• 한국지진공학회논문집
• /
• 제7권5호
• /
• pp.11-17
• /
• 2003

일반적으로 토목구조물에서 계측된 가속도 신호의 대부분은 적분이 매우 힘들다. 그 이유는 토목구조에서 계측된 가속도 신호는 일반적으로 비정상신호이며 또한 비가우시안 노이즈와 저주파 노이즈를 포함하고 있어, 저주파 성분이 증폭되는 적분과정에서 수치적 불안정성이 발생할 수 있기 때문이다. 따라서, 본 논문에서는 비정상 신호처리에 탁월한 웨이블릿 변환의 개념을 비가우시안 노이즈와 저주파 노이즈에 대해 확장한 수정된 웨이블릿 변환을 이용한 가속도 기록의 이중 적분방법을 제시하였다. 또한, 예제해석을 통해 제시된 방법이 비정상 신호의 노이즈 및 비가우시안 노이즈와 저주파 노이즈를 제거에 우수한 성능을 보이고 있음을 보였다.

• Nuclear Engineering and Technology
• /
• 제31권2호
• /
• pp.192-201
• /
• 1999

This paper proposes an improved signal processing strategy for accurate feedwater flowrate estimation in nuclear power plants. It is generally known that ∼2% thermal power errors occur due to fouling Phenomena in feedwater flowmeters. In the strategy Proposed, the noises included in feedwater flowrate signal are classified into rapidly varying noises and gradually varying noises according to the characteristics in a frequency domain. The estimation precision is enhanced by introducing a low pass filter with the wavelet analysis against rapidly varying noises, and an autoassociative neural network which takes charge of the correction of only gradually varying noises. The modified multivariate stratification sampling using the concept of time stratification and MAXIMIN criteria is developed to overcome the shortcoming of a general random sampling. In addition the multi-stage robust training method is developed to increase the quality and reliability of training signals. Some validations using the simulated data from a micro-simulator were carried out. In the validation tests, the proposed methodology removed both rapidly varying noises and gradually varying noises respectively in each de-noising step, and 5.54% root mean square errors of initial noisy signals were decreased to 0.674% after de-noising. These results indicate that it is possible to estimate the reactor thermal power more elaborately by adopting this strategy.

• 한국공작기계학회논문집
• /
• 제14권3호
• /
• pp.96-102
• /
• 2005

Acoustic Emission(AE) technique has been applied to not only material characterization evaluation but also on-line monitoring of the structural integrity. The AE source location technique is very important to identify the source, such as crack, leak detection. Since the AE waveforms obtained from sensors are very difficult to distinguish the defect signals, therefore, it is necessary to consider the signal analysis of the transient wave-form. In this study, we have divided the region of interest into a set finite elements, and calculated the arrival time differences between sensors by using the velocities at every degree from 0 to 90. A new technique for the source location of acoustic emission in fiberboard plates has been studied by introducing Wavelet Transform(WT) do-noising technique. WT is a powerful tool for processing transient signals with temporally varying spectra. If the WT de-noising was employed, we could successfully filter out the errors of source location in fiberboard plates by arrival time difference method. The accuracy of source location appeared to be significantly improved.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 추계학술발표회요약집
• /
• pp.62.2-62
• /
• 2002

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.505-508
• /
• 2005

Wavelet scheme can be applied to the various remote sensing problems: conventional multi-resolution image analysis, compression of large image sets, fusion of heterogeneous sensor image and segmentation of features. In this study, we attempted wavelet-based filtering and its analysis. Traditionally, statistical methods and adaptive filter are used to manipulate noises in the image processing procedure. While we tried to filter random noise from optical image and radar image using Discrete Wavelet Transform (DW1) and Stationary Wavelet Transform (SW1) and compared with existing methods such as median filter and adaptive filter. In result, SWT preserved boundaries and reduced noises most effectively. If appropriate thresholds are used, wavelet filtering will be applied to detect road boundaries, buildings, cars and other complex features from high-resolution imagery in an urban environment as well as noise filtering

• 디지털산업정보학회논문지
• /
• 제4권1호
• /
• pp.47-53
• /
• 2008

Blocking artefact noise is necessarily happened in compressed images using block-coded algorithms such as JPEC compressing algorithm. This noise is more recognizable especially in highly compressed images. In this paper, an algorithm is presented for reduction of blocking artefact noise using block division. Furthermore, we also mention about the median filter which is often used in image processing.

