The fisheries resources control system in the Fisheries Act of Korea is introducing technical management method and input control method that controls fishing effort. Fishing effort control system of Korea aiming at realizing the maximum sustainable yield does not regulating the limitation of fishing quota and the limitation of fisheries object target fish. Therefore fishing operators who have fishing permit can use fishery resources without any restriction of fishing quota. But there are no rules that can controlling capacity of productivity of fishing by developing of fishing technic and fishing gear. For those reasons, productivity of fishing is superior to reproductivity of fisheries resources. Therefore, the Fisheries Act of Korea rearranges a legal basis for an introduction of fisheries resources management system by TAC, but the contents to be possible for a legal guarantee is not included and it is exceedingly defective as abstract and institutional devices. And that the affairs to be required for an enforcement of the said regime was placed in an administrative mandatory legislation and the danger to be degenerated is high in accordance with the bureaucratic self-righteous and/or the coercion of group's interest concerned and accordingly its substitute legislation system is keenly required. TAC system that is going to be introduced in our country is expected to enforce the Olympic fishing method and the individual quota method in parallel. This method is not certainly proper, because it occurs to overcapitalize and to compete fishing amounts between fishery operators. So as to prevent overcapitalization and fishing competition between fishery operators, and the exhaustion of coastal fisheries resources, individual transferable quota system should be introduced in Korean sea. Accordingly this thesis has attempted to constitute a view to improving problems of the traditional fisheries resources control system and introducing TAC fisheries resources control system.
As the global uncertainty of manufacturing has increased and the quality problem has become global, the recall has become a fatal risk that determines the durability of the company. In addition, as the convergence of PSS (product-service system) product becomes common due to the development of IT convergence technology, if the function of any part of hardware or software does not operate normally, there will be a problem in the entire function of PSS product. In order to manage the quality of such PSS products in a stable manner, a new approaches is needed to analyze and manage the hardware and software parts at the same time. However, the Fishbone diagram, FTA, and FMEA, which are widely used to interpret the current quality problem, are not suitable for analyzing the quality problem by considering the hardware and software at the same time. In this paper, a quality risk assessment model combining FTA and FMEA based on defect rate to be assessed daily on site to manage quality and fishbone diagram used in group activity to solve defective problem. The proposed FTA-FMEA based risk assessment model considers the system structure characteristics of the defect factors in terms of the relationship between hardware and software, and further recognizes and manages them as risk. In order to evaluate the proposed model, we applied the functions of ITS (intelligent transportation system). It is expected that the proposed model will be more effective in assessing quality risks of PSS products because it evaluates the structural characteristics of products and causes of defects considering hardware and software together.
