• Journal of the Korea Institute of Military Science and Technology
• /
• 제21권5호
• /
• pp.665-674
• /
• 2018

In this paper, we propose a development results of a D-type non-rechargeable lithium battery($Li/SOCl_2$) on improvement in a low cost protection circuit of discharge for domestic military power source. According to this study, we describe a new design and product with 8-bit microcontroller in the protection circuit which can estimate state of health of the battery regardless of occurring an initial voltage delay. Also this paper discuss and facilitate development as solution to a safety about the non-rechargeable lithium batteries. As a result, we verified a quality of the protection circuit by a development test and evaluation(DT&E) process.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제20권2호
• /
• pp.159-169
• /
• 2017

This study aims to the increasing the reliability of gun firing system of patrol killer guided missile from failure mode analysis. In order to find out the breakdown parameter, the examination process of the sources of the problems and the quality improvement activities are analyzed with performance testing data. From this study, the rate of operation and the reliability of 76 mm naval guns will be increase. And the result of the study is expected to be used as a reference data in the naval gun firing system for another failure mode analysis.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제18권4호
• /
• pp.343-349
• /
• 2015

This is a study for the improvement of the fractured lug structure that connects the landing gear to the fuselage of the aircraft using the composite leaf spring landing gear. The lug surface was analyzed to find out the cause of fracture. The lug was destroyed by the crack initiation and propagation under the repeated stresses. The frictional wears of the lug structure were proceeded and that affected adversely to the crack. Also, the square protrusion of the lug has a weak shape to bring about stress concentration. The design changes were conducted and the test was performed to verify changed design results.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제27권2호
• /
• pp.238-246
• /
• 2024

Modern military operations rely heavily on broadband communication and data transmission. Recently, the rising use of intelligent unmanned technology necessitates more frequencies. Free-space optical(FSO) communication can offer high-data-rate communications with high security and no need for licensing. Therefore, the FSO communication holds significant interest and potential in the defense industry. In this paper, we present design of a FSO communication terminal taking Korean domestic weather conditions into account. The domestic atmospheric attenuation is analyzed using several models and two-year meteorological information for a city in Korea, and this analysis is utilized to design the FSO communication terminal. The design results were verified using an FSO communication test bed, and we achieved an Ethernet bandwidth of approximately 1.86 Gbps at a distance of 1.3 km with the optical amplifier output power of the test bed set to about 20 dBm.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제21권4호
• /
• pp.481-488
• /
• 2018

This study suggest the improvement of the CFRP adhesive mixing ratio about acoustic window to enhance SONAR performance. The CFRP of submarine is produced by allocation an acoustic window zone by the beam width of SONAR sensors. During the sea trial, SONAR system's bearing and range accuracy data is not in tolerance due to debonding phenomenon on CFRP. The inappropriate mixing ratio of adhesives caused that peeling phenomenon occurred in the acoustic window part, which is the reason for the deterioration of SONAR sensors performance. The report includes explanation of test procedure of SONAR, root cause analysis, CFRP manufacturing procedure, laboratory tests results, and proof of the performance at the sea trial.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제17권3호
• /
• pp.387-393
• /
• 2014

The combustion pressure and thrust of aft-igniter were measured to investigate the characteristics of ignition charge. Granule and pellet shape ignition charge of $BKNO_3$ and MTV(Magnesium-Teflon-Viton) were used for igniters. Ignitions with granule charges show abrupt increases of combustion pressure and thrust compared to those of pellet charge. $BKNO_3$ igniter shows higher combustion pressure than MTV igniter due to higher combstion rate. Mg particle size affects the combustion pressure of MTV igniter.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제19권1호
• /
• pp.1-8
• /
• 2016

In this paper, we have described the performance improvement of surveillance radar to prevent damage or malfunction of surveillance radar RF head unit due to the strong reflections caused by artificial obstacles at close range. We have proposed a technique to improve the performance of the RF head unit as a solution to overcome the limitations of the operating system and improve radar performance. We have verified the effectiveness of the improvement by comparing the before and after results applied to actual system.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제23권3호
• /
• pp.257-266
• /
• 2020

It is very important to share tactical information such as video, images, and text messages among soldiers for situational awareness. Under the wireless environment of the battlefield, the available bandwidth varies dynamically and is insufficient to transmit high quality images, so it is necessary to minimize the distortion of the area of interests such as targets. A natural operating method for soldiers is also required considering the difficulty in handling while moving. In this paper, we propose a natural ROI(region of interest) setting and image compression method for effective image sharing among soldiers. We verify the proposed method through prototype system design and implementation of eye gaze detection and ROI-based image compression.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제27권2호
• /
• pp.177-188
• /
• 2024

The strategic UAV for theater level ISR(Intelligence, Surveillance and Reconnaissance) mission typically has numerous ground targets over area of responsibility(AOR) or area of operation(AO). It is necessary to automatically incorporate these multitude of ground targets into mission planning process in order to collect ISR images before actual flight mission. In addition, weather information such as wind direction and/or velocity may have significant impacts on the qualities of collected sensor images, especially in SAR(Synthetic Aperture Radar) images. Thus weather factors in the operation altitude should also be considered in the mission planning stage. In this study, we propose a novel mission planning scheme based on target scheduling and deviation correction method incorporating weather factors.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제27권1호
• /
• pp.51-59
• /
• 2024

Uumanned aerial vehicle(UAV) systems have been used in various fields including industry and military. According to increasing the number of UAVs, the attention on interoperable UAV systems is increasing. In this paper, we propose the practical design of datalink in interoperable UAV systems. For practical design, we firstly review the operational scenarios in the interoperable UAV system. We then propose the system model of the datalink in interoperable UAV system. Consequently, the technical components such as the design of the network, the link management, the support of the multicast transmission, the support for autonomous mission and flight safety, and the datalink security are derived and reviewed for the practical design.