• 한국안광학회지
• /
• 제17권2호
• /
• pp.203-207
• /
• 2012

목적: 다른 생체신호와 마찬가지로 망막전도(electroretinogram, ERG) 신호도 측정시 잡음이 발생한다. 이 잡음을 효과적으로 제거하여 망막관련 진단의 정확도를 높이고자 하였다. 방법: ERG 신호에 60 Hz 잡음과 백색잡음을 발생시켜 샘플링 신호를 만들었다. 웨이브렛 변환과 대역통과 필터를 이용하여 잡음를 제거하였다. 푸리에 변환 스펙트럼을 이용하여 제거된 주파수를 비교하였다. 신호대잡음비(signal to noise ratio, SNR)를 이용하여 제거된 잡음을 수치적으로 비교하였다. 결과: 푸리에 변환 스펙트럼을 비교한 결과 웨이브렛 변환에서는 60 Hz 잡음은 완전히 제거 되었으며 백색잡음도 많이 제거되었다. 대역통과필터에서는 60 Hz와 백색잡음 남아 있었다. 신호대잡음비를 비교한 결과에서는 웨이브렛 변환은 22.8638, 대역통과 필터는 4.0961로 나타났다. 결론: 웨이브렛 변환을 이용하여 잡음 제거시 신호의 왜곡을 적게 발생시켜 제거할 수 있었다. 망막전도 신호를 이용한 망막 진단에 정확도를 높일 수 있을 것으로 기대된다.

• 한국생산제조학회지
• /
• 제18권4호
• /
• pp.381-387
• /
• 2009

The end-milling force behaviour is very complex and it is related to a de-noising phenomenon, so it is very difficult to detect and diagnose this static cutting force phenomenon. This paper presents a new method of filtering of end-milling force in end-milling operation using filter bank technique, based on the wavelet transform. In this paper by comparing the history of end-milling force using wavelet filtering the fundamental end-milling property of the wavelet transform is well reviewed and analyzed. This result of wavelet transform using filter bank shows the possible static prediction of end-milling force with severe dynamic properties such as chatter in end-milling operation.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.792-794
• /
• 2014

통신 기술이 급속히 발달한 현대 사회에서 디지털 디스플레이, 카메라 등 영상장치들이 주를 이루고 있다. 그러나 영상 데이터의 전송, 저장, 획득하는 과정에서 재료, 매질 등 원인으로 영상에 잡음이 첨가되어 영상의 질을 저하시킨다. 본 논문에서는 영상에 첨가되는 AWGN(additive white Gaussian noise)의 영향을 억제하기 위하여 변형된 평균 필터 알고리즘을 제안하였다. 그리고 PSNR(peak signal to noise ratio)을 사용하여 기존의 방법들과 비교하였다.

• 한국군사과학기술학회지
• /
• 제4권1호
• /
• pp.147-154
• /
• 2001

The underwater explosion shock test is performed for the evaluation of the shock-resistant capability which is a very critical factor considering the survivability of the battle ship. Some measured signals have impulsive noise and gaussian white noise because of the unstable power supply system and the transient movement of cables during the underwater explosion shock test. The advanced shock signal analysis method which remove the noise of measured signal using the threshold policy of the median filter and the orthogonal wavelet coefficients are proposed. It is verified that the signal-to-noise ratio was improved about 30㏈ by the numerical simulation.