• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2007년도 춘계학술대회
• /
• pp.75-83
• /
• 2007

본 논문에서는 .NET 기반의 Remoting 시스템과 Socket 통신을 이용하여 이 기종 DB Server 간의 Data 동기화를 구현하였다. 이 시스템은 Client 의 웹 브라우저를 이용 Socket 통신으로 Data를 전송하여 데이터베이스에 저장하는 방식으로 구현하였고, Data 읽기는 Remoting 기술인 중계 어플리케이션 서버의 클래스를 원격으로 실행시켜 Data를 가져오는 방식으로 구현하였다. DB 동기화는 Data를 저장할 때 중계 어플리케이션 서버와 DB 서버의 Data 관리 어플리케이션 간 비동기 통신으로 DB 서버의 Data 처리 수준을 실시간으로 감시하여 중계 어플리케이션 서버에서 선택적으로 Data를 전송하고, 이후 Data 처리 수준이 정상화기 되면 다시 Data를 전송케 함으로써 이 기종 DB 서버간의 동기화를 구현하였다. 본 논문은 1 장에 서론, 2 장에 .NET Remoting 기술과 네트워크 프로그래밍, 3 장에 이 기종 DB 서버 간 동기화 시스템 설계 및 구현, 4 장에 결론을 기술하였다.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3837-3851
• /
• 2021

To investigate how the fabrication and repair of socket welded joints could be used to enhance fatigue resistance under vibration condition, experimental test data of installation conditions that potentially influence fatigue strength were analyzed with the S-N curve. It was found that the decreasing fatigue strength of stainless steel socket welded joints was attributed to the effect of high heat input of welding process. The effect of welding method, slip-on gap and radial-gap conditions on fatigue strength was insignificant. The test data of repair technique application, 2 × 1 leg length and of socket weld overlay, clearly showed higher fatigue strength but there was a limitation for higher stress region because of the weld toe crack.

• 한국정보통신학회논문지
• /
• 제17권4호
• /
• pp.885-892
• /
• 2013

TCP/IP소켓 통신을 활용하여 데이터를 송수신하는 송수신 모델에서 데이터의 크기가 작고 데이터 전송 요청이 빈번하지 않을 경우 서버와 클라이언트 간 통신 속도의 중요성은 부각되지 않지만 오늘날 대용량 데이터에 대한 전송 요청과 빈번한 데이터 전송 요청에서 송수신 모델의 통신 속도에 대한 중요성이 부각되고 있다. 본 논문은 대용량의 데이터를 전송하는 서버의 전송 구조와 데이터를 수신하는 클라이언트의 수신 구조를 변경하여 멀티 코어(이하 CMP : ChipMulti Processor) 환경에서 데이터 전송 속도에 대한 성능향상을 기대할 수 있는 보다 효율적인 TCP/IP 송수신 모델을 제안한다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.369-372
• /
• 1997

Socket pressure distributions with gait analyses of a transfemoral and a transtibial prostheses were measured in order to assess an optimal socket fitting and unction. Ankle joint was aligned by the neutral and the dorsi/plantar flexed positions. Compared to dorsi and plantar flexed positions of ankle joint, cadence and walking speed increased with the neutral ankle joint alignment. Other gait parameters were close to the normative data with the neutral ankle joint alignment. For the transfemoral amputee, dorsiflexed alignment of the ankle joint created high pressure on the lateral aspect of the socket, on the other hand, plantarflexed alignment resulted in increased pressure on the medial aspect of the socket. For the transtibial amputee, dorsiflexed alignment of the ankle resulted in high pressure on the antero-lateral aspect of the socket during mid-stance, but plantarflexion of the ankle joint showed slight increases in pressure at the same location in the socket. The present study clearly demonstrated that malalignment of a prosthesis results in localized increasing pressure within the socket. Proper alignment of the prosthesis is required in order to acquire an appropriate socket-limb interface as well as the proper gait.

