• Journal of the Korea Furniture Society
• /
• v.22 no.1
• /
• pp.72-81
• /
• 2011

These days, beds have been developed not as furniture to sleep in but Healthcare Furniture. The function of heating, non-electronic-waves and far-infrared rays have been added. Also, eco-friendly materials such as stone, mud, rubber and wood are combined to them together with the radiation-heating method using heat conduction through electronic coil and hot water circulation. Modern people suffer from stress and fatigue. The hot issue is "health." Focused on the health, the development of design for beds considering the influence electronic waves, anions, deep sleep and the density of toxic materials have on human bodies has become urgent. In this study, the trend, specification and efficiency of the functional health-related electronic coil technology are analyzed. Through the analysis, the environmental standards are set. According to them, technology, eco-friendly materials and additional functions for the development of the design are considered. Also, the government is promoting the IEC international standardization for the Korean traditional floor heating style beds. In preparation for that, we adopted new HPT method technology. It enables non-electronic-waves, low electricity and stable temperature maintenance control for the warm top and the cool bottom. Also, the head boards and the frames of the beds can be separated. Through this separation, the beds can be easily moved or installed. Eco-friendly materials such as Hinoki cypress wood and red clay and the existing tables function are combined to the head boards so they can be used as drawers and display shelves. If they are used as separate items, they can be used as covers. This is how we suggest the design for the heating beds.

• Radiation Oncology Journal
• /
• v.12 no.3
• /
• pp.295-300
• /
• 1994

It was the purpose of present study to develop a new thermoseed for heating deep-seated tumors and assessment of the effect of magnetic control on thermoseeds. Aqueous suspension of iron micro spheres (Ferropolysaccharide) was injected directly into the VX-2 hepatoma and heated with 1.2 MHz inductive radiofrequency unit. Aqueous thermoseed suspension was delivered to the tumor by simple percutaneous injection. The limitation of the thermoseed heating method is the positional change of thermoseed particles in the tumor after implantation. The thermoseed particles could enter the systemic blood circulation and cause a severe embolization of a critical organ. To minimize this limitation, we have used the magnetic control after loading the thermoseed in the tumor, W hen ferropolysaccharides were exposed to a strong magnetic field, they magnetized and subsequently exerted a magnetic force on each other, forming larger aggregates of particles. The size of aggregated Particles were too big to enter the systemic blood circulation. Thus, unlike other thermoseed method, we hold the thermoseed particles stationary in the tumor. The temperature of the injected site and immediate vicinity elevated by $4-5^{\circ}C$. The temperature of the surrounding normal hepatic tissue elevated by $1-2^{circ}C$ only. The heating effect within the tumor was variable depending on the density of ferromagnetic aqueous suspension. Our results suggest that inductive heating of tumor injected with ferropolysaccharide solution offers the possibility of effective heat delivery to the defined tumor volume, which is difficult to heat with other heating devices.

• Journal of the Korean Society of Food Culture
• /
• v.26 no.5
• /
• pp.455-467
• /
• 2011

The main purpose of this study was to survey the various kinds of recipes for pheasant found in seventeen Korean cookbooks published from the 1800's to the 1990's. There were 95 pheasant recipes found in the literature which could be classified into three major groups: cooking with moist heat, cooking with dry heat, and other. The three major groups were then broken down into thirteen smaller groups. A detailed look at the frequency of terms in each recipe shows that Gui Sanjeok (grilled Korean shish kebabs) appears 24 times, Guk Tang and Jeongol (soup and stew) 23 times, Kimchi (fermented cabbage) 11 times, Po (jerky) 9 times, Jorim (boiled in soy sauce) 7 times, Jjim (steamed) 6 times, Bokeum (stir-fried) 5 times, Twigim (deep-fried) 3 times, Buchim (fried) 2 times, Jigae jijim (stewed) 2 times, and Jang (paste), Myeon (noodles), Gooum (boiled) and Yeot (Korean hard taffy) 1 time each. The main ingredient is always the pheasant. We investigated the use of the whole pheasant cooked, how to slice and tenderize pheasant meat, use the meat only, or use only certain parts. Depending on the characteristics of cooking recipes, pheasants with thin, soft bones and organs were investigated for cooking. Substituted materials were used for a few of the vegetables, meat, and seafood in the recipes, and seem to go well together. Garnishes used included pine nut powder and fried eggs. Seasoned salt, soy sauce, pepper, sesame, sesame oil, chopped onion, garlic, and ginger were also reported to have been used.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.5
• /
• pp.53-64
• /
• 2012