Purpose: For improving outgoing quality, this study presents a novel sampling framework based on predictive analytics. Methods: The proposed framework is composed of three steps. The first step is the variable selection. The knowledge-based and data-driven approaches are employed to select important variables. The second step is the model learning. In this step, we consider the supervised classification methods, the anomaly detection methods, and the rule-based methods. The applying model is the third step. This step includes the all processes to be enabled on real-time prediction. Each prediction model classifies a product as a target sample or random sample. Thereafter intensive quality inspections are executed on the specified target samples. Results: The inspection data of three Samsung products (mobile, TV, refrigerator) are used to check functional defects in the product by utilizing the proposed method. The results demonstrate that using target sampling is more effective and efficient than random sampling. Conclusion: The results of this paper show that the proposed method can efficiently detect products that have the possibilities of user's defect in the lot. Additionally our study can guide practitioners on how to easily detect defective products using stratified sampling
모바일 앱 시장은 스마트폰의 등장으로 폭발적으로 성장하였다. 최근 모바일 앱은 단순한 스마트폰 구성요소가 아니라 다양한 마케팅 채널로 활용되고 있으며 스타트업이 성장할 수 있는 발판이 되었다. 본 연구에서는 모바일 앱이 시장에 미치는 영향에 대해서 연구하고자 하였다. 안내원과의 전화를 통해서 소비자에게 서비스를 제공하던 전통적인 콜택시 산업이 카카오택시라는 새로운 모바일 앱 채널의 진입을 통해서 어떠한 영향을 받고 있는지 살펴보고자 한다. 최근 자가용과 대중교통의 발전으로 택시 수요는 감소한 반면, 개인택시 증가 등으로 택시 공급은 증가하고 있다. 택시산업은 크게 일반택시와 콜택시로 나누어진다. 일반택시는 택시기사가 직접 고객을 찾아다니기 때문에 우연적이고 비효율적인 행태를 보인다. 하지만 콜택시는 고객이 사용의도를 가지고 택시를 찾는다는 점에서 더 효율적인 업무가 가능하다. 이러한 장점에도 불구하고 콜택시 시장은 불완전한 고객-택시기사 매칭 시스템과 택시기사 관리 부족으로 크게 성장하지 못하였다. DID(differences in differences)는 하나의 시간 흐름에서 발생한 특정한 사건이 유의한 영향력을 행사하는가를 밝히는 계량경제학의 연구 방법이다. 본 연구에서는 DID를 사용하여 최근 큰 이슈와 함께 출시 된 다음의 카카오택시 어플리케이션이 기존의 콜택시 사업에 미치는 영향력을 밝히고자 하였다. 거기서 더 나아가 비윤리적인 행태로 여겨지는 대기업의 문어발식 산업 확장이 해당 시장에 어떠한 영향을 미치는지 알아보고자 하였다. 이를 위해 카카오택시 전후 콜택시 산업의 크기 비교를 통해서 콜택시 시장 변화를 확인하였다. 본 연구를 위해 2014년 8월부터 2015년 7월까지 1년치의 콜택시 수요 데이터를 수집하였으며 control group으로 사용한 대리운전 수요 데이터도 같은 기간 동안 수집하였다.
This study was done to provide basic information about the storage and distribution of specialty grade coffee of which the market will be expanded through customer sensory evaluation according to the storage period of specialty grade coffee by the SCAA classified method with consideration to defective beans and scent. The specialty grade coffee sample of this study was extracted on day 1, day 14, and day 28. The water content showed a significant reduction on the 28th storage day and there was no pH change according to the storage period. Color degree was brightened according to the preservation period before and after grinding but there was no significant difference. The panels for sensory evaluation considered of 24 university. The sensory evaluation consist of aroma, bitterness, and astringency, acidity, aftertaste, overall satisfaction, and items for strength estimation consist of aroma, acidity and bitterness. The sensory evaluation was expressed by applying a 5 point Likert scale. The results showed that as the storage period increased so too did the aroma and the strength of bitterness. Preference was the highest on day 1 in every items except aroma and astrigency. However on day 14 and day 28, most of the sensory evaluation became low and then became high, which was inconsistent. Male students were not consistent in their evaluation according to the preservation period, but female students rated aroma and bitterness the lowest on preservation period day 1 and they prefer after a storage period of 1 day in regards to the entire degree of satisfaction including sour test. astrigency and aftertaste. The analysis of visiting frequency for coffee shops used demonstrated that the longer the preservation period, the lower the preference but was not significant in the case of involving a little frequency group. The group that did not like Americano coffee evaluated that the longer the preservation period, the lower the preference based on Americano coffee preference analysis. There was no consistency between the storage period day 14 and day 28 in strength and preference, but preference for storage period day 1 was high in every group, which means that the quality of coffee is affected by the preservation period.
소아기의 만성 육아종성 질환은 탐식세포의 선천적인 장애로 탐식된 세균이나 진균류를 살상하는 기능이 상실되고 따라서 반복적으로 화농성 질환이 재발하는 병이다. 폐는 만성 육아종성 질환에서 가장 흔히 침범되는 장기이며 폐감염은 이 질환에 의한 사망률의 약 절반을 차지한다. 만성 육아종성 질환에서 수술적 치료는 그 역할이 아직 명확하게 알려져 있지 않지만 폐감염의 원인 균에 대한 빠르고 정확한 진단이 적절한 항생제 선택에 매우 중요하기 때문에 폐엽절제술과 같은 수술적 접근법이 정확하고 빠른 진단을 통해 환자회복을 더 빠르게 하고 항생제의 침투를 더 쉽게 하여 환자에게 도움을 준다. 본 환아는 1개월된 남자환아로 만성 육아종성 질환으로 인한 폐감염으로 좌하엽절제술과 수술후 항생제, 항진균제와 면역글로불린, Interferon-gamma를 투여 받고 감염조절이 되었고 퇴원후 외래 추적관찰중이다.
