• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.5
• /
• pp.219-225
• /
• 2018

In this paper, for the testing of tensile strength of dead-end clamp used in transmission line, resulting values were estimated by designing and producing the horizontal version of widely-used vertical tensile tester. Tensile strength test of dead-end clamp for transmission line is essential for quality test of products. Moreover, tensile tester is an equipment that requires high level of reliability which needs to be examined through sampling tests commensurate with total inspection. Frames of tensile tester were made up of H-beams so that it can endure more than 20 [tons] of load capability and the test was implemented for 60[seconds] applying five types of tension. In consequence, the tester could withstand up to 21,600[kg] of weight as well as all types of tension. This newly developed horizontal tensile tester can be utilized in figuring out properties of various materials by estimating tensile strength of materials such as metal, rubber and fiber.

• Membrane Journal
• /
• v.31 no.4
• /
• pp.282-292
• /
• 2021

In this work, we tested commercial organic solvent nanofiltration (OSN) membranes using both in-house dead-end and crossflow systems. Four different crosslinked polyimide Duramem (DM) OSN membranes with various MWCO (molecular weight cut off) values were tested in organic solvents such as ethanol, N,N-dimethylformamide, acetone and acetonitrile. The membranes exhibited more reliable and reproducible performance in the crossflow system, and the performance changed significantly depending in the physical properties of the testing solvent. This is due to the initial stabilization period via pressure-induced compaction phenomenon, which can be vastly different between membrane samples. Hence, to obtain reliable and reproducible results, crossflow system is the preferred choice.

• The Journal of Korean Medicine
• /
• v.26 no.2 s.62
• /
• pp.32-51
• /
• 2005

Objectives: To study the effect of Artemisiae Capillaris Herba extracts, that have been used as oriental medicine to treat liver disease, on the perinatal and lactational n;)productive toxicity of SD rats when administered by oral lavage. Methods: Female SD rats were dosed from 6 days of gestation to 3 weeks postpartum. This was conducted in accordance with the recommendations of the KFDA Guidelines for Detection of Toxicity to Reproduction for Medicinal Products. Results: No Artemisiae Capillaris Herba extracts treatment-related changes in clinical signs, mortalities, implantation number, dead fetus number, loss rate of fetus, number of live young, survival rate of fetus, sex ratio of live young, external anomalies, pregnancy periods, viability index, lactational index, survival rate of litters at 4 days after birth or delivery index were demonstrated in any dosed levels in this study. However, the body weight and gains, food consumption and absolute organ weights of brain, adrenal glands, liver, spleen, kidney, ovaries and heart were significantly increased in 2000 or 1000mg/kg-dosing groups and the relative organ Weights of adrenal glands were significantly increased in 2,000mg/kg-dosing groups. Therefore, it was concluded that this increase was natural according to growth. Also, no changes of gross findings, clinical signs, mortalities, body weight and gains, physical development results, necropsy findings, organ weight, faculty test, open filed test and water-filled simple T-maze test, copulation, fertility, pregnancy indices, body weight and gains during gestation periods, necropsy findings, corpora lutea number, implantation number, implantation rate, dead fetus number, post-implantation loss rate, live young, post-implantation survival rate, sex ratio of live young, external anomalies and individual body weights of live young were demonstrated in any dosed levels in this study. Conclusions: It is considered that the NOAEL (No-Observed-Adverse-Effect Level) for perinatal and lactational reproductive toxicity of Artemisiae Capillaris Herba extracts was up to 2000mg/kg/day because no changes of other perinatal and lactational reproductive indices were demonstrated.

• Membrane Journal
• /
• v.13 no.2
• /
• pp.81-87
• /
• 2003

The permeation experiments f3r the aqueous dextran solutions of which the molecular weights were distributed between several thousands and million daltons were carried out using the dead-end cell system equipped with sheet membrane to determine the molecular weight cut-off (MWCO) of ultrafiltration membranes. The dextran rejections with respect to molecular weight were obtained by GPC analysis of feed and permeate solutions, then the MWCO was decided as the dextran molecular weight corresponding to the 90% rejection. The MWCO of PBTK membrane manufactured by Millipore was varied between 63,000 and 68,000 daltons as the pressure increased from 0.5 to 2.0 bar. However, the MWCO of PBQK(Millipore) and UE 1812(Saehan) under the above operating pressure increased to 3.5 and 4.3 times, respectively. Also, the MWCO of PBTK increased to 25% as the membrane permeation increased from 10 to 40% of the feed solution.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.616-619
• /
• 2000

