• 제목/요약/키워드: Defense reaction

검색결과 258건 처리시간 0.037초

Macromolecular Cytosolic Delivery: Cell Membranes as the Primary Obstacle

  • Larson, Gretchen M.;Lee, Kyung-Dall
    • Archives of Pharmacal Research
    • /
    • 제21권6호
    • /
    • pp.621-628
    • /
    • 1998
  • The "evolution" of a thing, a custom, an organ is thus by no means its progressus toward a goal, even less a logical progressus by the shortest route and with the least expendit ure of force, but a succession of more or less profound, mutually independent processes of subduing, plus the resistances they encounter, the attempts at transformation for the purpose of defense and reaction, and the results of successful counteractions. The form is fluid, but the "meaning" is even more so (Friedrich W. Nietzsche).

  • PDF

Gill Tissue Reactions to an Epitheliocystis Infection in Cultured Red Seabream, Pagrus major

  • Syasina, Iraida;Park, In-Seok;Kim, Jong Min
    • 한국어병학회지
    • /
    • 제17권2호
    • /
    • pp.105-111
    • /
    • 2004
  • Tissue reactions in gills of cultured red seabream, Pagrus major, toan epitheliocystis infection are described. Basophilic intracellular inclusions in gills contained prokaryotes, most probably a Chlamydia-like organisms according to morphological characteristic. A few types of tissue reaction were found around the inclusions: encapsulation, epithelial hyperplasia, lamellar fusion, and inflammation. It was considered that eosinophilic granule cells and macrophages might take part in defense reactions against this prokaryotic organism.

함정 탑재 2차원/3차원 탐색레이더 선택의 고려 요소 (Parameters for Selecting the Shipboard 2D/3D Surveillance Radar)

  • 박태용
    • 한국정보통신학회논문지
    • /
    • 제18권1호
    • /
    • pp.233-237
    • /
    • 2014
  • 레이더 기술의 발전 추세 및 나날이 증가하는 대공 위협에 대한 대응시간의 단축을 위해 함정에 3차원 탐색레이더의 탑재가 선호되고 있다. 본 논문에서는 3차원 탐색레이더가 2차원 탐색레이더 대비 대응시간이 얼마나 단축되는지 실험을 통해 확인하였고 함정의 임무, 성능, 주변국 위협 현황, 경제적 여건 등 최적의 레이더 선택을 위한 고려 요소에 대해 제안하였다.

리튬 함량 및 단위 셀 압력이 열전지용 리튬 음극의 방전 성능에 미치는 영향 (Effect of Lithium Contents and Applied Pressure on Discharge Characteristics of Single Cell with Lithium Anode for Thermal Batteries)

  • 임채남;안태영;유혜련;하상현;여재성;조장현;윤현기
    • 한국전기전자재료학회논문지
    • /
    • 제32권2호
    • /
    • pp.165-173
    • /
    • 2019
  • Lithium anodes (13, 15, 17, and 20 wt% Li) were fabricated by mixing molten lithium and iron powder, which was used as a binder to hold the molten lithium, at about $500^{\circ}C$ (discharge temp.). In this study, the effect of applied pressure and lithium content on the discharge properties of a thermal battery's single cell was investigated. A single cell using a Li anode with a lithium content of less than 15 wt% presented reliable performance without any abrupt voltage drop resulting from molten lithium leakage under an applied pressure of less than $6kgf/cm^2$. Furthermore, it was confirmed that even when the solid electrolyte is thinner, the Li anode of the single cell normally discharges well without a deterioration in performance. The Li anode of the single cell presented a significantly improved open-circuit voltage of 2.06 V, compared to that of a Li-Si anode (1.93 V). The cut-off voltage and specific capacity were 1.83 V and $1,380As\;g^{-1}$ (Li anode), and 1.72 V and $1,364As\;g^{-1}$ (Li-Si anode). Additionally, the Li anode exhibited a stable and flat discharge curve until 1.83 V because of the absence of phase change phenomena of Li metal and a subsequent rapid voltage drop below 1.83 V due to the complete depletion of Li at the end state of discharge. On the other hand, the voltage of the Li-Si anode cell decreased in steps, $1.93V{\rightarrow}1.72V(Li_{13}Si_4{\rightarrow}Li_7Si_3){\rightarrow}1.65V(Li_7Si_3{\rightarrow}Li_{12}Si_7)$, according to the Li-Si phase changes during the discharge reaction. The energy density of the Li anode cell was $807.1Wh\;l^{-1}$, which was about 50% higher than that of the Li-Si cell ($522.2Wh\;l^{-1}$).

