• Journal of the Korean Wood Science and Technology
• /
• 제42권6호
• /
• pp.732-739
• /
• 2014

본 연구는 최근의 기후변화가 국내 목재부후위험지수(Scheffer Index)에 미치는 영향을 파악하기 위하여 수행되었다. 국내 58개 장소에서 40년(1973~2012) 동안 축적된 기후자료를 활용하여 목재부후위험지수를 계산하였으며 기후 변화의 영향을 살펴보기 위하여 10년 간격으로 목재부후위험지수를 계산하였다. 제주도를 제외한 국내 대부분의 지역에서 목재부후지수는 35에서 65 사이로 목재부후위험이 중간 정도인 것으로 판명되었다. 그러나 최근 10년(2003~2012)의 경우 목재부후위험이 높은 곳(${\geq}65$)으로 구분할 수 있는 지역이 지난 30년(1973~2012)에 비하여 상당히 많아졌으며 전반적으로 목재부후위험지수가 급격히 증가한 것으로 나타났다. 이러한 경향은 국내 기후가 아열대성 기후와 비슷하게 변하는 과정에서 목재부후와 밀접하게 관련된 기후인자인 온도, 강우량 및 강우일수 등이 증가한 것에 의해 설명할 수 있다.

• 지역연구
• /
• 제31권2호
• /
• pp.47-61
• /
• 2015

이 연구의 목적은 수도권을 대상으로 입지를 변경한 기업들의 거리감쇄효과를 실증분석하는 것이다. 기업은 이전할 때 이전비용부담과 해당지역의 고객확보, 관련업체와의 협력 등으로 해당지역과 근접한 지역으로 재입지 하려는 경향을 나타낸다. 따라서 기업의 입지변경 시 이동거리는 기존 입지지역과 최대한 가까운 지역에 재입지하려는 거리감쇄효과가 발생한다. 본 연구는 수도권 소재의 서비스업과 제조업, 건설업 기업들의 기업이동 거리감쇄함수를 구축하고 그 효과를 실증분석하였다. 실증분석결과 서비스업과 제조업, 건설업 모든 기업의 거리감쇄효과가 있음을 확인하였으며, 구축한 거리감쇄함수의 설명력($R^2$)은 제조업은 .802, 서비스업은 .812, 건설업은 .728로 높은 설명력을 나타냈다. 이는 기업이동에 대한 거리감쇄효과가 있음을 실증한 것이며, 또한 건설업과 서비스업, 제조업 순서로 거리감쇄효과가 큼을 도출하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권6호
• /
• pp.880-889
• /
• 2016

To evaluate the resistance of wood to decay caused by fungi, sapwood and heartwood of red pine (Pinus densiflora) and sapwood and heartwood of larch (Larix kaempferi) were conducted. Wood samples were immersed for 96 h in pyroligneous liquor. Then, the brown-rot fungus, Fomitopsis palustris, was used to examine the decay resistance of red pine and larch. Weight and density of wood from the all conditions increased after immersion treatment. Weight loss after decay resistance test was also dropped with a immersion treatment. The lowest weight loss indicated at immersion-treated heartwood of larch. Immersion treatment using pyroligneous liquor effectively increased the resistance of wood to decay caused by fungi.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제12C권4호
• /
• pp.214-219
• /
• 2002

The influence of ultraviolet (UV) irradiation and corona on the surface degradation of high temperature vulcanized (HTV) silicone rubber used for outdoor insulation through measuring surface voltage decay after corona charging, surface resistivity, contact angle and X-ray photoelectron spectroscopy (XPS) analysis was studied. The surface resistivity calculated by the surface voltage decay was compared with a value directly obtained from the three electrode method having the guard ring electrode. A good agreement between the two methods for surface resistivity was obtained. UV treated specimens showed the slower decrease of surface voltage decay, while the corona exposed specimens showed a dramatically faster decrease. Although both artificial treatments cause the same oxidative products, which was confirmed with XPS, we could distinguish the difference between the reactions of the two treatments by monitoring the surface voltage decay on corona-charged specimen. In addition, we could derive the specific surface states of the silicone rubber treated by accelerated artificial aging factors and the degradation process.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 유기절연재료 방전 플라즈마연구회
• /
• pp.1-5
• /
• 2003

