• 방사성폐기물학회지
• /
• 제17권1호
• /
• pp.15-28
• /
• 2019

고리 1호기는 원전해체 계획에 따라 영구정지 이후 가능한 한 빠른 시일 내에 원자로냉각재계통의 화학제염을 수행할 계획으로, 계통제염 기술 확보를 위해 한수원에서는 2014년부터 '원전 해체설계를 위한 냉각재계통 및 기기제염 상용기술개발' 연구과제를 통해 화학제염기술을 개발하고 있다. 본 연구를 위해 Lab. 규모 계통제염 공정장치를 제작하였으며, 계통제염 대상의 주요재료인 STS304, 316, 410, Alloy600, SA508을 사용하여 화학제염 공정실험을 수행하였다. 화학제염 공정실험의 목적은 산화-환원공정의 최적시간, 최적제염제 및 공정횟수를 도출하기 위함이다. 화학제염 공정실험은 과망간산-옥살산 기반의 단위공정 및 연속공정 실험, 과망간산+질산-옥살산 기반의 연속공정 실험으로 나누어 수행하였다. 그 결과 단위공정실험을 통해 최적공정 시간인 산화공정 5시간, 환원공정 4시간을 도출하였으며, 연속공정실험을 통해 최적제염제와 공정횟수를 도출하였다. 최적제염제는 산화제의 경우 $200mg{\cdot}L^{-1}$ 과망간산 + $200mg{\cdot}L^{-1}$ 질산이고, 환원제는 $2000mg{\cdot}L^{-1}$ 옥살산이며, 공정횟수는 STS304와 SA508의 경우 2 cycle, Alloy600의 경우 3 cycle 이상 수행하는 것이 적절할 것으로 평가되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권1호
• /
• pp.84-94
• /
• 2007

As a reactor coolant pump(RCP) is operated in the nuclear power system for a long time. so its surface is continuously contaminated by radioactive scales. In order to perform regular or emergency repair about RCP internals a special decontamination process should be used to reduce the radiation from the RCP surface by means of chemical cleaning. In this study, applicable possibility in chemical decontamination for RCP was investigated on the various materials. The STS 304 showed the best electrochemical properties for corrosion resistance than other materials. However, the pitting corrosion was slightly generated in both STS 415 and STS 431 with the increasing numbers of cycle and intergranular corrosion were sporadically observed. The size of their pitting corrosion and intergranular corrosion were also increased with increasing cycle numbers.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2652-2660
• /
• 2021

The gamma-ray exposure doses in decontamination operation after a nuclear accident were evaluated with a consideration of various geometrical conditions and specific gamma-ray energies. The calculation domain is organized with three residence types and each form is divided into two kinds of geometrical arrangements. The position-wise air KERMA values were calculated with an assumption of evenly distributed gamma-ray source based on Monte Carlo radiation transport analysis using the MCNP code. The radioactivity is initially set to be unity to be multiplied by the deposition value measured in the actual accident condition. The workforce data set depending on the target object was determined by modifying the Fukushima report. The external exposure doses for decontamination workers were derived from the calculated KERMA values and the workforce analysis. These results can be used to efficiently determine the workforce required by the characteristics of the area and the structure to be decontaminated within the dose limits.

• 방사선산업학회지
• /
• 제9권4호
• /
• pp.217-221
• /
• 2015

When reactor coolant leaks occur due to cracks of a steam generator's tube, radioactive materials contained in the primary cooling water in nuclear power plant are forced out toward the secondary systems. At this time the secondary water purification resin in the ion exchange resin tower of the steam generator blowdown system is contaminated by the radioactivity of the leaked radioactive materials, so we pack this in special containers and store temporarily because we could not dispose it by ourselves. If steam generator tube leakage occurs, it produces contaminated spent resins annually about 5,000~7,000 liters. This may increase the amount of nuclear waste productions, a disposal working cost and a unit price of generating electricity in the plant. For this reasons, it is required to develop a decontamination process technique for reducing the radioactive level of these resins enough to handle by the self-disposal method. In this research, First, Investigated the structure and properties of the ion exchange resin used in a steam generator blowdown system. Second, Checked for a occurrence status of contaminated spent resin and a disposal technology. Third, identified the chemical characteristics of the waste radionuclides of the spent resin, and examined ionic bonding and separation mechanism of radioactive nuclear species and a spent resin. Finally, we carried out the decontamination experiment using chemicals, ultrasound, microbubbles, supercritical carbon dioxide to process these spent resin. In the case of the spent resin decontamination method using chemicals, the higher the concentration of the drug decontamination efficiency was higher. In the ultrasound method, foreign matter of the spent resin was removed and was found that the level of radioactivity is below of the MDA. In the microbubbles method, we found that the concentration of the radioactivity decreased after the experiment, so it can be used to the decontamination process of the spent resin. In supercritical carbon dioxide method, we found that it also had a high decontamination efficiency. According to the results of these experiments, almost all decontamination method had a high efficiency, but considering the amounts of the secondary waste productions and work environment of the nuclear power plant, we judged the ultrasound and supercritical carbon dioxide method are suitable for application to the plant and we established the plant applicable decontamination process system on the basis of these two methods.