• 조명전기설비학회논문지
• /
• 제29권12호
• /
• pp.47-54
• /
• 2015

Normally, multiple socket-outlet is manufactured with soldered, welded permanent connection (termination). Because this procedure is very non-environmental and requires many labor forces, many companies skip this process. To solve this these problems, this research had to design permanent joint type multiple socket-outlet, develop safer multiple socket-outlet than is sold in markets. Progressing this research, we took 3 steps. First, we had to design device for fixing a frame suitable for multiple socket-outlet. Second, this multiple socket-outlet must pass fundamental standards through international standard (IEC 60884-1) and Korean standard (K 60884-1) tests. Third, it had to pass both several mechanical and electrical tests which is more strict than fundamental standards and vibration and impact tests following KS standards for enhancing its safety. After finishing 3 steps, we could obtain objective and fair data, develop environmental permanent joint type multiple socket-outlet without soldering crimped connection.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.153-155
• /
• 2006

An automatic remote water measurement system was developed. This system sends automatic remote measured and collected water meters data automatically from the transmitter with CDMA modem through SK-Telecom network The water meter data are received through LAH TCP/IP and displayed as test file on IE(Internet Explorer) window. The existing water meters of mechanical type have so many problems to measure data. The person must visit the location of each water meters and write down the data records manually. In this system the RF module has attached each water meter Client/Server programs are developed by network socket programming.

• 한국안전학회지
• /
• 제34권5호
• /
• pp.22-30
• /
• 2019

In 2018, overload, overcurrent, insulation aging, and a contact failure caused 659 electric fires. There is almost no failure of electrical socket outlets during their manufacturing or installation period. After several months or several years, overload or overcurrent of electrical socket outlets leads to a contact failure or short circuit which causes an electric fire. Therefore, this paper analyzed for thermal characteristics based on a current value and the change in insulation resistance along with a temperature rise caused by electrical socket outlets and the state of laboratory use in workplaces. As a results, regarding the thermal characteristics based on the current value of each installation year, a temperature increase was related to a current value, an installation year, and whether the contact unit is corroded. Insulation resistance began to decrease when a temperature increased to a certain level. With a lapse of installation year, the temperature at which insulation resistance began to decrease was lowered. This paper can be applicable for the survey data about electrical socket outlet induced fire accidents and management guidelines.

• 한국재료학회지
• /
• 제18권11호
• /
• pp.592-596
• /
• 2008

Spring constants (displacement per unit applied load) of MEMS socket pins of given structures were computed by theoretical analysis and confirmed by the finite element method (FEM). In the theoretical analysis, the displacement of pins was calculated based on the 2-dimensional bending theory of the curved beam. For the 3-dimensional modeling, CATIA was used. After modeling, the raw data were transferred to ANSYS, which was employed in the 3-dimensional analysis for the calculation of the stress and strain and loaddisplacement The theoretical analysis and the FEM results were found to agree, with each showing the spring constants as 63.4 N/m within a reasonable load range. These results show that spring constants can be easily obtained through theoretical calculation without resorting to experiments and FEM analysis for simple and symmetric structures. For the some change of shape and structural stiffness, this theoretical analysis can be applied to MEMS socket pins.

• 디지털융복합연구
• /
• 제11권8호
• /
• pp.367-373
• /
• 2013

모바일SNS 소통의 새로운 패러다임으로 자리 잡아가고 있다. 최근, 모바일 환경에서 클라이언트 어플리케이션을 이용하여 서버와 통신을 한다. TALK나 PUSH는 메시지나 데이터 소켓을 거쳐 운영체제 상에 존재하는 TCP/IP 소프트웨어를 통해 서비스를 제공하고 있다. 이렇듯 SNS와 모바일 융합은 필연적이며 SNS의 플랫폼을 통해 새로운 서비스를 구축하고 있다. 본 논문에서는 소켓방식을 이용한 위치기반 SNS을 연동하여 클라이언트간의 TALK 및 PUSH 서비스를 설계 및 구현하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권1호
• /
• pp.78-85
• /
• 2014

하이브리드 통신을 지원하는 하이브리드 통신 신호처리 제어보드는 저전력의 32-bit 마이크로콘트 롤러인 Cortex M3로 설계하였다. 마이크로콘트롤러는 하이브리드 통신을 위한 모뎀과 GPS 모듈 등을 직렬 인터페이스하기 위한 UART 포트가 갖추어져 있으며, CLI(Command Line Interpreter) 프로그램은 각 포트의 인터페이스를 사용자 환경에 맞게 설정할 수 있다. 항로표지 원격관리 시스템에 사용되는 하이브리드 통신 신호처리 제어보드의 전송방식을 단문메시지 방식과 소켓 방식을 비교한 결과 소켓 방식의 우수함을 입증하였으며, 수신 성능의 개선을 통해 항로표지 원격관리 시스템의 데이터 손실을 최소화될 수 있도록 하였다. 실험은 12시간 동안 각 부표에서 매 1분마다 데이터를 취득하였으며, 데이터 수신율은 각각 98.58 %와 99.42 % 이상을 보였다.