The optimum design of a structure requires to determine economical member size and shape of a structure which satisfies the design conditions and functions. In this study, it is attempted to minimize a dead weight of the bogie frame. Therefore, shape optimization is performed for a bolster rib at first and then size optimization for the thickness of top and bottom plate. For the efficient reduction of a weight of a bogie frame, various ellipses centered at a centroid of a bolster rib are made and tried. For the shape optimization, a major axis and an eccentricity of an ellipse are chosen as design variables. From the numerical results of shape and size optimization of a bogie frame, it is known that the weight can be reduced up to 12.476 Y4717.21 kg) with displacement and stress constraints.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.09a
• /
• pp.288-294
• /
• 2003

Increasing the volume of traffic on the roads causes social and economical problems such as increasing air-pollution and distribution cost. Prefabricated light weight bridge becomes a possible solution for these problems in the urban area where it is difficult to construct new one or expend the existing road. There are some merits in this kind of bridge. First, the design live and dead loads are minimized by allowing only passenger cars. Second employing prefabrication construction scheme reduces the construction time. Third, there is no need to buy land if the elevation road is placed on the top of existing one. In seismic design of bridges, base isolation has been an effective solution when the bridge has stiff piers and a heavy superstructure. The prefabricated light weight bridge has different dynamic characteristics from the ordinary bridges. In this paper, the applicability of base isolators such as lead rubber bearing and elastomeric bearing, to prefabricated light weight bridge is examined.

• Health Policy and Management
• /
• v.26 no.4
• /
• pp.352-358
• /
• 2016

Summary measures of population health (SMPHs) have been used to estimate the burden of diseases. Among various type of SMPHs, disability adjusted life year (DALY) and healthy life expectancy (HALE) have been calculated in the global and national burden of disease studies. In order to calculate DALY and HALE, disability weight is an essential element. Disability weights quantify the level of disability for health states or diseases and have values between 0 (full health) to 1 (being dead). In this study, we reviewed the main disability weights studies and determined their meaning and limitations. Furthermore, we provided the whole process of typical disability weight study and reviewed key issues as follows: health state or disease description development, panel composition, valuation method, validation of disability weight, cross-cultural variability in health state or disease, and so on. The results from this study will be helpful to conduct future disability weight studies for adapting disability weights and developing new methodologies.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.3
• /
• pp.65-71
• /
• 2002

From the definition of the cruise ship mission based on the investigation of the customer needs and statistical estimates and to design of the residence area of the cruise ship, in this study a conceptual design of the traditional ship parts (the lower hull) was carried out. for the light weight estimation of the cruise ship, several methods that have been used for commercial ships were evaluated to adapt for the cruise ship, the main particulars of the ship were determined with the light weight estimation and the assumed dead weight. From these main particulars of the ship, the hull form was developed with CFD verification and the general arrangement for the lower hull was achieved. For several loading conditions the intact stability of ship was checked.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.3
• /
• pp.35-46
• /
• 1999

Mathematical modeling provided a systematic analysis for the dynamic behavior of stock fluid in a paper machine pressurized headbox. Dynamic responses of liquid level, sheet basis weight and hydraulic pressure were predicted from the simulation model which represents the system. A unit step and asinusoidal wave load were considered as the input forcing functions in the headbox. Results are summarized as follows : 1. The dependence of sheet basis weight on liquid level in the pressurized-headbox was non -linear. 2. Liquid level in the head-box showed first-order lag with a unit step forcing to fluid input rate ; 3 . The amplitude of wave response of liquid level was inversely proportional to the time content for the sinusoidal input changes ; 4.Sheet basis weight showed second-order oscillating underamped responses for the step input load of flow rate ; 5. The damping factor in the second-order system was a function of air-pressure in the headbox ; and, 6. Dead-time existed in the measuring process for the headbox slice pressure.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.766-771
• /
• 1993

A mathematical model is developed to represent the batch reactor for free radical polymerization of PMMA The model is validated by comparing the simulation result with the experimental data. A computational scheme is proposed to determine the trajectory of the reactor temperature that will produce polymer product having the desired molecular weight distribution. For this instantaneous number average chain length and polydispersity are introduced to calculate the reactor temperature. The former is assumed to be a second order polynomial of the sum of the living and dead polymer concentrations. Various reactor temperature, trajectories are observed depending on the reactor conditions and prescribed molecular weight distributions. Fuzzy and PID control algorithms are applied to trace the reactor temperature trajectory. While the PID control gives rise to an overshoot when the trajectory changes its direction, the fuzzy controller yields a more satisfactory performance because it secures information on the trajectory pattern.