• 방사성폐기물학회지
• /
• 제13권1호
• /
• pp.35-43
• /
• 2015

선행핵연료 주기관련 시설의 해체/복원 시 방사능으로 오염된 다량의 자갈폐기물이 발생할 수 있다. 하지만 현재 방사성 오염 자갈을 제염하기 위한 기초자료가 부족하므로, 본 연구에서는 토양세척법을 응용하여 방사능 오염 자갈을 제염하는데 필요한 기초실험을 수행하였다. 효율적인 제염을 위하여 제염제를 비교하여 선정하였는데, 우라늄으로 오염된 자갈의 제염제로는 증류수나 계면활성제보다 0.1 M의 질산을 사용하였을 때 제염이 잘 되었다. 또한, 제염효율을 높이고 제염시간을 단축하기 위하여 우라늄 오염 자갈을 파쇄/분쇄한 후 세척한 결과, 입자의 크기가 작으면 작을수록 제염효율이 높고 자체처분허용농도를 만족하는 것으로 나타났다.

• 방사성폐기물학회지
• /
• 제3권4호
• /
• pp.293-300
• /
• 2005

Type 304 stainless steel 시편에 느슨하게 붙어있는 $Eu_2O_3$ 분말에 대한 초음파 제염 거동을 조사하였다. 매질을 물, PFC 및 $0.1\;vol\%$의 음이온 계면활성제를 함유한 PFC 용액으로 변화시킴에 따라 제염계수는 20, 50 및 200으로 증가하였다. 제염계수에 차이가 생기는 이유를 초음파 매질의 표면장력 및 양으로 하전된 산화물 표면과 음이온 계면활성제 사이의 상호작용에 기인한 것으로 설명할 수 있었다. 음이온 계면활성제를 함유한 PFC 용액 내에서 $Eu_2O_3$ 분말로 오염된 평면 시편, 파이프 시편, 틈새 시편 및 용접 시편에 대한 초음파 제염 효과를 관찰하였다. 연구된 모든 시편에 대해, 대부분의 오염물이 완벽하게 제거되는 것으로 나타났다. 길이가 6cm인 파이프 시편에 대해서는 오염물의 $98.5\%$가 제거되었다.

• 방사성폐기물학회지
• /
• 제12권1호
• /
• pp.79-88
• /
• 2014

원자력이용시설에서 발생한 작은 크기의 금속 조각들을 효과적으로 제염하는 스마트 장치를 개발하였다. 이 장치는 자성연마재를 포함한 영역의 자속밀도를 연속적으로 변화시키는 방법과 초음파를 이용하는 다중 제염장치이다. 한편, 제염 효율을 높이기 위해 제염 장치가 제염 대상 전체에 작용하도록 장치들의 구성을 수정하였다. 개발된 장치들의 최적 작동조건을 도출하여 샘플로 선정한 소형의 금속방사성페기물에 대하여 자기장과 초음파제염을 각각 15분간 실시하였다. 그 결과 제염계수의 범위는18~56으로 크게 향상되었으며 제염 후 모든 샘플은 백그라운드(BKG)값 이하로 확인되었다.

• 한국표면공학회지
• /
• 제51권4호
• /
• pp.218-223
• /
• 2018

In this study, we proposed a new ultrasonic-chemical decontamination process for decontaminating radioactive corrosion products during the maintenance of reactor coolant pump (RCP). The actual decontamination process was reproduced in the laboratory. And the corrosion characteristics of stainless steel (STS), constituting the RCP interior parts, were examined. The weight-loss measurment and polarization experiment were carried out in order to determine the corrosion characteristics of STS 304 and STS 415 by repeated decontamination processes. The STS 304 presented a little corrosion damage, which was almost indistinguishable from visual observation. The weight-loss rate of STS 304 was also significantly lower. On the other hand, STS 415 showed severe corrosion damage on its surface, greater weight-loss rate and higher corrosion current density than STS 304.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3293-3298
• /
• 2022

Removing radioactive contaminated metal materials is a vital task during the decommissioning of nuclear power plants to reduce the cost of the post-dismantling process. The laser decontamination technique has been recognized as a key tool for a successful dismantling process as it enables a remote operation in radioactive facilities. It also minimizes exposure of workers to hazardous materials and reduces secondary waste, increasing the environmental friendless of the post-dismantling processing. In this work, we present a thorough and efficient laser decontamination approach using a single-mode continuous-wave (CW) laser. We subjected stainless steels to a surface-removal process that repetitively exposes the laser to a confined region of ~75 ㎛ at a high scanning rate of 10 m/s. We evaluate the decontamination performance by measuring the removal depth with a 3D scanning microscope and further investigate optimal removal conditions given practical parameters such as the laser power and scan properties. We successfully removed the metal surface to a depth of more than 40 ㎛ with laser power of 300 W and ten scans, showing the potential to achieve an extremely high DF more than 1000 by simply increasing the number of scans and the laser power for the decontamination of primary circuits.

• 한국군사과학기술학회지
• /
• 제16권4호
• /
• pp.560-565
• /
• 2013

Biological decontamination means the removal of microorganisms from the inanimate object such as building or equipment. In this study, hydrogen peroxide vapor efficacy test using VHP 1000ED system(Steris LifeSciences) were conducted for G. stearothermophilus spore with agent materials(aluminum, stainless steel, poly-carbonate, viton, silicone, kapton and glass). Total recovered spores exposed to hydrogen peroxide vapor(1.0 g/min) during 7, 15, 30, 60 min were calculated. As a result, all agent materials were totally decontaminated within 60 min at 1.0 g/min concentration with 35% hydrogen peroxide vapor. Finally, we could confirmed that hydrogen peroxide vapor possess sporicidal capacity of G. stearothermophilus and found the optimum decontamination conditions with VHP1000ED system.