• Journal of information and communication convergence engineering
• /
• 제9권2호
• /
• pp.150-154
• /
• 2011

In this paper a four-pole elliptic function bandpass filter is designed with two ground slots. A research of microstrip bandpass filters (BPF) using defected ground structures (DGS) is presented. DGS technique allows designs of tight couplings without the necessity of using very narrow coupling gaps. The simulator Sonnet is used to design the resonator and to calculate the coupling coefficient of the basic coupling structure. Compared to similar microstrip filters without defected ground structure, the simulated performances of these novel structures indicate some technological advantages.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2242-2246
• /
• 2009

In this paper, a homogeneous dual composite right/left-handed (D-CRLH) transmission line (TL) is proposed by using a defected ground structure (DGS) on the ground plane. In order to satisfy a homogeneity condition of metamaterial, a subwavelength unit cell is designed by way of a spiral DGS and a meander stub. From a dispersion diagram, it is expected that the frequency bands for the left-handed (LH) property is 3.5 - 4.4 GHz. At 3.8 GHz in the LH band, backward propagating phenomenon is observed from full-wave analysis. The experimental results show that the proposed TL has a stop-band in 1.75 - 3.6 GHz.

• 한국전자파학회논문지
• /
• 제16권10호
• /
• pp.1003-1009
• /
• 2005

본 논문에서는 결함접지구조(Defected Ground Structure: DGS)의 전파 지연 특성을 이용하여 소형으로 구현한 휴대 인터넷용 고전력 Single Pole Double Throw(SPDT) 스위치의 특성이 제공되며 1/4 파장 전송선을 이용하여 제작된 일반적인 방식의 스위치와 그 특성이 비교된다. DGS를 활용하여 제작된 스위치는 높은 격리도를 확보하기 위해 병렬구조의 다이오드를 사용하여 구성되었으며 2.3 GHz에서 0.8 dB의 삽입 손실과 50 dB 이상의 격리도 특성을 보였고 50 W 이상의 전력을 다룰 수 있었다. DGS를 활용한 스위치는 기존의 전송선 방식의 스위치와 거의 동일한 스위칭 특성을 보이면서도 $50\%$ 가까운 회로의 크기 감소를 달성할 수 있었다.

• 한국전자파학회논문지
• /
• 제17권8호
• /
• pp.725-731
• /
• 2006

Feedforward와 defected ground structure(DGS)를 이용한 새로운 주파수 체배기를 제안하였다. 제한된 주파수 체배기는 feedforward 구조에 의해 기본 주파수$(f_0)$가 제거되고, 아령 또는 나선형 모양의 DGS 구조에 의해 2차, 3차 또는 4차의 원하지 않는 고조파 성분들을 제거할 수 있었다. 결국 feedforward와 DGS 구조에 의해서 체배하고자 하는 성분을 제외한 나머지 고조파들이 제거되었다. 기본 주파수를 1 GHz로 하여 주파수 체배기를 설계하고, 측정하였다. 입력 전력을 0dBm으로 하였을 때 2체배기, 3체배기와 4체배기의 출력 전력은 각각 -2.59 dBm, -5.36 dBm과 -4.57 dBm이었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.367-370
• /
• 2010

In this paper a four-pole elliptic function bandpass filter is designed with two ground slots. A research of microstrip bandpass filters (BPF) using defected ground structures (DGS) is presented. DGS technique allows designs of tight couplings without the necessity of using very narrow coupling gaps. The simulator Sonnet is used to design the resonator and to calculate the coupling coefficient of the basic coupling structure. Compared to similar microstrip filters without defected ground structure, the simulated performances of these novel structures indicate some technological advantages.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.380-383
• /
• 2003

In this paper, we analyzed the characteristics of a modified DGS(Defected Ground Ground Structure)and extracted the equivalent citcuit of that. The proposed DGS is the structure that connects two DGS units, which are composed of the defects on the metallic ground plane and the gab on the signal line. The gab on the signal line was adopted to induce series capacitor of band pass filter. Also, to confirm the validity of the proposed structure, we designed and implemented C - Band pass filter by using the modified DGS.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권3호
• /
• pp.132-138
• /
• 2005

In this paper a DPDT(Double-Pole Double Through) switch with defected ground structure(DGS) is proposed. The equivalent circuit for the proposed switch structure is derived according to based on equivalent circuit of proposed DGS unit structure. The equivalent circuit parameters of DGS unit are extracted by using the circuit analysis method. The on/off operation of the proposed switch is obtained by varying the capacitance of the varactor diode at the defected ground plane. In the case of ON state, the insertion loss of the fabricated DPDT was shown under 1dB. And in OFF state, we found the rejection characteristic over 20dB at the designed frequency 2.45GHz. The experimental results show excellent insertion loss at on state and isolation at off state.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.59-62
• /
• 2002

In this paper, low-pass filters using DGS-CPW cell are suggested. The bandwidth of stopband is extended up to 3 times of cutoff frequency. The novel DGS-CPW cell reduces the size of the circuit. This structure can be used in microwave and milimeter-wave circuits.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.343-346
• /
• 2003

A new structure to design low pass filters (LPFs) is presented rho proposed structure has the etched shape of Quad-Spiral DGS(Defected Ground Structure) on microstrip transmission lines. By extracting the equivalent circuit elements of unit Quad-Spiral DGS, LPFs are designed easily. The equivalent circuit of Quad-Spiral DGS consists of a step impedance resonator and lumped elements. The proposed LPF provided steep rejection characteristics with 5-poles. Experimental results show excellent agreements with circuit simulation results in wide band and the validity of our circuit modeling for LPF design. The result shows another possibility of Quad Spiral DGS for microwave devices.

• Journal of electromagnetic engineering and science
• /
• 제3권2호
• /
• pp.118-125
• /
• 2003

This paper presents a 5.8-㎓ oscillator that uses a novel defected ground structure(DGS), which is etched on the metallic ground plane. As the suggested defected ground structure is the structure for mounting an active device, it is the roles of a feedback loop inducing a negative resistance as well as a frequency-selective circuit. Applying the feedback loop between the drain and the gate of a FET device produces precise phase conversion in the feedback loop. The equivalent circuit parameters of the DGS are extracted by using a three-dimensional EM simulation ,md simple circuit analysis method. In order to demonstrate a new DGS oscillator, we designed the oscillator at 5.8-㎓. The experimental results show 4.17 ㏈m output power with over 22 % dc-to-RF power efficiency and - 85.8 ㏈c/Hz phase noise at 100 KHz offset from the fundamental carrier at 5.81 ㎓.