• 의정연구
• /
• 제25권2호
• /
• pp.69-101
• /
• 2019

본 연구는 정당의 경선을 거쳐 당선된 국회의원들이 그렇지 않은 의원들에 비하여 당론으로부터 이탈하는 경향성이 더 강하게 나타나는지 검증하는 것에 목적이 있다. 이를 위하여 제20대 국회 본회의 표결을 중심으로 의원들의 당론이탈 투표 경향성을 분석하였다. 분석 결과, 경선을 통해 당선된 지역구 의원들이 당내 지명이나 전략 공천 방식으로 당선된 의원들에 비하여 당론으로부터 더 이탈하는 경향이 나타났다. 이러한 결과는 정당의 상향식 공천 방식의 도입이 확대될 경우 정당의 표결 응집력을 약화시키거나 의원의 입법 자율성을 강화하는 데 기여할 수 있음을 시사한다.

• 한국물환경학회지
• /
• 제24권4호
• /
• pp.423-429
• /
• 2008

Microfiltration (MF) and ultrafiltration (UF) processes for removal of particulate materials (i.e., turbidity, microorganisms and viruses) have been used to produce drinking water with higher quality. As membrane filtration technique has become widely applied for drinking water treatment, the importance of membrane integrity test (MIT) has also been increasingly emphasized. The results of pressure decay test (PDT) were presented in the paper to monitor membrane integrity. In this paper the PDT was carried out with deliberately-defected membrane fibers to evaluate the sensitivity of PDT on membrane fiber damage. Variation of pressure decay rate and removal rate were investigated to evaluate the impact of defection (defection ratio) and pore size of membrane. The membrane integrity could be successfully monitored by the PDT. The pressure decay rate varied from $0.002{\sim}0.189kg_f/cm^2hr$ with the initial pressure ranged from 0.2 to $1.0kg_f/cm^2hr$. Higher initial pressure which provided with higher pressure decay rate was preferred to evaluate the defection of membrane fiber. As for the particle removal rate, the Log Removal Rate (LRV) of kaolin solution decreased significantly from 3.78 to 2.31 when one fiber out of 3,200 fibers was cut. The membranes with different pore size were tested to evaluate virus removal efficiency. The virus removal rate of the MF membrane ($0.1{\mu}m$) was about 30% although the poliovirus was smaller than the pore size of the MF membrane, indicating that the removal rate was much lower than Korea Water Works Association (KWWA) certificate LRV of 1.5.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.181-183
• /
• 2004

In this paper, We proposed an algorithm which extraction iris region from 2D image. Our method is composed of three parts : internal boundary defection and external boundary detection. Since eyelid and eyelash cover part of the boundary and the size of iris changes continuously, it is difficult to extract iris region accurately. For the interior and exterior boundary detection, we used partial differentiation of histogram. Performance of the proposed algorithm is tested and evaluated using 360 iris image samples.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.699-706
• /
• 2001

Waterproofing materials should be expected to last the life of the structure. An approximate life cycle cost should be to compare different materials based on initial and periodic repair / maintenance costs. Waterproofing applicators like materials that are easy to set up and clean up. The designer should choose a material that can be applied in almost all conditions. Design Professionals should specify independent inspection on critical jobs or in all cases where the budget permits. The basic causes of defection occurred during construction should be minimized.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.276-280
• /
• 1993

An articulated, multifinger mechanical hand can carry out grasping and manipulation operations on objects of different type and shape. In this paper the architecture of the mechanical hand is presented. Joints are driven by two antagonist tendons. Strain gauges are used to derive tendon tensions, and located in the palm of the hand. Angular defection of the joints is measured by Hall effect sensors attached to the joints. A multiprocessor-based architecture for controlling the hand is illustrated.

• 한국공작기계학회논문집
• /
• 제11권5호
• /
• pp.93-99
• /
• 2002

In general, manufacturing error is originated from bad material, machine tool defection and tool breakage. When the manufacturing process is stable, the most of error come from the tool wear. In common on-machine measurement teaching probe and touch sensor are widely used however in this paper the electric touch point type automatic tool compensation system is developed the performance of it is validated and effective operating is proposed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.760-763
• /
• 2003

This study proposed the analysis of damage defection due to the change of the stiffness of structure by using the original and modified dynamic characteristics. The method is applied to examples of a cantilever and 3 degree of freedom by modifying the stiffness. The predicted damage detections are in good agreement with these from the structural reanalysis using the modified stiffness.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.813-814
• /
• 2008

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.402-402
• /
• 2000

MFL(Magnetic Flux Leakage) methods are used extensively for inspection of ferromagnetic materials. As an example, pipelines that are buried underground are inspected using MFL methods. By the MFL methods, ferromagnetic pipelines are magnetized by a permanent magnet or an electromagnet and then flux leakage is detected at the defection position. In this paper, we perform modeling of the magnetized pipelines. Also we propose the method localization of th defected areas. The effectiveness of the proposed method is verified experimentally.

• 반도체디스플레이기술학회지
• /
• 제2권4호
• /
• pp.1-7
• /
• 2003

In this paper, we design the pattern generator circuits using PLDs(Programmable Logic Devices). The pattern generator is the circuit which generates the test pattern signal for the inspection of logical defects of semiconductor products. The proposed circuits are designed by the PLD design tool(MAX+ II of ALTERA). Also the designed circuits are simulated for the verification of the designed ones. The simulation results have a good performance.