirectly. This study selected organizational justices, organizational constraints, role conflict, role ambiguity, role overload, organizational climate, interpersonal relations and career development as factors of the job stress. This study viewed that the stress is made from an interaction between environmental stimulus and personal particular reaction by defining the stress as an interaction model of stimulus-response and personal reaction is caused by psychological adjustment process, personal differences. On this occasion, this study discussed that the narcissistic personality is easy to get stress and weak in the job stress with regarding the personality as a mediation variation of psychological process. As a result, the narcissists estimated themselves positively and their self-esteem is high, but they excessively showed a self biased cognitive and affective response about the negative feedback to protect themselves. Moreover, this positive estimate on themselves and high self-esteem was vulnerable and weak in the self threat. In this view, the narcissistic personality is easy to get more job stress such as organizational justices, organizational constraints, role conflict, role ambiguity, role overload, organizational climate, interpersonal relations and career development.

• The KIPS Transactions:PartA
• /
• v.10A no.4
• /
• pp.397-404
• /
• 2003

Dedicated-purpose embedded Java system usually takes such model that all class files are converted into a single ROM Image by the ROMizer in the host computer, and then the Java virtual machine in the embedded system executes the image. Defining the ROM Image is a very important issue for embedded system with limited memory resource and low-performance processor since the format directly influences on the memory usage and effectiveness of accessing entries in classes. In this paper we have analyzed the ROMizer and especially the format of the ROM image implemented in the simpleRTJ embedded Jana virtual machine. The analysis says that memory space can be saved up to 50% compared to the original class file and access speed exceeds up to six times with the use of the ROMizer. The result of this study will be applied to develop a more efficient ROMizer for a ROM-based embedded Java system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.26 no.4
• /
• pp.82-90
• /
• 2003

The Systems Engineering, as a methodology for engineering and management of today's ever-growing complex system, is a comprehensive and iterative problem-solving process. The process centers on the analysis and management of the stakeholders' needs throughout the entire life-cycle of a system and searches for an optimized system architecture. There are many essential needs and requirements to be met when a system development task is carried out. Systems Engineering Management Plan(SEMP), as a specification for system development process, must be established to satisfy constraints and requirements of stakeholders successfully and to prevent cost overrun and schedule delay. SEMP defines technical management functions and comprehensive plans for managing and controlling the entire system development process, specialty engineering processes, etc. Especially. in the case of a large-scale complex system development program where various disciplinary engineering such as mechanical; electrical; electronics; control; telecommunication; material; civil engineering etc. must be synthesized, it Is essential to develop SEMP to ensure systematic and continuous process improvements for quality and to prevent cost/schedule overruns. This study will enable the process knowledge management on the subject of SEMP as a core systems engineering management effort, that is, definitely defining and continuously managing specification of development process about requirements, functions, and process realization of it using a computer-aided systems engineering software. The paper suggests a systematic SEMP development process and demonstrates a data model and schema for computer-aided systems engineering software, RDD-100, for use in the development and management of SEMP. These are being applied to the systems engineering technology development task for the next-generation high-speed railway systems in progress.