• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.9
• /
• pp.1297-1301
• /
• 2013

This paper analyzes of PD occurrence position through an analysis of the arrival time difference between the GIS partial discharge signal. Because of GIS (Gas Insulated Switchgear) is a facility very important power equipment and as part of the equipment that make up the power system, the stabilization of the power industry, which accounted for 88.5% share of GIS substation in the form of a substation is an important equipment for power supply. In the situation where we are gradually expanding the need for preventive diagnosis in order to improve the efficiency of equipment management and failure prevention for Preventive diagnosis. In this paper as a method for extracting pre-defect of failure of GIS Apply the average value method of calculating the 5 times each using a pulse of the first time of the second pulse (${\Delta}t$) with an oscilloscope generation position PD(Partial Discharge). the results of GIS internal inspection, the partial discharge of the actual the position of the partial discharge was confirmed with an accuracy of about 82% of positions. Arrival time difference in the most effective manner if the partial discharge of GIS internal occurs by applying the averaging method and TOA(Time of arrival) method, the partial discharge occurs you through the measurement and analysis of PD signal occurs was confirmed in the experiment are presented and diagnostic methods location tracking.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.121-133
• /
• 2013

Defect-free transfer service on the Next-generation wireless network extensive roaming mobile node (MN) to provide efficient mobility management has become very important. MIPv6(Mobility IPv6) is one of mobility management scheme proposed by IETF(Internet Engineering Task Force), and IPv6-based mobility management techniques have been developed in various forms. One of each management techniques, IPv6-based mobility management techniques for PMIPv6 (MIPv6) system to improve the performance of a variety of F-PMIPv6 (Fast Handover for Proxy MIPv6) is proposed. However, the F-PMIPv6 is cannot be excellent than PMIPv6 in all scenarios. Therefor, to select a proper mobility management scheme between PMIPv6 and F-PMIPv6 becomes an interesting issue, for its potenrials in enhancing the capacity and scalability of the system. In this paper, we develop an analytical model to analyze the applicability of PMIPv6 and F-PMIPv6. Based on this model, we design an Secure Smart Mobility Support(SSM) scheme that selects the better alternative between PMIPv6 and F-PMIPv6 for a user according to its changing mobility and service characteristics. When F-PMIPv6 is adopted, SSM chooses the best mobility anchor point and regional size to optimize the system performance. Numerical results illustrate the impact of some key parameters on the applicability of PMIPv6 and F-PMIPv6. Finally, SSM has proven even better result than PMIPv6 and F-PMIPv6.

• Convergence Security Journal
• /
• v.12 no.5
• /
• pp.71-77
• /
• 2012

Expenses in the form of personnel expenses in the past, in modern times, machine guards to gradually transition has been. This is because the machine guard is more efficient than personnel expenses. But due to false alarms, despite the high expectations of the effects of electronic security in the operation of the electronic security system due to factors that hinder the development of machine guards growth slows. Defect removal aspects of this paper, using IPA (Importance Performance Analysis) techniques to study the operation of electronic security systems and its importance in the development of machine guards, look at how high the technical aspects of electronic security systems composite type of malfunction to minimize crime sensor are presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.680-687
• /
• 2016

Although advanced weapon system weapons with high-performance and various functions have been developed, weapon defects can be fatal in the weapons industry. Therefore, the army requires quality improvement to reduce the number of defects which occur during both the development and operation of the weapon system. Recently, many manufacturers, including weapons manufacturers, have conducted analyses using defect related big-data in order to improve the quality. However, there have been few data analyses, because it is difficult to obtain the data required for the analysis of the development phase. Therefore, this study summarizes the pattern of the weapon system, military organization, and defect types using the actual data of the Post-Logistics Support (PLS) phase. The PLS data, which is referred to as the data collected after force integration, includes information on requests for maintenance. Through this information, this study selects key variables and analyzes the selected variables. The analysis results show the critical factors to be considered during the development phase. Finally, this study proposes a framework for advanced PLS systems using the PLS data. The proposed framework enables the development time of weapon systems to be further shortened and their quality to be improved.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.5
• /
• pp.343-360
• /
• 2000

The information technology(IT) development of telecommunication, along with the informationalization over the world, enables the firms to process their inner and outer operations through Electronic Data Interchange (EDI) system. And the concept of logistics has become more important to the enterprises in strategic sense because it had aggrandized itself to more comprehensive and integrative concept. Also the world shipping market is more competitive than any other market. In these environment, to maintain competitve power, shipping firms process operations by Logistics Information system(LIS), And then, reduce the working processes, working time and its costs. So the LIS has become more important in developing our national logistics system and industry. Therefore, this study purposes on empirically analyzing the activation factors of shipping LIS and the relationship these factors with logistic performances in the shipping industry. Considering environments of Shipping logistics information system, this study sets up the research model and hypothesis to examine the activation factors of shipping LIS and the relationship these factors with logistic performances. We used the field data on the 163 numbers of firms(29 overseas shipping companies and 133 forwarding Agency) to get the empirical evidence. According to the study results, The shipping LIS activation factors which the sample firms recognized as important: were top manager's support, well structured communication channel, strategic plan's connection and inner informationalization level. And IS organization ＆ human resources, IS discipline ＆ training, software development, IS organizational alignment, database management system, information standardization, competitive advantage, financial support and government support represent partially significant. Also, the current shipping LIS's main problems are expensive system cost, standardization of working process's, institution's imperfection and system's interaction defect. So these problems must be improved to activate shipping LIS.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.1
• /
• pp.1-7
• /
• 2019

