• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.287-297
• /
• 2016

This study aims to identify the relationship between climatic factors and stand mean Diameter at Breast Height (DBH) for two major tree species; Pinus densiflora and Quercus mongolica in Andong-dam basin. Forest variables such as age, diameter distribution and number of trees per hectare from the $5^{th}$ and $6^{th}$ National Forest Inventory data were used to develop a DBH estimation model. Climate data were collected from six meteorological observatory station and twelve Automatic Weather System provided by Korea Meteorological Administration to produce interpolated daily average temperature map with Inverse Distance Weighting (IDW) method. Andong-dam basin reflects rugged mountainous terrain, so temperature were adjusted by lapse rate based correction. As a result, predictions of model were consistent with the previous studies; that the rising temperature is negatively related to the growth of Pinus densiflora whereas opposing trend is observed for Quercus mongolica.

• Journal of Korean Society of Forest Science
• /
• v.78 no.4
• /
• pp.381-395
• /
• 1989

The main purpose of this research is to provide scientific informations about standard wage and performance tariffs in forest management with special reference to working time for thinning. To identify relationships between net working time and tree characteristics, three geographically different sample plots were established at Yangsan, Bongpyung and Jinan and 460 oaks, 372 Japanese larches, 232 red pine and 240 pitch pine mere selected at each sample plots. The results of statistical analysis using multiple regression are as follows ; 1. Five independent variables of breast height diameter(DBH), mid-diameter(MD) large end diameter(LD), log-length(L), No. of branches(NOB) were stable independent of worker and tree species. 2. Comparing correlation coefficient of five independent variables, the best predictive variables, breast height diameter and No. of branches, were selected. Breast height diameter and No. of branches were identified as the most important independent variables in terms of effect on the dependent variable of the working time. 3. Comparing coefficient of determination (Rp) and residual mean square (MSEp), the best Linear regression equation for each tree species was selected as follower : $WT=a+b1{\times}NOB+b2{\times}DBF$ 4. Proportion of hang-up time to total working time in thinning were 66% in oak stand, 74%, in Japanese larch stand, 55%, in red pine stand and 52% in pitch pine stand, respectively. 5. Based on the best regression equation, a table of working time was made by strata of number of branches and breast height diameter. 6. Total working time using the best regression equation in Table 5 can be predicted in terms of felling time, limbing time, hang-up time, i.e., total working time increases by 11 to 13 seconds with every 1 centimeter increase in breast height diameter from 7 to 16 centimeter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.734-739
• /
• 2018

The National Forestry Inventory of Korea has started the 7th (2016 ~ 2020) survey from the first (1972 ~ 1974) National Forest Situation Survey. The diameter at breast height was measured using a diameter tape, and the tree height was measured using a hypsometer in the National Forestry Inventory of Korea from the 1st to recently the 7th surveying. In the case of the diameter tape, however, irregularly shaped trees may cause a large error. In the case of a hypsometer, the height may be measured indirectly in 10 cm increments to the front edge of the tree, so that the accuracy may be lowered. This paper suggests the use of SLAM to improve the accuracy and advance forest investigations. For this purpose, a test bed for the measurement of DBH and tree height was set up, and the scan data was acquired directly using SLAM equipment. The accuracy of DBH and tree height measurements were analyzed. As a result, it was possible to calculate directly the DBH and tree height to 1mm unit, and it showed that the DBH accuracy of 2cm or less and the accuracy of the tree height accuracy of 1.3cm or less are sufficient for practical use. Based on the results, the scan data will be acquired for sample points and analyzed.

• Journal of Korean Society of Forest Science
• /
• v.100 no.1
• /
• pp.62-69
• /
• 2011

Six commonly used non-linear growth functions were fitted to individual tree height-dbh data of eight major tree species measured by the $5^{th}$ National Forest Inventory in Chungcheong province. A total of 2,681 trees were collected from permanent sample plots across Chungcheong province. The available data for each species were randomly splitted into two sets: the majority (90%) was used to estimate model parameters and the remaining data (10%) were reserved to validate the models. The performance of the models was compared and evaluated by $R^2$, RMSE, mean difference (MD), absolute mean difference (AMD) and mean difference(MD) for diameter classes. The combined data (100%) were used for final model fitting. The results showed that these six sigmoidal models were able to capture the height-diameter relationships and fit the data equally well, but produced different asymptote estimates. Sigmoidal growth models such as Chapman-Richards, Weibull functions provided the most satisfactory height predictions. The effect of model performance on stem volume estimation was also investigated. Tree volumes of different species were computed by the Forest Resources Evaluation and Prediction Program using observed range of diameter and the predicted tree total height from the six models. For trees with diameter less than 30 cm, the six height-dbh models produced very similar results for all species, while more differentiation among the models was observed for large-sized trees.