The following study was done to investigate foodservice management practice. Total subjects were 18 foodservices in social welfare facilities in Seoul. Among studied facilities, nine were the welfare facilities for children, five were the welfare facilities for elderly, two were the welfare facilities for a mentally and physically disabled person and the remaining two were vagabond care facilities. Methods used were mainly questionaires. These questionaires were answered by manager and interviews were also done for a same person. Equipments were evaluated by investigators using the evaluation form. The results of the study were summarized as follows. Number of cooks and assistant cooks among employee in foodservice establishment were about 2-6 persons. One dietitian is stationed in 2 places among 18 places. Food purchasing and menu plannings were mainly practiced by manager, secretary and other personnels, in more than 50% of social welfare facilities. The type of the menu in most facilities was the set menu. The period of turn over for cycle menu was a week in 50% of facilities. Seventy seven point eight percentage of the welfare facilities were used the weekly or monthly cycle. For the food preparation, there was almost no place using standard recipes. Foodstuffs were purchased in local market. Moreover, the preference test of served foods were done for residence of each facilities. But it was not applicated effectively. Conditions of most equipments in the kitchen were defective specially in dishwashing and sterilization step.
The purpose of this thesis lies on building the foundation for the further activation of trade among the Northeast Asian countries such as South Korea, Japan, China, Russia, and North Korea through an analytical comparison of their arbitration systems. Further activation of trade cannot be reached without previously building safety measures on the negotiation of exports, the control on defective imported merchandise, the returns on investments, and the stable management of businesses. Throughout this thesis an analytical comparison of these five countries' most important areas on arbitration will be carried out. These areas are the arbitration laws and organizations; the structures of the laws; scope of arbitration; form of arbitration agreement, appointment of arbitratiors, place of arbitration, hearing, court assistance in taking evidence, governing law, decision making by panel of arbitrators, form and contents of awards, effective of award, recourse against award, recognition and enforcement of awards. etc. It was found in each of the areas cases to be identical, similar or verydifferent; also, cases unable to arbitrate. This phenomenon was found to occur due to the differences in political and economic systems and perception of arbitration among these countries. Additionally, this thesis points out what should each country do for its integration. It is also suggested the organization of a common arbitration research body to continue the efforts for raising the awareness, building trust, and mutual recognition among the countries to ultimately create a common arbitration system. Lastly, it is a personal will that this thesis will serve as the starting point for in depth researches in each of the presented areas.
Since water leakage and cracks are not the source of serious problems such as long-term lowering of performance and durability of a stricture, including damages to operating facilities of a structure, damages to internal finishing materials, exhibition, and goods, and pollution of residential environment, they might have led to development of positive coping skills; however, an instant loss of lives or property due to earthquake, explosion, typhoon, or a fire was indeed neglected. In these days, repair materials for leakage cannot help but being taken in temporary way without any noticeable countermeasure. This kind of repair is socially criticized many times that is defective construction even if this costs a lot. It was not arrange the standard for construction methods of sealer of injection type for leakage maintenance, even it has been used various type of construction methods for leakage part. In conclusion, we suggest that the construction methods of sealer of injection type for leakage maintenance for leakage to establish the leakage repairing technology as increase of structure demand. Therefore, it would be possible to provide a stage-by-stage solution by developing systematic research activities among the industry, schools, and research institutes to spread maintenance management techniques globally through technical solution to water leakage and cracks, acquisition of structural safety with prolonged durability for life cycle, reduction of water leakage repair expense s, and so on.
Measurements of the automobile manufacturers are available anywhere and anytime, directly based on the criterion of failure is measured. The maintenance of high-precision production activities is direct evidence of the fact that competitive manufacturing activities are very important in determining the success of companies to recall defective starting from raw material costs. The current manufacturing sites produce calipers and clearance gauge the degree of tool only specific. Therefore, judging the quality, including the number of errors, requires a lot of attention to the dimension failures in day-to-day measurements and measurement tasks and duties repeated in difficult situations. In this paper, we aim to develop a vehicle manufacturing plant site using each of the manufacturing processes while operating a measurement tool. We display it using the Image Processing PC-based S/W with all those visual facts by management and recorded as image information a more accurate and current situation to obtain information and share visual measurements. We carry out research on the design and development vision inspection algorithm applied for pattern-recognition techniques that can help manufacturing site quality control.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.