• 한국농공학회지
• /
• 제24권3호
• /
• pp.84-91
• /
• 1982

This study was conducted to investigate the consolidation characteristics of repeated increasing and decreasing load m marine clay. Consolidation test was performed by the whole repetition of increasing and decreasing load and the partial repetition of increasing and decreasing load. The results obtained were as follows: 1. The void ratio e was decreased according to the increase of preloading and the repe- tition of increasing and decreasing load. 2. In case of the partial repetition of increasing and decreasing load the compression index Cc was decreased with the increase of preloading and the repetition of increa- sing and decreasing load 3. The expansion rate was greatly increased with the whole repetition of increasing and decreasing load and it was inclined to be increased with the increase of preloading in case of the partial repetition. 4. The coefficient of volume compressibility were decreased according to the repetition of increasing and decreasing load 5. The secondary consolidation coefficient was decreased with the repetition of increasing and decreasing load. Especially in case of the partial repetition, the peaks of secon- dary consolidation curves could be found to move toward the vicinity of preloading.

• 대한수학회논문집
• /
• 제25권3호
• /
• pp.391-404
• /
• 2010

The well-known characterizations of the Schwartz space of rapidly decreasing functions is extended to new algebras of rapidly decreasing generalized functions.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.141-147
• /
• 2005

Usually, processing whole project or a part of frame work delays due to acceleration, changing orders, management, characters of project. overtime, worker crowding, early occupation in the field of construction. Through a whole project, these factors cause decreasing construction labor-productivity which is the most dependent in business of construction. These kind of decreasing of construction labor-productivity cause many negative effects, just as extension of time, increasing cost in project of construction. Regardless of characters of construction or decreasing labor-productivity, extension of time is a incident which needs acceleration, also it cause a high possibility of claim and dispute. The productivity has just a broad meaning in business of construction. That's why it's difficult to apply in the field of construction. Especially, factors increasing or decreasing labor-productivity is defined by analysis of working as qualitative and outlined evaluation. However, study of the each factor decreasing construction labor-productivity analysis has not researched, because of difficulty of systematic measurement and management. The existed studies about management of productivity are just focused on estimation of productivity, not on evaluation of productivity. It was true that I couldn't examine clearly about the analysis of how much important per each the factor which have influence on labor-productivity because of the characteristic as qualitative that the labor productivity have On this study, i tried to get the factors decreasing of labor- productivity with gathering opinions of panels of expert's studies about the factors decreasing of labor-productivity on project of construction through Delphi method and i evaluated the result factors as quantitatively and subjectively about importance of factors decreasing construction labor-productivity Analysis, using AHP Method by Saaty. Also, using Delphi and AHP method, 1 suggest substantiated method qualitative factors are measured by quantitative criteria.

• 한국치위생학회지
• /
• 제11권4호
• /
• pp.595-602
• /
• 2011

Objectives : This study purpose were the effect of toothbrushing for decreasing halitosis for gingivitis and periodontitis patients. Methods : The university staffs were examined oral condition and analysised a change of oral health state score after using 3 types of toothbrushing. Results : The results were as followed : OHI-S shows that the decreasing effect takes place in the M. bass method and Tooth pick method, but shows no differences by each method. GI for Self test method shows decreasing effect after 2nd week during education while the M. bass method and Tooth pick method shows after 1st week during education. The M. bass method shows much greater effect of halitosis amongst 3 kind of method. PI for Self test method and Tooth pick method show decreasing effect. Decreasing effect during education shows until 2nd week by 3 kind of method, but it shows no differences after 3rd week. VSC(ppb) for M. bass method and Tooth pick method show decreasing effect. Decreasing effect during education shows after 3rd week by 3 kind of method, but it shows no differences until 2nd week. PHP for Self test method, M. bass method and Tooth pick method show decreasing effect after 2nd week during education. But, there is no differences of decreasing effect by among 3 kind of method. Conclusions : This study reports that it is necessary to carry outt further studies on the improvement of oral health management of adults based on the development of oral health education.

