• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.10
• /
• pp.553-558
• /
• 2000

This paper deals with change of contact angle, surface potential decay, surface resistivity and XPS of water-treated epoxy insulator. From the experimental results on the contact angle was reduced from $74^{\circ}$to $24^{\circ}$ due to the formation of polar hydroxyl groups on surface which was associated with intermolecular reaction between epoxy chains of three-dimensional network structure and water molecules. From the experimental results in the surface potential decay of water treated-samples, it was found that the accumulation of charge is decreased and the surface potential decay time is shortened by the interaction of polar hydroxyl groups induced on the treated surface as the increment of treatment time. The positive charging on the treated surface compared with negative charging is relatively lowered by the induction of polar hydroxyl groups. The surface resistivity was changed from $10^{15}[{\Omega}/cm^2$] to $10^{12}[{\Omega}/cm^2$] caused by water treatment. From XPS, it was found that the changes affected by the surface degradation of epoxy were caused by the generation of carboxyl groups through the chain decomposition and recombination with oxygen molecules in the air.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.105-108
• /
• 1998

In the present study, the luminescence characteristics and the effect of conductivity on cathodoluminescene of CaTiO$_3$:Pr was studied using dick specimens sintered at various temperatures and atmosphere. As a sintering temperature was increased from 1100 to 1400 $^{\circ}C$, conductivity of CaTiO$_3$:Pr phosphor was improved and CL brightness was also increased about four times and decay times was reduced from 0.29 to 0.21 msec. And all samples prepared in Ar showed high conductivity, CL brightness and short decay time in comparison with those sintered in air.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.5
• /
• pp.5-13
• /
• 2001

It is well known that there are two experimental errors on acoustic decay measurements. ,One is due to the influence of the band pass filter the other one is that of an averaging device. In this paper the influence of the filter is investigated in detail. To minimize the influence of the filter, the product of the filter bandwidth B (3dB bandwidth) and the reverberation time T/sub 60/ of the room under test should be at least 16. Moreover, if the initial part of an acoustic decay curve is important, the strong requirement, i. e. BT/sub 60/〉64, must be satisfied. In this paper, the wavelet filter bank instead of the band pass filter bank is applied to obtain an acoustic decay curve. As a result, the influence of filter is reduced and then the value of BT/sub 60/ required for obtaining an acceptable decay curve becomes at least 4. The strong requirement for the initial part of a decay curve is also replaced by the BT/sub 60/〉16 instead of BT/sub 60/〉64.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.12
• /
• pp.2230-2234
• /
• 2010

This paper deals with the change of surface potential decay, surface resistivity, contact angle and XPS of ultraviolet-treated PET films. From the experimental results on the surface potential decay of UV degraded-samples, it was found that the accumulation of charge is decreased and the surface potential decay time is shortened. Also, from the result of XPS, it was found that the changes affected by the surface degradation of PET film were caused by the generation of carboxyl groups through the chain decomposition and recombination with oxygen molecules in the air.

• Journal of the Korean Society of Safety
• /
• v.12 no.2
• /
• pp.65-69
• /
• 1997

Especially, Fiber glass Reinforced Plastics(FRP) is the best composite insulating material which has been so far. Therefore, it's worthy of notice to investigate on the corona electrified composite insulating material by surface condition. And then some other materials will be focussed on. In this study, charge decay were measured with charging-time and grid voltage on FRP composite material surface in order to analyze the mechanism. As a result we have studied that the way of the composite glass fiber(GF) and Polymer and the condition of the contaminated surface was different. In case of the GF is mixed with vertical, charge decay speed is fast because the charge is easily leaked. On the other hand, the surface charge decay speed is depend on conductive or insulated of the contaminant.

• Asian Journal of Turfgrass Science
• /
• v.11 no.4
• /
• pp.295-301
• /
• 1997

The cycle of heavy metal, copper, was investigated in dynamic grassland ecosystems at a steady state in a Zoysia japonica and a Miscanthus sinensis ecosystem in Mt Kwanak, Korea. Total average storage amounts in Z. japonica and M sinensis grasslands were copper 23.92mg /$m^2$ and 51.82mg /$m^2$ respectively. Estimates of decay constants for based on experimental and mathematical model, were 0.18 in Z. japonica grassland, and 0.30 in M sinensis grassland. Decay half time of copper were 3.85 years in Z. japonica grassland and 2.31 years in A'. sinensis grassland. 95% decay times of initial copper amounts in Z. japonica and A'. sinensis were 16.68 and 9.99 years. Needed times to decay almost all of elements in Z. japonica and M sinensis grassland were 27.80 years and 16.65 years respectively. The copper was losed more rapidly in M. sinensis than in Z. japonica grassland.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.1
• /
• pp.37-41
• /
• 2002