This paper presented the effects of accumulation of surface charges on hydrophobicity level and the surface states of silicone polymer used for outdoor insulator treated by ultraviolet irradiation and corona discharge through measuring surface voltage decay of a corona-charged specimen were investigated. The surface resistivity by the method of the surface potential decay was compared with the value by the three electrodes methods. From this study, it was found that the accumulation of surface charges above a critical surface voltage on silicone insulating materials could lead to the temporary loss of surface hydrophobicity. In addtion, uv stress lead to a longer decay time of surface charges. We could conclude that the effects of surface charges on hydrophocity level and the changes of surface state by various artificial treatments were understood through a trend of surface potential decay.

• 조명전기설비학회논문지
• /
• 제21권9호
• /
• pp.12-17
• /
• 2007

The dynamic false contour noise was analyzed with consideration for the phosphor decay time of an ac PDP by computer simulation based on the measurement of the 1/10 phosphor decay times of the primary colors red, green and blue at the main wavelengths of each phosphor. The noise level of dynamic false contour is strongly dependent on phosphor decay time. The noise level decreases incrementally with the phosphor decay time, whereas the noise width increases. The moving velocity of an object does not affect the noise level. The entire experiment was performed under the condition of 8 subfields ADS driving scheme, 2.5[${\mu}sec$] scan speed, and 5[${\mu}sec$] sustain period with VGA grade panel.

• 한국초전도ㆍ저온공학회논문지
• /
• 제2권1호
• /
• pp.31-34
• /
• 2000

this paper deals with the initial magnetic field decay for a large scale superconducting magnet e.g. NMR/MRI magnet. The high resolution image can not be obained during the periods of the initial field decay. It is known that all superconducting materials have the property of diamagnetism. This diamagnetism is usually explained with the concept of screening current. We assumed that the existence of the screening currebt. we assumed that the existence of the screening current makes the current distribution in the superconducting wire non-uniform. And the initial magnetic field decay is caused steady current state in the view of its pattern. The initial magnetic field decay is caused by the change of the current distribution between the energizing state and persistent current mode. in this paper the theoretical analysis for the current distributions has been introduced for each state. The experiments have been carried out to verify transport currents in order to veperiments, it small at the higher transport current.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.377-380
• /
• 2008

In this work, we measured the spatiotemporal surface charge distribution by the longitudinal electro-optic amplitude modulation method with BSO single crystal to investigate the decay and diffusion characteristics of surface charges in three types of MgO. The speed of decay and diffusion of two different kinds doped MgO is compared with those of pure MgO. The difference in the characteristics of the decay and diffusion between the electron and ion surface charges is investigated separately. We found that the rate of ion decay is the major factor that makes the difference of the temporal variation of wall voltage among different types doped MgO.

• Journal of the Korean Wood Science and Technology
• /
• 제24권2호
• /
• pp.1-6
• /
• 1996

This study was performed to investigate the feasibility of using sonic stress-wave technique in the longitudinal direction for the assessment of incipient decay of radiata pine wood. Decayed bending specimens by Tyromyces palustris and Gloeophyllum trabeum for varoious periods were tested nondestructively using stress-wave technique in the longitudinal direction and destructively. Decay detection, quantitative assessment of decay, and the prediction of residual strength of decayed wood with less than five percent weight loss can be feasible using stress-wave parameters (wave velocity, wave impedance, stress-wave elasticity) measured by stress-wave technique in the longitudinal direction and their percent reduction due to decay.

• 대한수학회지
• /
• 제38권1호
• /
• pp.147-162
• /
• 2001

This paper establishes exponential decay estimates for the solution of a stationary magnetohydrodynamics equations in a semi-infinite pipe flow when homogeneous lateral surface boundary conditions are applied.