Deep and narrow welds can be produced by laser welding at high welding speeds with a narrow heat-affected zone (HAZ) and little distortion of the workpiece. This study aims to evaluate the usefulness of laser welding at automobile component manufacture. Microstructure observation, hardness test, tensile test and fatigue life test are performed by using the fiber laser welded SPFC590 steel sheets which is used widely in the manufacture of automotive seat frame. Three kinds of specimens are only a SPFC590 steel plate, quasi-butt joint plate and lap joint plate by laser welding. The following results that will be helpful to understand the static strength, fatigue crack initiation and growth mechanism were obtained. (1) The tensile strength of quasi butt joint specimens nearly equal to base metal specimens, but lap joint specimens fractured in shear area of weld metal. (2) The fatigue strength of quasi-butt joint specimen was approximately 8 percent lower than that of the base metal specimens. Furthermore, the lap joint specimens were less than 86 percent of the base metal specimens. (3) The lap joint fatigue specimens fractured at shear area in high level stress amplitude, while fractured at normal area in low level stress amplitude. From these results, the applicability of the laser welding to the automobile component is discussed.

• The Journal of Korean Physical Therapy
• /
• v.23 no.6
• /
• pp.1-7
• /
• 2011

Purpose: The purpose of this study was to investigate the effect of movement training based on motor control theory on pain and average power of muscles in patients with shoulder impingement syndrome and to develop more effective training methods. Methods: We studied 35 patients with shoulder impingement syndrome. Patients were randomly assigned to an experimental group or a control group according to the intervention. The therapeutic modalities such as superficial heat, deep heat, and electronic stimulus, and motor control training with strengthening exercises were applied to the experimental group and therapeutic modalities only were applied to the control group. All interventions were done 3 times a week for 4 weeks. Before the intervention and again after the 4 weeks, we measured pain utilizing a visual analog scale. We measured average power using isokinetic equipment. Results: After application of the intervention, pain significantly decreased in both the experimental group and the control group. There was a significant difference between the extent of the decrease between experimental and control groups. After the intervention, the average power between the two groups were significant at an angle of $60^{\circ}$/sec and $180^{\circ}$/sec for external rotator and internal rotator muscles. They also showed significant improvement in all variables post-intervention compared to pre-intervention. Conclusion: This study indicates that there is an effect in giving appropriate motor control training to patients with shoulder impingement syndrome. It is assumed that there will be a need for more surveys on various variables for motor control training from now on.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.1
• /
• pp.69-77
• /
• 1996

The fatigue crack initiation behavior of plasma ion nitrided SACM645 steel was investigated through the rotary bending fatigue test and residual stress measurement by XRD. It was shown by XRD and EPMA that the plasma ion nitrided surface was composed of ${\gamma}^{\prime}(Fe_4N)$phase and ${\varepsilon}(Fe_{2-3}N)$phase, and that the nitrogen atoms existed in Fe matrix in diffusion layer. The OM, SEM and Auger spectroscopy showed that the depth of compound layer, mixed compound and diffusion layer, and diffusion layer was $8{\mu}m$, $30{\mu}m$ and $300{\mu}m$, respectively. However, the microhardness test showed that the depth of hardened layer was $500{\mu}m$. The tensile strength of the ion nitrided SACM645 was lower than that of the unnitrided SACM645, and the ion nitrided specimen was fractured without plastic deformation. The nitrided SACM645 showed much poorer low cycle fatigue properties than the unnitrided one. In rotary bending fatigue, the fatigue strength of the ion nitrided SACM645 was higher than that of the unnitrided specimen, and the fatigue crack initiation sites changed by applied fatigue stress levels. The XRD result showed that the ion nitrided SACM645 has the compressive residual stress from surface to $600{\mu}m$ deep and the tensile residual stress from $600{\mu}m$ to deeper site. It is thought that crack initiation takes place at the point where the total stress of residual stress and applied stress is maximum.