In this paper, we made shorter EDT(early decay time) of room reverberation curve using multiple-channel. The speech signal was processed inverse filtering with full-band and sub-band in the basis MINT, and then the multiple-channel adaptive filters were used LMS (Least Mean Square) and NLMS (Normalized Least Mean Square) algorithm. Experimental results, we could get 1/3 of time reduction at 20dB level in the reverberation curve using full-band NLMS when two microphones were used. Also, it is shown that the speech articulation was improved 80% from the test listeners with the speech, which was to shorten EDT by MINT in the subjective assessments using real room impulse response.

• The Korean Journal of Ecology
• /
• v.4 no.1_2
• /
• pp.38-51
• /
• 1981

The present investigation was estimated the effect of temperature, precipitatiion, and time on the decomposition of litters with litter bags of Pinus densiffora and Quercus mongolica at Gure where elevation in 50m, and at Nogodan where elevation in 1300m on Mt. Jiri. As the above results, decomposition model was proposed to relation of the environmental conditions. And was investigated the production and decomposition of litters from the stands of various forest communities in Kwangneung, Mt. Jiri and Mt. Halla. The results are as follows; The models for the decay of organic carbon (C) was as follows: $C=Coe^{-Kt}$ (limiting factor;time) $C=Coe^{-K'te}$ (limiting factor;tempedrature) $C=Coe^{-KnP}$ (limiting factor:precipitation) As observed in litter bag method, the decomposition rate of litter in Pinus densiflora was slower than that of Quercus mongolica. The higher elevation, the slower decomposition rate. The decomposition of litters at Gure where elevation in 50m was equally influenced by temperature and precipitation. But at Nogodan where elevation in 1300m was much inflenced by precipitation. The decay constant of litters was larger in hardwood forest than in coniferous forest. In the same species, the more elevatiion, the less decomposition constant. The time required for the decay of 50%, 95^, 99% of the accumulated litters in the forest floor were faster in hardwood forest than in coniferous forest. In the same species, the higher elevatiion, the longer time required.

• Journal of Environmental Health Sciences
• /
• v.27 no.1
• /
• pp.27-35
• /
• 2001

This aim of the work presented in this paper is to investigate the factors that affcet chlorine decay and to develop functional relationships that can be used to enhance the durability of network models. predictive relationships were established that correlated the rate of chlorine decay to the various water conditions such as DOC, N $H_3$-N, initial chlorine, contact time, temperature and pH values. Free chlorine residual decreased with increasing temperature, DOC, N $H_3$-N, reaction time and chlorine dose. At 2$0^{\circ}C$, pH 7, The initial chlorine demand per mg as DOC/L and mg as N $H_3$-N/L was about 0.43, 2.69 mg/$\ell$ respectively at 180 minutes contact time. The Reaction between chlorine and humic acids was lasted intil 48hr, but the reaction between chlorine and N $H_3$-N was almost completed in 180 min. When the temperature is raised by 1$0^{\circ}C$, chlorine is more consumed about 0.25 mg/$\ell$ in the absence of organic substances and it is more consumed about 3.4 mg/$\ell$ in the presence of humic acid (5 mg/$\ell$) in water at pH 7 for 180 min. Regression Analysis created the resulting prediction equation for the chlorine decay in a SPSS package of the computer system. The model is as follows; $C_{t}$=1.239+0.707(Co)-0.000529(Time)-0.0112(Temp)+0.02227(pH)-0.42(DOC)-2.132(N $H_3$-N).).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04c
• /
• pp.69-72
• /
• 2008

Decay processes of accumulated charge in e-beam irradiated polymers during elevating temperature are observed using pulsed electro-acoustic measurement system. Since the polymeric materials have many superior properties such as light-weight, good mechanical strength, high flexibility and low cost, they are inevitable materials for spacecrafts. In space environment, however, the polymers sometimes have serious damage by irradiation of high energy charged particles. When the polymers of the spacecraft are irradiated by high energy charged particles, some of injected charges accumulate and remain for long time in the bulk of the polymers. Since the bulk charges sometimes cause the degradation or breakdown of the materials, the investigation of the charging and the decay processes in polymeric materials under change of temperature is important to decide an adequate material for the spacecrafts. By measuring the charge behavior in e-beam irradiated polymer, such as polyimide or polystyrene, it is found that the various accumulation and decay patterns are observed in each material. The results seem to be useful and be helpful to progress in the reliability of the polymers for the spacecraft.