• Journal of Korean Society for Quality Management
• /
• v.43 no.3
• /
• pp.299-312
• /
• 2015

Purpose: This paper analyzes the phenomenon on the degradation of the electrical performance by the pressure in the manufacturing process of sandwich type radomes. Methods: This paper consists of two steps to analyze the relation between the electrical performance and the pressure. First, the thickness of the core of the flat panels which were fabricated with different pressure was measured with the microscope, and then the electrical performance of the flat panels was analyzed with simulation and experiment. Based on the results of the electrical performance and the measured thickness with respect to the flat panels, the relation between the electrical performance and the applied pressure in the manufacturing process was analyzed. Results: The simulated and measured results with respect to the flat panel shows that the high pressure results in the nonuniform thickness of the core, which is applied to the radome fabrication. As a result, the degradation of the electrical performance occurs because the unintended scattered field is generated as the electromagnetic wave transmits (or impinges upon) the radome. Furthermore, we observed that the electrical performance of both the flat panel and the radome got worse as the high pressure was applied. Conclusion: Through simulation and experiment, therefore, it is demonstrated that for the high pressure in the manufacturing process the nonuniform thickness of the core increases and results in the degradation of the electrical performance of the radome.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.1
• /
• pp.201-210
• /
• 2011

Each area of society has changed because of the development of information technology. Especially, the advent of NCW based on the technology of network has become a new paradigm for executing warfare. Effectiveness of NCW can be maximized by building the C4I system which is a core system of NCW. However, if we don't consider the influence in term of human dimension, we can't expect the effect of C4I system, since the key factor in C4I is human. In this paper, we propose an algorithm for evaluating Combat Power Effectiveness by considering the Influence of Human Factors that wasn't reflected in the past. Based on experimental validation our algorithm is more substantial than baseline algorithms. In addition, we proved that the Influence of Human Factors(e.g. collaboration) is the most important in battlefield. Therefore, proposed algorithm can be used for enhancing not only mission effectiveness in terms of military field but also work performance by effective Human Resource Management in terms of an enterprise.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.446-458
• /
• 2017

In order to make a decision about the acquisition of command control communication weapon systems considering the client's technology level requirements, the improvement of the domestic technology level and security of core technology, the person in charge can perform technology evaluation/analysis based on command control communication weapon system patent data. As a method of collecting such patent data, we can collect the patent data of government-designated (Defense Acquisition Program Act Article 35) companies (11 Major defense companies/9 General defense companies) through the Korea Intellectual Property Rights Information System (KIPRIS) of the Korean Intellectual Property Office (KIPO) In this way, we collected 1,526 patents and 134 International Patent Classification (IPC) types through the KIPRIS of the KIPO. Based on these data, we performed three types of analysis, General information analysis, Principal Components Analysis (PCA) and Network analysis, and extracted 27, 19 and 13 IPC types from them, respectively. Based on the above three analysis results, we confirmed 8 IPC types (F41A, F41G, G06F, G01S, H04B, H04L, H04M and H04W) as the key technologies and representative technology fields of domestic communication-electronics defense companies.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.6
• /
• pp.712-720
• /
• 2016

The purpose of this study was to inspect ballistic match of copper bullet at 4 points by analyzing vertical deviation about shot group of the 5.56 mm common bullets and copper bullets. The 5.56 mm bullet with new copper core material was developed for mitigation of environmental pollution and harmfulness to human body. The results of this study are as follows; using the regression analysis, estimated reference value of ballistic match were 51.6 mm, 64.9 mm, 87.3 mm and 99.6 mm at 25 m, 100 m, 200 m and 250 m range respectively. When analyzing the shooting test data, alternative hypothesis(The vertical deviations are less than the reference value) was adopted as the result of analyzing data using t-test. And the values of data through tool(PRODAS) and standard trajectory equation meet requirements of estimated ballistic match respectively. In conclusion, the level of ballistic match of 5.56 mm copper bullets meets the estimated reference level through regression analysis at 4 points.

• Current Optics and Photonics
• /
• v.6 no.3
• /
• pp.313-322
• /
• 2022

Remote-sensing optical payloads, especially hyperspectral imagers, have particular issues with stray light because they often encounter high-contrast target/background conditions, such as sun glint. While developing an optical payload, we usually apply several stray-light analysis methods, including forward and backward analyses, separately or in combination, to support lens design and optomechanical design. In addition, we often characterize the stray-light response over a full field to support calibration, or when developing an algorithm to correct stray-light errors. For this purpose, we usually use forward analysis across the entire field, but this requires a tremendous amount of computational time. In this paper, we propose a sequence of forward-backward-forward analyses to more effectively investigate the through-field response of stray light, utilizing the combined advantages of the individual methods. The application is an airborne hyperspectral imager for creating hyperspectral maps from 900 to 1700 nm in a 5-nm-continuous band. With the proposed method, we have investigated the through-field response of stray light to an effective accuracy of 0.1°, while reducing computation time to 1/17^th of that for a conventional, forward-only stray-light analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.517-524
• /
• 2020