In the modern industrial period, the introduction of mass production was most important progress in civilization. Die-casting process is one of main methods for mass production in the modern industry. The aluminum die-casting in the mold filling process is very complicated where flow momentum is the high velocity of the liquid metal. Actually, it is almost impossible in complex parts exactly to figure the mold filling performance out with the experimental knowledge. The aluminum die-castings are important processes in the automotive industry to produce the lightweight automobile bodies. Due to this condition, the simulation is going to be more critical role in the design procedure. Simulation can give the best solution of a casting system and also enhance the casting quality. The cost and time savings of the casting layout design are the most advantage of Computer Aided Engineering (CAE). Generally, the relations of casting conditions such as injection system, gate system, and cooling system should be considered when designing the casting layout. Due to the various relative matters of the above conditions, product defects such as defect extent and location are significantly difference. In this research by using the simulation software (AnyCasting), CAE simulation was conducted with three layout designs to find out the best alternative for the casting layout design of an automotive Oil Pan_BJ3E. In order to apply the simulation results into the production die-casting mold, they were analyzed and compared carefully. Internal porosities which are caused by air entrapments during the filling process were predicted and also the results of three models were compared with the modifications of the gate system and overflows. Internal porosities which are occurred during the solidification process are predicted with the solidification analysis. And also the results of the modified gate system are compared.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.2
• /
• pp.159-172
• /
• 2001

The information technology(IT) development of telecommunication, along with the information analyzation over the world, enables the firms to process their inner and outer operations through Electronic Data Interchange (EDI) system. And the concept of logistics has become more important to the enterprises in strategic sense because it had aggrandized itself to more comprehensive and integrative concept. Also the world shipping market is more competitive than any other market. In these environment, to maintain competitive power, shipping firms process operations by Logistics Information system(LIS), And then, reduce the working processes, working time and its costs. So the LIS has become more important in developing our national logistics system and industry. Therefore, this study purposes on empirically analyzing the activation factors of shipping LIS and the relationship these, factors with logistic performances in the shipping industry. Considering environments of Shipping logistics information system, this study sets up the research model and hypothesis to examine the activation factors of shipping LIS and the relationship these factors with logistic performances. We used the field data on the 163 numbers of firms(29 overseas shipping companies and 133 forwarding Agency) to get the empirical evidence. According to the study results, The shipping LIS activation factors which the sample firms recognized as important: were top managers support, well structured communication channel, strategic plans connection and inner information analyzation level. And IS organization & human resources, IS discipline & training, software development, IS organizational alignment, database management system, information standardization, competitive advantage, financial support and government support represent partially significant. Also, the current shipping LISs main problems are expensive system cost, standardization of working processs, institutions imperfection and systems interaction defect. So these problems must be improved to activate shipping LIS.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.3
• /
• pp.78-85
• /
• 2021

Recently a traffic accident of heavy duty vehicles under the mandatory installation of ADAS (Advanced Driver Assistance System) is often reported in the media. Heavy duty vehicle accidents are normally occurring a high number of passenger's injury. According to report of Insurance Institute for Highway Safety, FCW (Forward Collision Warning) and AEB (Automatic Emergency Braking) were associated with a statistically significant 12% reduction in the rate of police-reportable crashes per vehicle miles traveled, and a significant 41% reduction in the rear-end crash rate of large trucks. Also many countries around the world, including Korea, are studying the effects of ADAS installation on accident reduction. Traffic accident statistics of passenger vehicle for business purpose in TMACS (Traffic safety information Management Complex System in Korea) tends to remarkably reduce the number of deaths due to the accident (2017(211), 2018(170), 2019(139)), but the number of traffic accidents (2017(8,939), 2018(9,181), 2019(10,095)) increases. In this paper, it is introduced a traffic accident case that could lead to high injury traffic accidents by being equipped with AEB in a bus. AEB reduces accidents and damage in general but malfunction of AEB could occur severe accident. Therefore, proper education is required to use AEB system, simply instead of focusing on developing and installing AEB to prevent traffic accidents. Traffic accident of AEB equipped vehicle may arise a new dispute between a driver's fault and vehicle defect. It is highly recommended to regulate an advanced event data recorder system.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.531-534
• /
• 2002

Complexity in construction projects has increased over the years, which has led to an increase in the number of organizations involved in those projects. In today's environment, these organizations operate in different parts of the world requiring their personnel to be geographically distributed. So, these organizations construct and utilize the information systems. However, looking into this systems' content, those use two-dimensional planes such as pictures and drawings to check the scheduling etc., which cause the defect of communication and problems such as change order. Accordingly, this study introduces the Web 3Ds and 3D Libraries, intends to present the effect on modeling of three-dimensional work structure using Web 3D in cyberspace.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.367-372
• /
• 2013

In general, Levenshtein distance algorithm have a problem with not distinguish the consideration of vacabulary retrieve, because Levenshtein methode is used to vocabulary order are not defined. In this paper, we propose a improved Levenshtein methode, it effectively manage the vocabulary retrieve by frequency use of a vocabulary, and it gives the weight number which have a order between vocabularies. Therefore proposed methode have a advantage of solve the defect of perception rate in the case of increase the vocabulary, improve the recognition time become higher and it can be effectively retrieval space management.. System performance as a result of represent vocabulary dependence recognition rate of 97.81%, vocabulary independence recognition rate of 96.91% in indoor environment. Also, vocabulary dependence recognition rate of 91.11%, vocabulary independence recognition rate of 90.01% in outdoor environment.