• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.190-200
• /
• 2014

The video-based system of the broadcasters and the video-related institutions have shifted from analogical to digital in worldwide. This migration process can generate a defect, digital dropout, in the quality of the contents. Moreover, there are limited researches focused on these kind of defects and those related have limitations. For that reason, we are proposing a new method for feature extraction emphasizing in the peculiar block pattern of digital dropout based on discrete cosine transform (DCT). For classification of error block, we utilize support vector machine (SVM) which can manage feature vectors efficiently. Further, the proposed method overcome the limitation of the previous one using continuity of frame by frame. It is using only the information of a single frame and works better even in the presence of fast moving objects, without the necessity of specific model or parameter estimation. Therefore, this approach is capable of detecting digital dropout only with minimal complexity.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.4
• /
• pp.57-65
• /
• 2008

As the society is being developed, the desire about life quality is also growing. Even though the process of waterproof work has very close relation with these life quality, we always focus on management after problem than the precaution of problem. So this process has the highest rate of mengel. We develop LCC analysis model considering the precaution and try to show the necessity of the precaution by comparing and analyzing every alternative proposal during LCC. By studying of the previous work and the result of questionnaire, we deduce the problem of waterproof work in construction area. By discussion with an expert in this process and research, we make solutions about precaution and set the cost items in every alternative proposal about these solutions. We understand the effect of each elements through sensitive analysis of the cost items, and find the economically best suited solution.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.1 s.62
• /
• pp.39-43
• /
• 2005

The study investigated the nondestructive characteristics of damage, caused by law-velocity impact, on symmetric cross-ply laminates, composed of [0o/90o]16s, 24s, 32s, 48s. The thickness of the laminates was 2, 3, 4 and 6 mm, respectively. The impact machine used, Model 8250 Dynatup Instron, was a drop-weight type that employed gravity. The impact velocities used in this experiment were 0.75, 0.90, 1.05, 1.20 and 1.35 m/sec, respectively. Both the load and the deformation increased when the impact velocity was increased. Further, when the load increased with the laminate thickness in the same impact velocity, the deformation still decreased. The extensional velocity was quick, as the laminate thickness increased in the same impact velocity and the impact velocity increased in the same laminate thickness. In the ultrasonic scans, the damaged area represented a dimmed zone. This is due to the fact that the wave, after the partial reflection by the deflects, does not have enough energy to touch the opposite side or to come back from it. The damaged laminate areas differed, according to the laminate thickness and the impact velocity. The extensional velocities are lower in the 0o direction and higher in the 90o direction, when the size of the defect increases. However, it was difficult to draw any conclusion for the extensional velocities in the 45o direction.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.1
• /
• pp.44-50
• /
• 2001

The largest problem in applying the elecbical partial discharge measurement method the transformer that has been operated until now is the removal of external corona noise In this thesis, a methcd was studied. to rneasme only fue partial discharge sIgnal due to the defoct in transfonrer except the external corona noise. To find out the types of partial discharge and corona noise within a transfomr, a partial discharge was made in use of a needle-plane electrodes within a model transfonner and, at the same time, an external corona noise was generated in use of a rod-sphere electrcdes in the air around the transformer. Both of a partial clischarge signal caused from an intemat defect within a transformer and an external noise were found at the rogowski coil which was located at transformer earth wire. When the external corona noise, which was separately measured in use of an antenna sensor out of transfonner, was removed from the signal measured on rogowski coil, the signal caused by partial discharge within a transformer would effectively be acquired.quired.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.179-184
• /
• 2006

Rapid and high-precision positioning with a Global Navigation Satellite System (GNSS) is feasible only when very precise carrier-phase observations can be used. There are two kinds of mathematical models for ambiguity resolution. The first one is based on both pseudorange and carrier phase measurements, and the observation equations are of full rank. The second one is only based on carrier phase measurement, which is a rank-defect model. Though the former is more commonly used, the latter has its own advantage, that is, ambiguity resolution will be freed from the effects of pseudorange multipath. Galileo will be operational. One of the important differences between Galileo and current GPS is that Galileo will provide signals in four frequency bands. With more carrier-phase data available, frequency combinations with long equivalent wavelength can be formed, so Galileo will provide more opportunities for fast and reliable ambiguity resolution than current GPS. This paper tries to investigate phase only fast ambiguity resolution performance with four Galileo frequencies for short baseline. Cascading Ambiguity Resolution (CAR) method with selected optimal frequency combinations and LAMBDA method are used and compared. To validate the resolution, two tests are used and compared. The first one is a ratio test. The second one is lower bound success-rate test. The simulation test results show that, with LAMBDA method, whether with ratio test or lower bound success rate validation criteria, ambiguity can be fixed in several seconds, 8 seconds at most even when 1 sigma of carrier phase noise is 12 mm. While with CAR method, at least about half minute is required even when 1 sigma of carrier phase noise is 3 mm. It shows that LAMBDA method performs obviously better than CAR method.

