• 한국정보통신학회논문지
• /
• 제19권11호
• /
• pp.2569-2575
• /
• 2015

네트워크 RTK는 네트워크를 형성하는 다수의 기준국의 보정정보를 사용자 위치에 맞게 보간하여 사용함으로써 기준국과 사용자 간 기저선 거리 증가에 따른 공간이격 오차를 최소화 한다. 하지만 대류권 지연은 기상의 함수로 국지적인 기상변화를 원인으로 사용자와 네트워크 내 기준국 간 대류권 지연에 비선형 특성을 발생시킬 수 있으며, 이는 네트워크 RTK 성능을 저하시킬 수 있다. 따라서 본 논문에서는 태풍이 있던 날의 데이터를 기반으로 대류권 지연 변칙 사례를 모델링하고, 이를 이용하여 기준국 간 기상차이가 기준국에서 생성하는 보정정보에 미치는 영향을 분석한다. 또한, 기준국 간 대류권 지연의 비선형성이 네트워크 RTK 사용자에게 미치는 영향을 분석한다.

• 대한원격탐사학회지
• /
• 제17권2호
• /
• pp.165-181
• /
• 2001

Using a field spectrometer having a spectral range of 0.4$\mu\textrm{m}$~2.5$\mu\textrm{m}$ with a spectral resolution of 1nm, the researchers measured the reflectance of granite, andesitic rocks, sedimentary rocks, and pyrophyllite ore in the Ungsang area, Kyungsang Basin, South Korea. Spectral characteristics of the geological media were investigated from the analysis. The in-situ measured sites were selected in well exposed rock outcrops. In case of unfavorable weather conditions, rocks were sampled and remeasured under natural solar condition. The reflectance of field data was measurd at three sistes for granite, six sites for andesitic rock three sites for sedimentary rocks, and two sites for pyrophyllite ore. The vibrational absorption bands for pyrophyllite are detected in the spectral range of 2.0$\mu\textrm{m}$~2.5$\mu\textrm{m}$. The absorption band for granites in study area is not distinctive. The reflectance measured under normal field conditions showed strong absorption at wavelengths of 1.4$\mu\textrm{m}$ and 1.9$\mu\textrm{m}$ due to the effect of moisture in the atmosphere. After the bands of 1.4$\mu\textrm{m}$ and 1.9$\mu\textrm{m}$ were removed, Hull Quotient method was applied to characterize absorption bands. The reflectances of field data were calculated to estimate the band ratio corresponding to the Landsat TM and EOS Terra ASTER. The researchers suggest here that the TM band2, band3, band4, and band7 or ASTER band2, band3, band4, and band9 are the best combination for discriminating outcrops. The researchers tested and demonstrated using a Landsat TM image in the study area. For geologic applications, decorrelation stretch is also an effective tool to enhance the exposed rock mass in images.

• 한국지구과학회지
• /
• 제45권4호
• /
• pp.349-362
• /
• 2024

We aimed to evaluate the effectiveness of ensemble optimal interpolation (EnOI) in improving the analysis of significant wave height (SWH) within wave models using satellite-derived SWH data. Satellite observations revealed higher SWH in mid-latitude regions (30° to 60° in both hemispheres) due to stronger winds, whereas equatorial and coastal areas exhibited lower wave heights, attributed to calmer winds and land interactions. Root mean square error (RMSE) analysis of the control experiment without data assimilation revealed significant discrepancies in high-latitude areas, underscoring the need for enhanced analysis techniques. Data assimilation experiments demonstrated substantial RMSE reductions, particularly in high-latitude regions, underscoring the effectiveness of the technique in enhancing the quality of analysis fields. Sensitivity experiments with varying ensemble sizes showed modest global improvements in analysis fields with larger ensembles. Sensitivity experiments based on different decorrelation length scales demonstrated significant RMSE improvements at larger scales, particularly in the Southern Ocean and Northwest Pacific. However, some areas exhibited slight RMSE increases, suggesting the need for region-specific tuning of assimilation parameters. Reducing the observation error covariance improved analysis quality in certain regions, including the equator, but generally degraded it in others. Rescaling background error covariance (BEC) resulted in overall improvements in analysis fields, though sensitivity to regional variability persisted. These findings underscore the importance of data assimilation, parameter tuning, and BEC rescaling in enhancing the quality and reliability of wave analysis fields, emphasizing the necessity of region-specific adjustments to optimize assimilation performance. These insights are valuable for understanding ocean dynamics, improving navigation, and supporting coastal management practices.

• IEIE Transactions on Smart Processing and Computing
• /
• 제1권3호
• /
• pp.143-151
• /
• 2012

A new data-driven method for the design of a blind modulation frequency filter that suppresses the slow-varying noise components is proposed. The proposed method is based on the temporal local decorrelation of the feature vector sequence, and is done on an utterance-by-utterance basis. Although the conventional modulation frequency filtering approaches the same form regardless of the task and environment conditions, the proposed method can provide an adaptive modulation frequency filter that outperforms conventional methods for each utterance. In addition, the method ultimately performs channel normalization in a feature domain with applications to log-spectral parameters. The performance was evaluated by speaker-independent isolated-word recognition experiments under additive noise environments. The proposed method achieved outstanding improvement for speech recognition in environments with significant noise and was also effective in a range of feature representations.

