• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1991년도 춘계공동학술대회 발표논문 및 초록집; 전북대학교, 전주; 26-27 Apr. 1991
• /
• pp.423-439
• /
• 1991

본 연구의 목적은 당제철소에서 생산하는 제품중 전기강판 방향성 제품의 제질(철손) 불량원인을 추적하여 조업 guidance를 제시하는 model개발이다. model개발은 현장조업 data에 대해 상관분석, 회귀분석, 분산분석등의 통계적분석을 통하여 재질에 영향을 미치는 주 관련인자들의 조업기준 재정립과 menu화면에 의한 자동 불량원인 추적 model을 개발하였으며, model개발을 위한 사용 tool은 SAS package를 활용하였다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2005년도 추계학술발표대회 및 정기총회
• /
• pp.305-308
• /
• 2005

본 연구에서는 기존의 소프트웨어 결함 추적 시스템에 대한 벤치마크를 수행하여 기능을 비교, 분석하고, 그 결과를 바탕으로 국내에서 최초로 웹기반 결함 추적 시스템을 개발하였다. 개발된 결함 추적 시스템에 대한 개발사례를 기술하고 해당 시스템이 테스팅 조직의 생산성 향상에 기여하는 정도를 연구결과로 증명하였다.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1297-1301
• /
• 2013

This paper analyzes of PD occurrence position through an analysis of the arrival time difference between the GIS partial discharge signal. Because of GIS (Gas Insulated Switchgear) is a facility very important power equipment and as part of the equipment that make up the power system, the stabilization of the power industry, which accounted for 88.5% share of GIS substation in the form of a substation is an important equipment for power supply. In the situation where we are gradually expanding the need for preventive diagnosis in order to improve the efficiency of equipment management and failure prevention for Preventive diagnosis. In this paper as a method for extracting pre-defect of failure of GIS Apply the average value method of calculating the 5 times each using a pulse of the first time of the second pulse (${\Delta}t$) with an oscilloscope generation position PD(Partial Discharge). the results of GIS internal inspection, the partial discharge of the actual the position of the partial discharge was confirmed with an accuracy of about 82% of positions. Arrival time difference in the most effective manner if the partial discharge of GIS internal occurs by applying the averaging method and TOA(Time of arrival) method, the partial discharge occurs you through the measurement and analysis of PD signal occurs was confirmed in the experiment are presented and diagnostic methods location tracking.

• 한국전자통신학회논문지
• /
• 제13권6호
• /
• pp.1275-1280
• /
• 2018

실시간으로 모습이 확인 가능한 CCTV 가로등과 어린이 안심 알리미 어플의 단점을 보완하기 위해 스마트폰 연동 위치추적 가로등과 원격 디스플레이 장치를 구현하였고 초음파 센서, 조도 센서로 주변 밝기와 물체를 감지해 LED의 밝기를 조절하도록 설계하였다. CCTV는 블루투스 통신을 통해 스마트폰의 위치를 전송받아 해당 위치의 대상을 촬영한다. 촬영된 영상은 WiFi를 통해 태블릿 PC로 무선 송출하는 시스템을 구현하였다.

• 산업경영시스템학회지
• /
• 제42권3호
• /
• pp.80-88
• /
• 2019

Recently, automobile manufacturing companies, which are major customers of them, are requiring IATF 16949 (ISO/TS 16949) certification as a mandatory requirement to secure product quality. In particular, IATF 16949 : 2016, revised in October 2016, was reinforced product traceability requirements for production information management by lot in the production process. Therefore, small and medium-sized precision parts processing companies in the automobile industry are very difficult to survive due to quality and price competition for customers satisfaction. MES (Manufacturing Execution System) is required to solve this problem. However, small and medium sized precision parts processing enterprises are reluctant to introduce the MES which is not suitable for the manufacturing environment of them such as high cost and low utilization. Even if the system is introduced, it is difficult to operate and maintain the system because the lack of computer manpower. In this paper, we propose a method for building a lot tracking system for small and medium precision parts processing companies by reviewing relevant literature and analyzing cases. In addition, by managing the production history for each lot of the final product in the system, we will grasp the effect of reducing the quality failure cost obtained by minimizing the range of defect selection.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.111.2-111
• /
• 2001

The research focuses on controlling a gap to measure the surface defect in semi-conductor fabrication device. The measurement is available accompanying a near field image gap control. In this article, a pneumatic servo system is adopted for the near field gap control. The advantage of the pneumatic servo system is on the preventing the possibility of contacting the device to the wapper surface, fence arising fatal damage. Furthermore, the air from the pneumatic system blows the some particle on the wapper during controlling. The target gap is less than 20 $\mu$m and the gap should keep same amount while the device moves around the surface. The experiment by the pneumatic servo control system is done by employing a simple PID control, and the tracking performance is remarkably verified. The target gap is set from 10 $\mu$m to 100 $\mu$m ...

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.81-85
• /
• 2002

원격화상강의시스템(Video Lecturing System)에 의한 강의수업의 장점 및 단점 그리고 문제점의 해결방안을 설문조사를 통해 분석하였다. 본 논문에서는 원격화상강의 수강자들의 설문결과로 인한 수업의 만족도 및 효율성결과를 일반강의와 비교 분석하여 원격화상강의의 우수성을 입증하여 미래의 대체교육법으로서 제시하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.435-437
• /
• 1998

In this productive system, it needs to control the each axis motion harmoniously to perform accurately for the manufacturing, transporting and printing. Independent Axis Control usually used for this objection. However, if Independent Axis Control mismatched the parameter of each axis system or in the case of free curve tracking or the case of high speed control, there would be big contour error so that cannot achieve control objection. As a result, there is Contour Control method suggested to supply for this defect. This paper carried modeling of biaxial system and implemented Independent Axis Control & Contouring Control on straight line, circular, and coner path by simulation and experiment. If feedrate increased, contour error growed. In consequence, according to this factor, we introduced contouring controller, so we could find the fact that contour error was reduced more than that of independent axis control about each path.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권3호
• /
• pp.336-341
• /
• 1999

Up today, nationally published research results on the methods used in HA modems have studied and shown the major methods; the ASK method and the DS/SS method. In this paper, we applied the DPSK reception method on the PSK method so that solved the acquisition and tracking problem of the signal synchronization which is the defect of PSK. Also, it has been designed to fit in the CISRP and CENELEC specification so that make sure of no effects on other part of the system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1753-1755
• /
• 2003

MOF insulating cover used in 22.9 kV substation hasn't shown good performance in terms of electrical safety because of its defect by short clearance MOF cover and each input and output wire junction part. The MOF cover is easily moved by outside environment as wind or rain weather because of different size MOF cover and insulating busing, also can be leaded to breakdown by tracking. Therefore, we propose MOF cover which effectively prevents from electrical accidents in this paper. To decrease the electric field concentrated on specific part, we roundly design the shape of MOF cover and clearance between cover and live part was adjusted to be longer than before. The proposed MOF cover is evaluated by using the electric field solution program.