• 화약ㆍ발파
• /
• 제26권2호
• /
• pp.29-37
• /
• 2008

도로 및 철도 건설에서 적용되는 터널의 단면크기는 $50m^2$에서부터 $200m^2$의 중 대단면 터널이 주를 이루고 있으나, 전력구, 통신구, 광산용 터널, 용수를 위한 도수로터널 등 특수한 용도로 설계, 시공되고 있는 터널에서는 $20m^2$이하의 단면크기를 갖는 경우가 많다. 소단면 터널의 경우에는 협소한 작업공간으로 인하여 적용공법 뿐만 아니라 장비의 사용 또한 제약을 받게 되어 작업효율이 저하되고 공사기간이 늘어나게 되는 등 여러 가지 문제점을 안고 있다. 특히, 에멀젼 폭약을 사용하는 발파에서 먼저 기폭된 발파공의 충격압력에 의해 인접공의 폭약이 예비압축되어 사압현상을 일으키고 잔류약을 발생시키는 사례가 종종 발생하고 있다. 사압현상은 발파의 실패와 함께 2차적인 사고의 위험요인이 될 수 있으므로 이를 방지하기 위한 대책을 수립하여야 한다. 기존 문헌을 통하여 사압현상의 원인과 발생 가능성을 검토하였고, 사압현상이 발생한 소단면 터널현장을 대상으로 그 대책을 수립하여 적용하였다. 심발방법을 변경하여 전단의 충격압력을 견딜 수 있는 공간격을 확보하고 뇌관의 초시간격을 적절하게 배치한 발파패턴을 적용한 결과, 사암현상을 억제하고 잔류약의 발생을 감소시켜 계획 굴진장을 확보하였으며 파쇄석의 크기를 감소시키는 등 양호한 결과를 얻을 수 있었다.

• 한국생산제조학회지
• /
• 제20권2호
• /
• pp.129-132
• /
• 2011

This paper presents small hydrogen regulator for the mobile fuel cell. Mobile fuel cell is generally classified into open-end type and dead-end type. In the open-end type, flow rate of hydrogen is constantly controlled, while pressure of hydrogen is constantly maintained in the dead-end type. Considering the efficiency and stability of the fuel usage, dead-end type is more suitable with mobile fuel cell. Mobile fuel cell operated by dead-end mode requires hydrogen regulator which controls the hydrogen pressure from 0.1bar to 0.5bar within 3% error. In this paper, small hydrogen regulator (volume of 2.6cc) was fabricated by stainless steel. Regulation characteristics was experimentally evaluated.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권4호
• /
• pp.520-528
• /
• 2018

This paper presents the results of experimental investigation on the elastic-plastic response of steel unstiffened wedges with dead-rise $10^{\circ}$ subjected to repeated impulsive pressure loadings. Repeated drop tests were performed with both wedge thickness and drop height varied. The pressure and histories were recorded during the tests and the permanent deflections were measured after every drop. Using the recorded test result, the effects of flexibility of wedges and repetition have been investigated. From the pressure history obtained from the tests the characteristics of the impulses were identified. Numerical simulations of the tests were made using the measured pressure history and the permanent deflection predictions were compared with those of the experiments.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.46-51
• /
• 1999

This paper describes the control charcteristics of thermal/flow systems. In thermal/flow systems, the transport lag plays as a dead time causing a deterioration of the controllability. Besides this, such many parameters including the temperature, pressure, and flow rate affect the system response that a control scheme which can deal with multi-input is required. Particularly in a refrigerant compressor test facility, the evaporator and condenser interact each other so that the change in the evaporator pressure cause the condenser pressure to change or vice versa. Therefore, to control the evaporator pressure, not only the cooling water flow rate in the evaporator but also the coolant flow rate in the condenser is considered. Meanwhile, the conventional PID controllers, which is suitable for a single input system, shows a large overshoot for a disturbance input. In this work, the predictive control scheme is introduced and its applicability is discussed for thermal/flow systems.

• Fisheries and Aquatic Sciences
• /
• 제13권4호
• /
• pp.350-353
• /
• 2010

This study demonstrated that cryopreserved semen from dead fish can be used for seedling production. Yellow croakers, Larimichthys polyactis, were killed and stored at temperatures of $20^{\circ}C$ or $0^{\circ}C$ for 6 hours. At 2 hour intervals, semen from these fish was collected using abdominal pressure and evaluated for spermatozoa motility and semen cryopreservation. Semen collected after 6 hours from dead fish stored at $0^{\circ}C$ could be cryopreserved and attained fertilization and hatching rates of $15.0{\pm}1.2%$ and $14.8{\pm}1.6%$, respectively. This study suggests that germ cells such as the semen of dead fish can be cryopreserved and utilized in the restoration of a species.