• Journal of Astronomy and Space Sciences
• /
• 제18권1호
• /
• pp.63-70
• /
• 2001

IDGPS(Inverted Differential Global Positioning System)는 GPS의 위치 결정 정밀도를 향상시키는 여러 기법들 중 하나로서 주로 차량 위치 추적이나 물류 시스템에 이용된다. 본 연구에 적용된 IDGPS 기법은 사용자측에서 보내준 GPS 위치해와 위성정보, 그리고 기준국에서 생성된 오차 보정 정보를 이용해 관제국에서 사용자의 위치를 보정하는 것이다. 기준국과 사용자에서 발생한 오차들의 공간적 비상관성(spatial decorrelation)으로 인해 생길 수 있는 정밀도 보정 효과의 저하를 여러 개의 기준국을 이용한 NIDGPS(Network IDGPS)를 통해 해결하였다. 차량항법용 수신기를 사용자 수신기로서 사용하여 실험한 결과, IDGPS와 NIDGPS를 통해 단독 측위에 비해 평균적으로 2배 이상 정밀도가 향상됨을 확인할 수 있었다.

• ETRI Journal
• /
• 제40권2호
• /
• pp.197-206
• /
• 2018

Multiple-input multiple-output (MIMO) systems offer significant enhancements in terms of their data rate and channel capacity compared to traditional systems. However, correlation degrades the system performance and imposes practical limits on the number of antennas that can be incorporated into portable wireless devices. The use of switched parasitic antennas (SPAs) is a possible solution, especially where it is difficult to obtain sufficient signal decorrelation by conventional means. The covariance matrix represents the correlation present in the propagation channel, and has significant impact on the MIMO channel capacity. The results of this work demonstrate a significant improvement in the MIMO channel capacity by using SPA with the knowledge of the covariance matrix for all pattern configurations. By employing the "water-pouring algorithm" to modify the covariance matrix, the channel capacity is significantly improved compared to traditional systems, which spread transmit power uniformly across all the antennas. A condition number is also proposed as a selection metric to select the optimal pattern configuration for MIMO-SPAs.

• 전자공학회논문지B
• /
• 제33B권11호
• /
• pp.44-52
• /
• 1996

This paper proposes a KLT-CVQ scheme using PCNN to improbe the quality of the reconstructed images at a given bit rate. By using the PCNN and classified vector quantization, we exploit the high energy compaction and compelte decorrelation capbilities of the KLT, and the pdf (probability density function) shape and space-filling advantages of the vQ to improve the performance of the proposed hybrid coding technique. In order to preserve the preceptual fetures such as the edge components in the reconstructed images, we classified the input image blocks according to the texture energy measures of the local statistics and vector-coded them adaptively, and thereby reduces the possible edge degradation in the reconstructed images. The results of the computer simulations show that the performance of the proposed KLT-CVQ is higher than that of the KLT-CSQ or the DCT-CVQ in the quality of the reconstructed images at a given bit rate.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.308-311
• /
• 2002

Radar interferometric phase is sensitive to both ground topography and coherent surface displacement. The basic tactics of differential interferometric synthetic aperture radar (DInSAR) technique are to separate the two effects. Applications of DInSAR to Duk-Po area in Busan were studied. In the study area, an abrupt subsidence, possibly caused by sub-way construction, was observed by JERS-1 SAR interferometry. Differential interferograms were generated using twenty-three JERS-1 SAR data acquired between April 24, 1992, and August 7, 1998. Because the area is relatively flat with little topographic relief the topographic effects were not removed. A phase filtering and interferogram techniques were applied to increase fringe clarity as well as to decrease decorrelation error. The stacking improves the quality of interferograms especially when the displacement is discontinuous. The interferograms clearly show the evidence of subsidence along Duk-Po subway railroad. These results demonstrate that the interferogram stacking technique can improve the detectability of radar interferometry to an abrupt displacement and DInSAR is useful to geological engineering applications.

• 한국생산제조학회지
• /
• 제5권1호
• /
• pp.33-42
• /
• 1996

The high coherence of laser beam has made it possible to observe interference effects even in the light scattered from rough surfaces. That's why, when object with a scattering surface is illuminated with laser light, we do see a speckled appearance due to random interference. This sort of unique property of laser speckle has bruht into existence the new noncontaciting techniques such as speckle metrology method of measuring deformation, displacement, and vibration etc of objects with high optical sensitivity. The measurable range of speckle metrology especially used to measure in -plane information, however, is limited by some factors, the so-called strain, rotation tilt of surface and out of displacement perpendicular to the plane of analysis This restrictions severly limits the measurable range of speckle metrology by causing the decorrelation of speckle patterns. It is the purpose of this paper to give a survey on the measurable limitation of speckle photography method that is one of speckle metrology. Namely we will discuss the mutual relationships and problems of each limitations adding the restriction on the largest and smallest displacement measurable with speckle methods.

• 전기전자학회논문지
• /
• 제6권1호
• /
• pp.102-110
• /
• 2002

측정잡음이 시간에 순차적으로 상관된 경우의 동적 시스템에서의 다중 고장들을 검출하고 진단하는 효과적인 방법을 제시하였다. 제안된 고장검출 및 진단기법은 수정된 상호간섭다중모델 추정 알고리즘을 기반으로 하며 이것은 유색잡음에 대해 자기회귀 모델을 사용하고 측정 차분법을 적용함으로써 일반 비상관 프로세스를 설계하여 상호간섭다중모델 추정 알고리즘에 적용한 것이다.