폴리프로필렌글리콜을 글리콜 성분으로 하는 폴리우레탄 수지의 합성 및 물성에 관한 연구 (A study on the Synthesis end Properties of Polyurethane Resin Based on PPG as a Glycol)

  • 유길상;최상구
    • Elastomers and Composites
    • /
    • 제35권3호
    • /
    • pp.205-214
    • /
    • 2000
  • TDI에 PPG 3000을 기재로 사용하고 PPG 400, PPG 1000, PPG 2000을 $0{\sim}50%$ 혼합 사용하여 프리폴리머형 폴리우레탄수지를 합성한 후 합성 내용을 분석하고 합성물의 물성을 조사하였다. 반응은 촉매를 합성 초기에 넣었을 때에는 글리콜이 TDI 적하시에 대부분 반응되어 점도의 급상승이 일어나 불안하였지만 $40^{\circ}C$에서 무촉매 상태로 TDI를 적하시킨 후 $60^{\circ}C$ 승온 후에 촉매를 넣었을 때에는 매우 안정하였다. 인산을 사용하면 $40^{\circ}C$에서 부반응이 억제되어 점도는 낮아지지만 경화반응시 입체적으로 가교되지 못해 가교속도는 느리게 나타났다. 경화속도는 NCO/OH의 비보다는 분자의 입체적 구조에 더 영향을 받았다. 접착력은 글리콜 성분 중에 PPG 400을 적어도 30%(wt.%) 이상 사용하였을 때 PPG 400에 의한 가교밀도 상승으로 보다 우수한 물성을 나타내었다.

  • PDF

메탈폼 지지체를 이용한 액체연료 분해반응 촉매의 흡열특성 (Endothermic Properties of Liquid Fuel Decomposition Catalyst Using Metal Foam Support)

  • 문정인;김나리;정병훈;정지훈
    • Korean Chemical Engineering Research
    • /
    • 제59권4호
    • /
    • pp.481-486
    • /
    • 2021
  • 극초음속 비행체의 비행 중에 발생되는 열 문제를 해결하기 위해 탑재된 연료의 분해반응 시 나타나는 흡열효과를 이용하는 냉각기술이 개발되고 있다. 본 연구에서는 HZSM-5를 촉매로 사용하여 n-dodecane 연료의 분해반응을 수행하였으며, 촉매 분해반응의 흡열효과를 극대화하고 코크생성을 억제하기 위해 촉매를 메탈폼에 코팅하였다. 반응기는 외경 1.27 cm의 스테인리스 스틸 흐름형 반응기를 사용하였다. HZSM-5를 메탈폼에 코팅한 촉매를 사용한 촉매 분해반응 결과 흡열량은 최대 2887 kJ/kg, 기상전환율은 34% 이었으며, 메탈폼의 코크생성량은 촉매를 코팅함에 따라 촉매를 코팅하지 않은 것에 비해 약 56% 감소하였다.

저온 분사 공정을 통하여 형성된 Al/Ni 복합소재 코팅의 특성 평가 (Property Evaluation of Kinetic Sprayed Al-Ni Composite Coatings)

  • 변경준;김재익;이창희;김시조;이성
    • Journal of Welding and Joining
    • /
    • 제32권5호
    • /
    • pp.72-79
    • /
    • 2014
  • Shaped charge(SC) ammunition is a weapon that penetrates directly the target by made jet from metal liner on impacting at a target. In SC, the liner occupies significantly important role causing an explosion and penetration of the target. The Al-Ni composite coating was deposited on copper liner in a solid state via kinetic spraying to improve the explosive force. The mechanical properties, reactivity and microstructure were investigated to confirm the possibility of kinetic sprayed Al/Ni composite coating as a reactive liner material. Reactive liner using Al/Ni composite exhibited much enhanced reactivity than pure copper liner due to Self-propagating High-temperature Synthesis (SHS) reaction with significantly improved adhesive bond strength. Especially, among the Al/Ni composite coatings, AN11 (the Al versus Ni atomic percent ratio is 1:1) showed the greatest reactivity due to its widest reaction area between deposited Al and Ni.