• Korean Journal of Acupuncture
• /
• v.21 no.3
• /
• pp.147-158
• /
• 2004

Objectives : This study was aimed to investigate the methods for acupuncture and moxibustional treatment to insomnia Methods : The insomnia is classified by seven cause at main subject. According to this, arrange the acupuncture and moxibustional treatment for classical books, and explain eight meridian related to insomnia. Results : 1. Insomnia means deficiency of sleeping and it is the word generally used when a short period of sleeping, difficulty for deep sleeping and difficulty for recovery of original vital energy comes out. In oriental medicine, they understand that uneasiness condition occurred by abnormal operation of the internal organs as heart, liver, gallbladder, spleen, stomach, kidney, etc. caused by external affection or internal injury becomes Insomnia. 2. Cause of insomnia can be classified majorly as fire-transformation of liver and gallbladder , inner shaking of phlegm-heat , insufficiency of both the heart and the spleen, disharmony between heat and kidney, the dysfunction of the stomach, timidity of heart and gallbladder, the deficiency of Qi of the lung. They make insomnia with bad influence upon body and spirit. 3. The meridian system such as Heart Meridian of Hand Soeum, Pericardium Meridian of Hand Gworeum, Stomach Meridian of Foot Yangmyeong, Spleen Meridian of Foot Taeeum, Bladder Meridian of Foot Taeyang, Kidney Meridian of Foot Soeum, Gallbladder Meridian of Foot Soyang, Liver Meridian of Foot Gworeum and Lung Meridian of Hand Taeeum are used to treat insomnia. Sinmun acupoint and Naegwan acupoint are often used in particular because the they are good for calmming the spirit, the heart and purging the heart of (pathogenic) fire. 4. Especialy, Back-Su points of Bladder Meridian of Foot Taeyang was used by each causes. The Back-su Points was mainly used for heal the insomnia because the Back-Su points has good competent to control the ability of internal organs by direct effect to it. It is because the vitality flows through around back-Su. Conclusions : It comes to a conclusion as follows with research for relevancy of the main cause of insomnia and meridian system includes meridian point.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.10 no.1
• /
• pp.284-305
• /
• 1997

A Literatural study on the etiological factors, classification, prescription of hemorrhoids and hemorrhoids complicated by anal fistula following results were obtained. 1. The cause of hemorrhoids are long time sit, long time gate, overfatigue, overeating, imbalance of stool( constipation or diarrhea), pregnant fertility(overfatigue after childbirth, insufficiency of middle warmer energy), uncontrol sexual excess, pathgenic factors of wetness, heat, wind, dry, genetic cause, excess of anxiety, pile up of heat poison, weakness of entrails and viscera. The cause of hemorrhoid complicated by anal fistula are attack of external wind, heatness, dry, fire, wetness(pathgenic factors), inapporiate treatment and chronic disease, greasy diet, excess of anxiety, constipation, uncontrol sexual excess, obstacle of circulation of vital energy and blood on anal site. 2. Classification of hemorrhoids are female hemorrhoids, male hemorrhoids, pulse hemorrhoids, intestines hemorrhoids, vital energy hemorrhoids, wine hemorrhoids, blood hemonhoids, flowing hemorrhoids. Classification with other method are external hemorrhoids, internal hemorrhoids, mixed hemorrhoids, excrescence hemorrhoids, nipple homorrhoids. External hemorrhoids is classified of varicosis of hemorrhoidal vein, connective tissue form, thrombus form. Classification of hemorrhoid complicated by anal fistula are simple lower hemorrhoid, lower mixed hemorrhoid, deep hemorrhoid, outer of one hole hemorrhoid, a horseshoe hemorrhoids. Once more classificated of four are space of sphincter muscle form, penetration sphincter muscle form, upper of sphincter muscle form, outer of sphincter muscle form. 3. Therapy method of hermorrhoid and hemorrhoid complicated by anal fistula are internal method, fumigation method method, ointment, method of close with medicine, necrotizing method, hot medicated compress( gxternal method), injection, insertion, bind, (operation) and acupuncture therapy (the others method) 4. Herb medicine for many used of internal method are Scutellaria baikalensis George(黃芩), Coptis japonia Makino(黃連), Rehmania giutinosa Liboschitz ex Fischer & Meyer(生地黃), Poncirus trifoliata Refinesque(枳殼), Sanguisorba officinalis Linne(地楡), Sophora japonica L.(槐花), Cnidium officinale Makino (川芎), Astragalus membranaceus Bunge(황기), Angelica gigas Nakai (當歸). 5. Herb medicine for many used of fumigation are Schlechtendalia Chinesis J. Bell (五倍子), Artemisia Vulgaris L. var indica Maxim(艾葉), Poncirus trifoliata Refinesque (枳殼), Nepeta japonica Maximowicy(荊芥), And herb medicine for many used of ointment are Calomelas(輕粉), Alum(白礬), Boswellia carterii Birdwood(乳香), Os Draconis Fossilia Ossis Mastodi(龍骨).