• 설비공학논문집
• /
• 제17권6호
• /
• pp.552-559
• /
• 2005

This paper describes an experimental study on the inertance pulse tube refrigerator using a small compressor. The purpose of this experimental study is to identify the performance of the inertance pulse tube refrigerator for various operating conditions and to obtain the optimum configuration. The dead volume effect is verified by two experimental apparatuses with different dead volumes between the compressor and the aftercooler. The refrigerator of the smaller dead volume shows better performance. The influence of operating frequency and charging pressure on the performance of the refrigerator is experimentally investigated. Reducing the regenerator mesh size improves the performance of the refrigerator. Finally, the inertance pulse tube refrigerator has maximum cooling capacity at the specific combination of the pulse tube length and the inertance tube length. The loss analysis is used to analyze and predict the optimum condition of the pulse tube refrigerator.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.567-571
• /
• 2008

PEM Fuel Cell operation mode can be classified into dead-end mode or open mode by whether the outlet port is blocked or not. Generally, dead-end type fuel cell has some merits on the pressure drop and system efficiency because it can generate more power than the open type fuel cell due to high operating pressure condition. However, the periodic purging process should be done for removing water which is formed as product of a reaction in the gas diffusion layer. In this study, cathode side dead-end type operation has been conducted. Moreover, pulsating flow generator at the outlet of cathode side has been suggested for increasing the period to purge the formed water because the pulsating flow can make formed water scattered uniformly over the whole channel. As a result, the purging period with pulsation increased by 1.5-2 times longer than that without pulsating.

• 대한임상독성학회지
• /
• 제8권1호
• /
• pp.16-23
• /
• 2010

Purpose: Organophosphate insecticide poisoning is common in Korea, but there is no definitive guideline for determining the severity of the poisoning and the predictive factors. Therefore, we evaluated the organophosphate poisoned patients and we divided them into two groups, the survivors and the dead, and the results might be useful for treating organophosphate poisoning patients. Methods: We performed a retrospective analysis of 68 organophosphate poisoned patients who visited the Chosun University Hospital Emergency Medical Center during a 24-month period from January, 2007 to December, 2008. We made a work sheet of the patients' characteristics and the collected data was analyzed and we compared this data between the survivor group and the dead patient group. Results: There were significant differences between the survivor group and the dead patient group for the mean age, the alcohol intake state and the typically expressed signs. The dead patients had lower blood pressure, tachycardia and a lower Glasgo Coma Score (GCS) score than the survivor group. On the arterial blood gas analysis, the dead patients had more severe acidemia and they had lower saturations. Increased serum amylase levels were found in the dead patients. The survivors'initial and follow up serum pseudocholinesterase activity (after 6~8 days) was significantly higher than that of the dead group. The total amount of atropine injected to patient was less in the survivors than that in the dead patients. Conclusion: Old age and expressing the typical intoxication signs, a lower GCS score and blood pressure, showing acidosis on the gas analysis and low serum cholinesterase activity may be useful as poor prognostic indicators for patients with organophosphate poisoning. We suggest that physicians must pay careful attention to the signs and prognostic factors of organophosphate insecticide poisoned patients.

• 한국지반공학회지:지반
• /
• 제3권2호
• /
• pp.7-16
• /
• 1987

흙의 동적 특성은 공극비, 구속압력, 입도 등의 여러가지 요인에 의해서 변화한다. 본 연구에서는 모래의 입도가 그 동적 특성에 미치는 영향을 구속압력과 공극비의 영향과 함께 실험적으로 살펴 보았다. 실험 결과, 전단탄성계수(Shear Modulus)와 감쇠비 (Damping Ratio)는 공극비가 감소 함에 따라, 그리고 구속압력이 증가함에 따라 각카 증가 및 감소하였다. 한펀, 실트 크기의 석영분말을 섞어 입도를 변화시켰을 때, 시료의 전단탄성계수와 감쇠비는 석영 분말의 함유량이 증가함에 따라 각각 감소 및 증가하였다. 여기서는 이 현상을 "유효 접촉수"와 "사공간"의 개념을 써서 미시적으로 살펴보았다. 개념을 써서 미시적으로 살펴보았다.

• 한국자동차공학회논문집
• /
• 제8권5호
• /
• pp.114-120
• /
• 2000

Friction forces of piston rings for a typical SI engine were independently measured while excluding the effects of cylinder pressure, oil starvation and piston secondary motion using a floating liner system. Friction patterns, represented by the measured friction forces, were classified into five frictional modes with regard to the combination of predominant lubrication regimes(boundary, mixed and hydrodynamic lubrication) and stroke regions(mid-stroke and dead centers). The modes were identified on the Stribeck diagram of the dimensionless bearing parameter and friction coefficients which were evaluated at the mid-stroke and at the dead centers. And the frictional modes were estimated to the full operation range. The compression rings behave in the mode where hydrodynamic lubrication is dominant at the mid-stroke and mixed lubrication is dominant at the dead centers under steady operating conditions. However, the oil control ring behave in the mode where mixed lubrication is dominant throughout the entire stroke.