열처리공학회지 (Journal of the Korean Society for Heat Treatment)

  • 제21권4호
  • /
  • Pages.183-188
  • /
  • 2008
  • /
  • 1225-1070(pISSN)
  • /
  • 2508-4046(eISSN)
한국열처리공학회 (The Korean Society for Heat Treatment)
권호 표지

고온 프레스성형시 보론강 알루미늄 코팅층 거동특성

Characterization of Aluminum Coated Layer in Hot Press Forming of Boron Steel

  • 장정환 (부산대학교 정밀기계공학과/정밀정형 및 금형가공 연구소) ;
  • 주병돈 (부산대학교 정밀기계공학과/정밀정형 및 금형가공 연구소) ;
  • 이재호 (부산대학교 정밀기계공학과/정밀정형 및 금형가공 연구소) ;
  • 문영훈 (부산대학교 정밀기계공학과/정밀정형 및 금형가공 연구소)
  • Jang, Jeong-Hwan (Department of Mechanical and Precision Engineering/Engineering Research Center for Net Shape and Die Manufacturing, Pusan National University) ;
  • Joo, Byeong-Don (Department of Mechanical and Precision Engineering/Engineering Research Center for Net Shape and Die Manufacturing, Pusan National University) ;
  • Lee, Jae-Ho (Department of Mechanical and Precision Engineering/Engineering Research Center for Net Shape and Die Manufacturing, Pusan National University) ;
  • Moo, Young-Hoon (Department of Mechanical and Precision Engineering/Engineering Research Center for Net Shape and Die Manufacturing, Pusan National University)
  • 투고 : 2008.06.23
  • 심사 : 2008.07.14
  • 발행 : 2008.07.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Hot press forming allows geometrically complicated parts to be formed from sheet and the rapid cooling hardens them to extremely high strength. The main purpose of this research is to characterize Al coated layer in Al coated boron steel during hot press forming. For the hot press hardening experiment, test specimens were heated up to $810{\sim}930^{\circ}C$ and held for 3, 6 and 9 minutes, respectively. And then, some specimens were press hardened and others were air-cooled without any pressing for the comparison purpose. Al coated layer shows four distinct micro-structural regions of interest; diffusion zone, Al-Fe zone(I) low-Al zone(LAZ) and Al-Fe zone(II). Band-like LAZ is clearly shown at temperature ranges of $810{\sim}870^{\circ}C$ and sparsely dispersed at temperature higher than 900oC. The micro-cracking behavior in the Al coated layer during forming were also analyzed by bending and deep drawing tests. The strain concentration in softer LAZ is found to be closely related with micro-cracking and exfoliation in coated layer during forming.

키워드

참고문헌

  1. P. Akerstrom, M. Oldenburg : Austenite decomposition during press hardening of a boron steel-Computer simulation and test, Journal of Materials Processing Technology, 174 (2006) 399-406 https://doi.org/10.1016/j.jmatprotec.2006.02.013
  2. S. Ahmed, J. M. Titchmarsh, M. R. Kilburn and C. R. M. Grovenor : Examination of the influence of boron on the microstructure and properties of low C ferritic steels using NanoSIMS and TEM, Applied Surface Science, 252 (2006) 7062-7065 https://doi.org/10.1016/j.apsusc.2006.02.239
  3. 강수영, 이재성, 김종하, 이호기, 이경남 : Press Hardening 공정의 자동차 부품 적용 동향, Journal of KSTP, 5(4) (1996) 263-268
  4. M. H. Baarman : Effect of boron additions on continuous cast low-carbon steel wire, Scandinavian J. of Metallurgy, 27 (1998) 148-158
  5. N. Gope, D. K. Rout, S. Mukherjee, G. Jha, A. N. Bhagat, A. K. Verma and D. Bhattacharjee : High strength steels for automotive applications: Recent trends and experience at Tata Steel, Society of Automotive Engineers, (2005) 2005-26-333
  6. A. Turetta, S. Bruschi and A. Ghiotti : Investigation of 22MnB5 formability in hot stamping operations, Journal of Materials Processing Technology, 177 (2006) 396-400 https://doi.org/10.1016/j.jmatprotec.2006.04.041
  7. P. Ravier, L. G. Aranda and Y. Chastel : Hot stamping experiment and numerical simulation of pre-coated USIBOR1500 quenchable steels, SAE, (2003) 2003-01-2859
  8. M. Eriksson, M. Oldenburg, M. C. Somani and L. P Karjalainen : Testing and evaluation of material data for analysis of forming and hardening of boron steel components, Modelling and Simulation in Materials Science and Engineering, 10 (2002) 277-294 https://doi.org/10.1088/0965-0393/10/3/303
  9. M. Merklein and J. Lechler Investigation of the thermo-mechanical properties of hot stamping steels, J. of Materials Processing Technology, 177 (2006) 452-455 https://doi.org/10.1016/j.jmatprotec.2006.03.233
  10. C. J. Wang and S. M. Chen : The high-temperature oxidation behavior of hot-dipping Al-Si coating on low carbon steel, 200 (2006) 6601-6605 https://doi.org/10.1016/j.surfcoat.2005.11.031