• Journal of Korean Society of Forest Science
• /
• v.112 no.1
• /
• pp.32-39
• /
• 2023

Using the logarithmic methods and the generalized method of moments (GMM), this study developed carbon storage equations for maple trees (Acer palmatum Thunb.) planted in an urban settlement area. A total of 20 maple trees of various ages and diameters were destructively harvested to determine their dry weight and carbon concentration by component. The allometric equations with DBH and DBH²×H as independent variables were developed to estimate the carbon storage for each tree component. The carbon concentration of tree components was the highest in stem wood (49.8%) and lowest in stem bark (46.5%). Allometric equations to estimate the carbon storage of tree components (stem, root, aboveground, and total) showed a similar coefficient of determinations (R²) between the allometric equations of the logarithmic method (0.7494-0.9036) and the GMM (0.7085-0.8847). However, the R² values of the leaves and branches were in the range of 0.3027 to 0.6380, lower than those of the R² of the other tree components. These results indicate that the carbon storage of maple trees growing in urban settlement areas can be efficiently predicted from the equations of GMM methods in the case of a small sample size or the heteroscedasticity of logarithmic equations.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.6
• /
• pp.61-72
• /
• 2008

This study was carried out to analyze vegetation and soil characteristic of Osmanthus insularis community, Geomundo. The Osmanthus insularis community was classified into three subcommunities: Mallotus japonicus subcommunity, Ficus erecta subcommunity, Raphiolepis umbellata subcommunity. The importance value of Camellia japonica, Osmanthus insularis, Ligustrum japonicum, Litsea japonica Mallotus japonicus, Pinus thunbergii and Ficus erecta in Osmanthus insularis community were 76.11%, 75.91%, 37.24%, 21.99%, 18.35%, 17.64% and 11.91%, respectively. According to the DBH analysis. Osmanthus insularis showed formality distribution style among the entire community. Their dominance is expected to continue. But the young plant individual were low density, importance value reduced. In the study sites, soil organic matter, nitrogen, available phosphorous and soil pH were ranged from 19.11~24.62%, 0.73~1.18%, 11.61~27.98mg/kg and 6.11~6.37, respectively. According to the result of survey Osmanthus insularis individual, the female plants individual were 57.90%, the male plants individual were 42.10%.

• Journal of Korean Society of Forest Science
• /
• v.96 no.5
• /
• pp.567-571
• /
• 2007

This study was conducted to clarify the differences in breeding bird communities between deciduous forests of Gwangneung and Mt. Namsan areas from April to August 2006. Two 10ha area were selected for territory mapping of breeding bird community in both study area. The DBH distribution of trees and average foliage profiles were significantly different between study areas. Also, breeding bird communities were different. Number of breeding species and pairs, breeding density, and bird species diversity were higher in Gwangneung area than in Mt. Namsan area. When examining relationship between forest habitat structure and bird community, Number of bird species and breeding pairs belonged to hole and canopy guild were increase as the increase of coverstory coverage and number of large trees. Therefore, it is necessary to make vertical structure more various to plant bushes, and to make DBH distribution more diverse for enhancing bird species diversity in the degraded ecosystem.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.5
• /
• pp.38-46
• /
• 2004

This study was carried out to analyze forest vegetation in Seodaesan of Geumsan, Chungnam Province. Employing the releve method of Braun-Blanquet and quadrat method, 36 plots were sampled in forest of Seodaesan. The sub-communities were classified into Pinus densiflora, Acer pseudosieboldianum, and Carpinus laxiflora sub-community of Quercus mongolica community. The importance values were 77.07 in Quercus mongolica, 40.79 in Pinus densiflora, 17.03 Fraxinus rhynchophylla, 14.06 in Fraxinus sieboldiana, 13.99 in Quercus serrata, 12.93 Acer pseudosiebotdianum. Coverage rate was 84.6% in tree layer, 52.8% in subtree layer, 29.1% in shrub layer, 27.9% in herb layer, respectively. Most of the DBH of Quercus mongolica and Pinus densiflora was between 5cm and 20cm. Therefore, Quercus mongolica and Pinus densiflora might be dominant species in the study area for several decades. Acer pseudosieboldianum and Carpinus laxiflora sub-communities were distributed mainly in a high-altitude and northern and north-western area. Pinus densiflora sub-community was distributed mainly in a low-altitude and western area.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.2
• /
• pp.65-71
• /
• 2002

The best environments such as crown density, temperature, light intensity and humidity have to be identified because these factors are strongly related to the growth and several physiological characteristics. The purposes of this study are \circled1 to collect basic data fer growth, \circled2 to identify the best growth environments. to achieve these purposes, oak, pine and mixed forest stands have been selected in this study. forest ginseng seeds were sown in these forest four years ago. Several environmental and growth factors have been surveyed. In general, mean tree age, DBH and average height are 20-25 years old, 14-17 cm and 7-9 m, respectively. The growths of forest ginseng grown in oak stand are better than those of pine and mixed stands.

• Korean Journal of Environment and Ecology
• /
• v.8 no.1
• /
• pp.58-67
• /
• 1994

Object of this study is to suggest the plan for natural vegetation restoration and management by ecological approach. The concept of biotope planting technique was introduced in order to restore the natural vegetation in the northern part of Mt. Nam in Seoul, and Quercus mongolica forests was surveyed so as to obtain the basic data. This study focused on the vegetational context between northern part of Mt. Nam and develop-reserved site. The results are following ; 1. It is suitable to plant 25~30 trees in $100\m^2$ with trees of DBH 10cm and below at intervals of about 2m in canopy layer. In the case of subtree layer of DBH 2cm, about 30 trees were planted at an Intervals of 1.5~2m around in $100\m^2$. 2. In the last step of nature vegetation restoration, it is desiable that canopy density is $5/100\m^2$ and 녀btree one is 10~20/$100\m^2$. 3. Management plans was proposed to use the native species of Mt. Nam around and to investigate the ecological situation once a year such as species introduce, dead-tree, soil, fauna etc.