In line with the recent wave of the 4th Industrial Revolution, the environment for defense R&D is transforming into a center of high-tech military technology. In particular, developed countries are strengthening control of technology exports and technology transfer to protect advanced defense science and technology. For this reason, the budget demand for securing the ability to develop independently high-tech weapons and core technologies suitable for the future battlefield environment is increasing, and increasing efficiency in R&D investment has been highlighted for efficient distribution of limited budgets. This study examined the efficiency of the defense basic R&D project using the non-parametric approach, DEA. The R&D budget, R&D researcher, and R&D period were selected as the input variables, and the number of papers and patents were used as output variables. The efficiency of basic R&D projects was analyzed through CCR, BCC models, and SE. Lastly, based on the efficiency measurements, the cause of the inefficiency of R&D projects was suggested, and ways to improve efficiency were suggested. This study is expected to be used as useful information that can be applied to project performance management through efficiency analysis of basic defense R&D projects and be reflected in the project planning stage through feedback.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3204-3209
• /
• 2010

This paper suggested the future technologies of biometrics system by using Delphi method. The level of technology were also evaluated. The group for the Delphi analysis consisted of 30 experts involved in biometrics. This study also suggested the 10 future core technologies of biometrics system including Body-signal DB technology and Bio-signal analysis technology, etc. From the technological importance point of view, several technologies were suggested as critical ones including the manufacturing technology of semiconductor micro-sensor and bio-sensor, etc. This research also forecasted the realization time of each technology and gave shape the detail goal performances. This research will be able to contribute to deciding the priority order and setting the direction of biometrics R&D planning.

• Journal of Advanced Navigation Technology
• /
• v.21 no.4
• /
• pp.339-346
• /
• 2017

We propose the design of an INS simulated equipment to evaluate the enhanced jamming resistance of an INS-aided GPS receiver with INS, when a jamming signal is injected into a simulated high dynamic platform. We propose the design of a relative cheap INS simulated equipment, instead of an expensive INS simulator connected to GPS simulators. Based on the design, we implement the equipment and setup high dynamic test environment using the equipment to evaluate an INS-aided GPS receiver. In the GPS L1 C/A and L2C simulations that inject jamming signals of the narrow and wide bandwidth into the GPS receiver with and without INS-aided algorithm, we obtain increased jamming resistance performance as +5 dB compared with the GPS receiver without INS-aided algorithm in all kinds of jamming bandwidth. Based on the simulations, we verified that the INS simulated equipment can be used to evaluate the enhanced jamming resistance of INS-aided GPS receivers.

• Journal of Information Technology Services
• /
• v.20 no.1
• /
• pp.29-40
• /
• 2021

North Korea's science and technology policies are being pursued under strong leadership and control by the central government. In particular, a large part of the research and development of science and technology related to the Fourth Industrial Revolution in North Korea is controlled and absorbed by the defense organizations under the national defense-oriented policy framework, among which North Korea is making national efforts to develop advanced technologies in artificial intelligence and actively utilize them in the military affairs. The future weapon system based on AI will have superior performance and destructive power that is different from modern weapons systems, which is likely to change the paradigm of the future battlefield, so a thorough analysis and prediction of the level of AI militarization technology, the direction of development, and AI-based weapons system in North Korea is needed. In addition, research and development of South Korea's corresponding weapon systems and military science and technology are strongly required as soon as possible. Therefore, in this paper, we will analyze the level of AI technology, the direction of AI militarization, and the AI-based weapons system in North Korea, and discuss the AI military technology and corresponding weapon systems that South Korea military must research and develop to counter the North Korea's. The next study will discuss the analysis of AI militarization technologies not only in North Korea but also in neighboring countries in Northeast Asia such as China and Russia, as well as AI weapon systems by battlefield function, detailed core technologies, and research and development measures.

• Journal of Technology Innovation
• /
• v.20 no.3
• /
• pp.93-128
• /
• 2012

Defense technology planning identifies medium-and long-term core technologies to accomplish future defense goals and suggests strategies for future R&D. In order to promote the export-oriented defense industry, planning paradigms should be shifted from technology-oriented planning that focuses on weapon systems to market- oriented R&D planning. This study aims to strategically support 'preliminary technology planning' the Defense Agency for Technology and Quality is pushing ahead with. Through market-orientation analysis models of weapon systems based on defense R&D planning, data research on previous market-oriented research, and the analyses and examples of global defence markets, it evaluates market attractiveness to UAVs and drew methods for exploring markets and enhancing competitiveness of military equipment. The market-oriented analysis model of weapon systems is considered to be a helpful reference as a relevant factor for decision making on establishing and verifying requirement planning. In particular, if a market-oriented defense R&D planning process is established institutionally, it will enable us to make export strategies tailored to different equipment from the planning phase and to support marketing strategically.