• Journal of Information Technology Applications and Management
• /
• 제23권4호
• /
• pp.117-125
• /
• 2016

Software reliability in the software development process is an important issue. In infinite failure non-homogeneous Poisson process software reliability models, the failure occurrence rates per fault. can be presented constant, monotonic increasing or monotonic decreasing pattern. In this paper, the reliability software cost model considering decreasing intensity function was studied in the software product testing process. The decreasing intensity function that can be widely used in the field of reliability using power law process, log-linear processes and Musal-Okumoto process were studied and the parameter estimation method was used for maximum likelihood estimation. In this paper, from the software model analysis, we was compared by applying a software failure interval failure data considering the decreasing intensity function The decreasing intensity function model is also efficient in terms of reliability in the arena of the conservative model can be used as an alternating model can be established. From this paper, the software developers have to consider life distribution by preceding information of the software to classify failure modes which can be gifted to support.

• Korean Journal of Mathematics
• /
• 제20권2호
• /
• pp.255-261
• /
• 2012

Let $\mathcal{O}_n$ be the set of ordered labeled trees on $\{0,\;{\ldots},\;n\}$. A maximal decreasing subtree of an ordered labeled tree is defined by the maximal ordered subtree from the root with all edges being decreasing. In this paper, we study a new refinement $\mathcal{O}_{n,k}$ of $\mathcal{O}_n$, which is the set of ordered labeled trees whose maximal decreasing subtree has $k+1$ vertices.

• Korean Journal of Mathematics
• /
• 제21권4호
• /
• pp.495-502
• /
• 2013

Let $\mathcal{T}^{(p)}_n$ be the set of p-ary labeled trees on $\{1,2,{\ldots},n\}$. A maximal decreasing subtree of an p-ary labeled tree is defined by the maximal p-ary subtree from the root with all edges being decreasing. In this paper, we study a new refinement $\mathcal{T}^{(p)}_{n,k}$ of $\mathcal{T}^{(p)}_n$, which is the set of p-ary labeled trees whose maximal decreasing subtree has k vertices.

• 한국경영과학회지
• /
• 제32권2호
• /
• pp.99-107
• /
• 2007

We consider (worst-case) robust optimization versions of the Economic Order Quantity (EOQ) model with decreasing cost functions. Two variants of the EOQ model are discussed, in which the purchasing costs are decreasing power functions in either the order quantity or demand rate. We develop the corresponding worst-case robust optimization models of the two variants, where the parameters in the purchasing cost function of each model are uncertain but known to lie in an ellipsoid. For the robust EOQ model with the purchasing cost being a decreasing function of the demand rate, we derive the analytical optimal solution. For the robust EOQ model with the purchasing cost being a decreasing function of the order quantity, we prove that it is a convex optimization problem, and thus lends itself to efficient numerical algorithms.

• 동력기계공학회지
• /
• 제12권1호
• /
• pp.47-52
• /
• 2008

This study was investigated the effect of subzero treatment in austempered ductile cast iron. Retained austenite transformed to martensite by subzero treatment and strain. With decreasing subzero treatment temperature and increasing strain, retained austenite transformed more to martensite and transformed 30% above by subzero treatment at $-196^{\circ}C$. With decreasing subzero treatment temperature, the value of strength and ratio of increasing of strength, hardness and ratio of increasing of hardness increased but the value of elongation and ratio of decreasing of elongation decreased. With decreasing subzero treatment temperature, impact value and ratio of decreasing of impact value decreased. In case of subzero treatment at $-196^{\circ}C$, hardness value increased about 18% and impact value decreased above 20%. We could find that in subzero treated specimens had a little of effect on the tensile properties but had very much effect on the hardness and value of the impact.

• 한국지반공학회논문집
• /
• 제28권11호
• /
• pp.87-99
• /
• 2012

국내에서 출토되는 퇴적암, 화성암 및 변성암군중 출토빈도가 높은 9개 암종을 대상으로 함수에 의한 탄성계수의 저감거동을 분석하였다. 일축압축강도 기준으로 20MPa 범위로 5개단계로 분활하여 단계별, Group별로 함수 저감거동을 분석한 결과는 5개 퇴적암 전부와 화성암군인 안산암을 포함한 모집단은 단일 저감거동을 보이며, 화성암군인 화강암, 유문암과 변성암군인 편마암은 또 다른 동일 거동을 보이며, 더욱이 저감속도가 퇴적암군을 포함한 모집단에 비해서 2배이상 빠르며 탄성계수의 잔존값도 매우 낮게 나타났다.