• Journal of the Korea Concrete Institute
• /
• v.17 no.2 s.86
• /
• pp.293-302
• /
• 2005

This study describes data from determination of the optimum mix proportion and site application of the mass concrete placed in bottom slab and side wall having a large depth and section as main structures of LNG in-ground tank. This concrete requires low heat hydration, excellent balance between workability and consistency because concreting work of LNG in-ground tank is usually classified by under-pumping, adaptation of longer vertical and horizontal pumping line than ordinary pumping condition. For this purpose, low heat Portland cement and lime stone powder as cementitious materials are selected and design factors including unit cement and water content, water-binder ratio, fine aggregate ratio and adiabatic temperature rising are tested in the laboratory and batch plant. As experimental results, the optimum unit cement and water content are selected under $270kg/m^3$ and $l55{\~}l60 kg/m^3$ separately to control adiabatic temperature rising below $30^{\circ}C$ and to improve properties of the fresh and hardened concrete. Also, considering test results of the confined water ratio($\beta$p) and deformable coefficient(Ep), $30\%$ of lime stone powder by cement weight is selected as the optimum replacement ratio. After mix proportions of 5cases are tested and compared the adiabatic temperature rising($Q^{\infty}$, r), tensile and compressive strength, modulus of elasticity, teases satisfied with the required performances are chosen as the optimum mix design proportions of the side wall and bottom slab concrete. $Q^{\infty}$ and r are proved smaller than those of another project. Before application in the site, properties of the fresh concrete and actual mixing time by its ampere load are checked in the batch plant. Based on the results of this study, the optimum mix proportions of the massive concrete are applied successfully to the bottom slab and side wall in LNG in-ground tank.

• Journal of the Korean Society for Heat Treatment
• /
• v.21 no.4
• /
• pp.183-188
• /
• 2008

Hot press forming allows geometrically complicated parts to be formed from sheet and the rapid cooling hardens them to extremely high strength. The main purpose of this research is to characterize Al coated layer in Al coated boron steel during hot press forming. For the hot press hardening experiment, test specimens were heated up to $810{\sim}930^{\circ}C$ and held for 3, 6 and 9 minutes, respectively. And then, some specimens were press hardened and others were air-cooled without any pressing for the comparison purpose. Al coated layer shows four distinct micro-structural regions of interest; diffusion zone, Al-Fe zone(I) low-Al zone(LAZ) and Al-Fe zone(II). Band-like LAZ is clearly shown at temperature ranges of $810{\sim}870^{\circ}C$ and sparsely dispersed at temperature higher than 900oC. The micro-cracking behavior in the Al coated layer during forming were also analyzed by bending and deep drawing tests. The strain concentration in softer LAZ is found to be closely related with micro-cracking and exfoliation in coated layer during forming.