원뿔형 비구면 레이돔에 대한 전자파 해석 기법 개발 (Development of an Electromagnetic Analysis Methodology for the Aspheric Ogival Radome)

  • 서승희;조지현
    • 한국전자파학회논문지
    • /
    • 제20권7호
    • /
    • pp.617-624
    • /
    • 2009
  • 본 논문에서는 가역 정리에 기초한 반응 이론을 이용하여 유도탄 및 항공기 등에 적용되는 원뿔형 비구면 레이돔에 대한 전자파 성능 해석 방법을 제안하였으며 제작된 레이돔에 대한 전자파 성능 측정 결과를 해석 결과와 비교함으로써 제안한 해석 방법의 타당성을 검증하였다. 안테나는 "X" 형태의 2축 모노펄스 구조를 갖는 도파관 슬롯 배열 안테나로 가정하였다. 레이돔 형상은 본 칼만 형태로 가정하였으며, 레이돔 길이 대 직경비를 2:1 로 가정하였다. 실제 제작된 레이돔에 대한 전자파적 특성은 레이돔 전용 측정 장비를 이용하여 측정하였으며, 레이돔 측정 결과가 본 논문에서 제시한 해석 기법을 이용하여 해석한 결과와 잘 일치하는 것을 확인하였다. 본 논문에서 개발한 해석 기법은 유도탄이나 항공기용 레이돔 개발에 적용할 수 있을 것으로 기대된다.

어류혈청의 보체에 의한 살균작용 (Bactericidal action by complement of fish serum)

  • 유병화;박수일;전세규
    • 한국어병학회지
    • /
    • 제5권1호
    • /
    • pp.9-18
    • /
    • 1992
  • 어류의 방어기구를 밝히기 위하여, 잉어, 틸라피아 및 넙치의 혈청 중에 존재하는 보체의 살균작용에 대하여 실험하였다. 실험어의 모든 정상혈청으로 E. coli는 살균되었고 가열하여 보체를 불활성화시킨 혈청에서는 살균되지 않았다. zymosan으로 처리한 실험어의 정상혈청에서는 살균작용이 나타나지 않았으므로 정상혈청 중의 살균작용에도 보체의 대체경로가 중요한 것으로 생각되었다. EGTA로 처리한 틸라피아와 넙치의 정상혈청에서는 살균작용이 지속되고 있었으나, 잉어의 살균작용은 소실되는 점으로 봐서 잉어의 대체경로에는 $Ca^{2+}$이 요구되는 것으로 나타났다. 실험어의 정상혈청이 병원성이 있는 E. tarda에 대해서는 살균작용을 나타내지 않았고 병원성이 없는 E. coli에 대해서는 살균작용을 나타냈다. E. coli와 E. tarda는 면역혈청 중에서 모두 살균되었고 그 살균속도는 정상혈청에 비하여 빠른 것으로 나타났다.

  • PDF

과산화수소 증기를 이용한 유사화학작용제의 제독 (Decontamination of Chemical Warfare Agent Simulants using Vapor-phase Hydrogen Peroxide)

  • 김윤기;유현상;김민철;황현철;류삼곤;이해완
    • Korean Chemical Engineering Research
    • /
    • 제52권3호
    • /
    • pp.360-365
    • /
    • 2014
  • 과산화수소 증기는 기존 염소계열의 멸균제에 비해 부식성이 낮아 제약 및 의료 분야의 실내멸균제로 사용되며, 암모니아 가스 추가 시 화학작용제의 제독성능이 있다고 알려져 있다. 본 연구에서는 과산화수소 증기를 이용하여 HD, GD, VX의 유사작용제인 CEPS, DFP, dimethoate 등에 대한 제독효율을 확인하였다. 이를 위해 자체 구성한 과산화수소 기화장치에서 발생시킨 증기를 제독챔버에 주입하여 반응시간을 유지하였다. 제독 후 잔류물을 GC/MS로 분석한 후 제독효율을 계산하였고, 각각의 유사작용제에 대한 반응 생성물을 통해서 화학작용제의 반응 메카니즘과 유사함을 확인하였다. 실험결과 CEPS는 30%의 상대습도에서 60분의 반응시간에 완전제독 되었고, 암모니아 가스 주입의 동반하에서 DFP는 30분, dimethoate는 150분의 반응시간에 완전제독되었다.