• Journal of Arbitration Studies
• /
• v.29 no.2
• /
• pp.107-132
• /
• 2019

The arbitration procedure, which is a private trial, does not have a separate enforcement agency. Therefore, unless a party consents to the arbitration award and voluntarily fulfills the award, its execution is accomplished through the implementation of the national court. In particular, the decision in the foreign arbitration procedure will be refused or rejected for the arbitration award in case the proceedings of the law and procedure on which the judgment is based are caused by inconsistency with the domestic law or procedural defect. However, all foreign arbitration awards generally do not have to go through the approval process, and it will come into force with the arbitration award. In the case of Germany in the revision of the German Civil Procedure Act of 1996, the main provisions of the New York Convention concerning the ratification and enforcement of arbitration proceedings are reflected. Germany provides for the arbitration procedures in the arbitration proceedings of Book 10 of the Civil Procedure Act. Particularly, with Article 1061 in Book 10 Section 8 below, the approval and enforcement of foreign arbitrators shall be governed. Article 1061 has been referred to as "The New York Convention on the Recognition and Enforcement of Foreign Jurisdictions," Article 5 (1). The main reasons for approval and enforcement rejection are: (1) Reason for the acceptance or refusal of enforcement by request of the parties: Reason for failure of subjective arbitration ability, invalidation of arbitration agreement, collapse of attack or defense method, dispute not included in arbitration agreement, (2) Reasons for the approval and enforcement of arbitration considered by the competent authority of the arbitrator: violation of objective arbitration ability, violation of public order, but not based on the default of German statute.

• Journal of the Korean Society of Radiology
• /
• v.15 no.4
• /
• pp.539-545
• /
• 2021

Radiation therapy is accompanied by adverse radiation effective. In particular, it is accompanied by disorders of the vascular system. Therefore, oxygen and nutrient deficiency occurs in the regeneration area. Eventually, osteoradionecrosis is formed in this cellular environment. According to a precedent study, bone morphogenetic protein-2 is used to overcome osteoradionecrosis. The purpose of this study was to investigate the regeneration ability of osteoradionecrosis by treating bone-forming protein-2 on a fibrinogen scaffold which is a biomaterial that is frequently used for bone regeneration after irradiation of the rat head. In addition, the purpose of this study was to verify the bone regeneration effect from the eight weeks. According to the experimental results, in the calvarial defected model of the irradiated mouse, making bone-formation was obtained after 8 weeks rather than bone-formation period in the early 4 weeks. moreover, it was found that the regenerated bone formation of the fibrinogen scaffold is formed from the inside of the bone of the defect area.

• Geomechanics and Engineering
• /
• v.30 no.1
• /
• pp.93-105
• /
• 2022

With the exploitation of natural resources in China, underground resource extraction and underground space development, as well as other engineering activities are increasing, resulting in the creation of many defective rocks. In this paper, uniaxial compression tests were performed on rocks with double holes and fractures at different angles using particle flow code (PFC2D) numerical simulations and laboratory experiments. The failure behavior and mechanical properties of rock samples with holes and fractures at different angles were analyzed. The failure modes of rock with defects at different angles were identified. The fracture propagation and stress evolution characteristics of rock with fractures at different angles were determined. The results reveal that compared to intact rocks, the peak stress, elastic modulus, peak strain, initiation stress, and damage stress of fractured rocks with different fracture angles around holes are lower. As the fracture angle increases, the gap in mechanical properties between the defective rock and the intact rock gradually decreased. In the force chain diagram, the compressive stress concentration range of the combined defect of cracks and holes starts to decrease, and the model is gradually destroyed as the tensile stress range gradually increases. When the peak stress is reached, the acoustic emission energy is highest and the rock undergoes brittle damage. Through a comparative study using laboratory tests, the results of laboratory real rocks and numerical simulation experiments were verified and the macroscopic failure characteristics of the real and simulated rocks were determined to be similar. This study can help us correctly understand the mechanical properties of rocks with defects and provide theoretical guidance for practical rock engineering.

• Advances in nano research
• /
• v.14 no.1
• /
• pp.1-15
• /
• 2023

Driven by the scaling down of transistor node technology, graphene became of interest to many researchers following the success of its fabrication as graphene nanoribbons (GNRs). However, during the fabrication of GNRs, it is not uncommon to have defects within the GNR structures. Scaling down node technology also changes the modelling approach from the classical Boltzmann transport equation to the quantum transport theory because the quantum confinement effects become significant at sub-10 nanometer dimensions. The aim of this study is to examine the effect of Stone-Wales defects on the electronic properties of GNRs using a tight-binding model, based on Non-Equilibrium Green's Function (NEGF) via numeric computation methods using MATLAB. Armchair and zigzag edge defects are also implemented in the GNR structures to mimic the practical fabrication process. Electronic properties of pristine and defected GNRs of various lengths and widths were computed, including their band structure and density of states (DOS). The results show that Stone-Wales defects cause fluctuation in the band structure and increase the bandgap values for both armchair GNRs (AGNRs) and zigzag GNRs (ZGNRs) at every simulated width. In addition, Stone-Wales defects reduce the numerical computation DOS for both AGNRs and ZGNRs. However, when the lengths of the structures increase with fixed widths, the effect of the Stone-Wales defects become less significant.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.5
• /
• pp.167-174
• /
• 2009

The meaning of Database in order to manage the data which is huge in the meeting of the record which logically had become the fire tube or file 'efficiently' is widely used from the place which controls a many double meaning data. Like this data base it creates, it manages, the programs which send an answer back according to demand of the user as DBMS it calls. Like this it will be able to grasp the quality level of the data base software product which is important index from the research which index it buys it defined. Also, in order to produce the result of index it selects the collection item which is necessary and collection and analysis it leads and what kind of defect types occur substantially mainly, and it confirmed and the test and evaluation model in about data base software and a tentative instance it developed it analyzed.