• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2007.05a
• /
• pp.75-83
• /
• 2007

본 논문에서는 .NET 기반의 Remoting 시스템과 Socket 통신을 이용하여 이 기종 DB Server 간의 Data 동기화를 구현하였다. 이 시스템은 Client 의 웹 브라우저를 이용 Socket 통신으로 Data를 전송하여 데이터베이스에 저장하는 방식으로 구현하였고, Data 읽기는 Remoting 기술인 중계 어플리케이션 서버의 클래스를 원격으로 실행시켜 Data를 가져오는 방식으로 구현하였다. DB 동기화는 Data를 저장할 때 중계 어플리케이션 서버와 DB 서버의 Data 관리 어플리케이션 간 비동기 통신으로 DB 서버의 Data 처리 수준을 실시간으로 감시하여 중계 어플리케이션 서버에서 선택적으로 Data를 전송하고, 이후 Data 처리 수준이 정상화기 되면 다시 Data를 전송케 함으로써 이 기종 DB 서버간의 동기화를 구현하였다. 본 논문은 1 장에 서론, 2 장에 .NET Remoting 기술과 네트워크 프로그래밍, 3 장에 이 기종 DB 서버 간 동기화 시스템 설계 및 구현, 4 장에 결론을 기술하였다.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3837-3851
• /
• 2021

To investigate how the fabrication and repair of socket welded joints could be used to enhance fatigue resistance under vibration condition, experimental test data of installation conditions that potentially influence fatigue strength were analyzed with the S-N curve. It was found that the decreasing fatigue strength of stainless steel socket welded joints was attributed to the effect of high heat input of welding process. The effect of welding method, slip-on gap and radial-gap conditions on fatigue strength was insignificant. The test data of repair technique application, 2 × 1 leg length and of socket weld overlay, clearly showed higher fatigue strength but there was a limitation for higher stress region because of the weld toe crack.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.885-892
• /
• 2013

In the model Utilizing the TCP / IP socket communication to transmit and receive data, if the size of data is small and if data-transmission aren't frequently requested, the importance of communication speed between a server and a client isn't emphasized. But nowadays, it has emerged for large amounts of data transfer requests and frequent data transfer request. This paper propose the TCP/IP communication model that can be improved the data transfer rate in multi-core environment by changing the receiving structure of the client to receive large amounts of data and the transmission structure of the server to send large amounts of data.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.369-372
• /
• 1997

Socket pressure distributions with gait analyses of a transfemoral and a transtibial prostheses were measured in order to assess an optimal socket fitting and unction. Ankle joint was aligned by the neutral and the dorsi/plantar flexed positions. Compared to dorsi and plantar flexed positions of ankle joint, cadence and walking speed increased with the neutral ankle joint alignment. Other gait parameters were close to the normative data with the neutral ankle joint alignment. For the transfemoral amputee, dorsiflexed alignment of the ankle joint created high pressure on the lateral aspect of the socket, on the other hand, plantarflexed alignment resulted in increased pressure on the medial aspect of the socket. For the transtibial amputee, dorsiflexed alignment of the ankle resulted in high pressure on the antero-lateral aspect of the socket during mid-stance, but plantarflexion of the ankle joint showed slight increases in pressure at the same location in the socket. The present study clearly demonstrated that malalignment of a prosthesis results in localized increasing pressure within the socket. Proper alignment of the prosthesis is required in order to acquire an appropriate socket-limb interface as well as the proper gait.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.12
• /
• pp.47-54
• /
• 2015

Normally, multiple socket-outlet is manufactured with soldered, welded permanent connection (termination). Because this procedure is very non-environmental and requires many labor forces, many companies skip this process. To solve this these problems, this research had to design permanent joint type multiple socket-outlet, develop safer multiple socket-outlet than is sold in markets. Progressing this research, we took 3 steps. First, we had to design device for fixing a frame suitable for multiple socket-outlet. Second, this multiple socket-outlet must pass fundamental standards through international standard (IEC 60884-1) and Korean standard (K 60884-1) tests. Third, it had to pass both several mechanical and electrical tests which is more strict than fundamental standards and vibration and impact tests following KS standards for enhancing its safety. After finishing 3 steps, we could obtain objective and fair data, develop environmental permanent joint type multiple socket-outlet without soldering crimped connection.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.153-155
• /
• 2006

An automatic remote water measurement system was developed. This system sends automatic remote measured and collected water meters data automatically from the transmitter with CDMA modem through SK-Telecom network The water meter data are received through LAH TCP/IP and displayed as test file on IE(Internet Explorer) window. The existing water meters of mechanical type have so many problems to measure data. The person must visit the location of each water meters and write down the data records manually. In this system the RF module has attached each water meter Client/Server programs are developed by network socket programming.

• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.22-30
• /
• 2019

In 2018, overload, overcurrent, insulation aging, and a contact failure caused 659 electric fires. There is almost no failure of electrical socket outlets during their manufacturing or installation period. After several months or several years, overload or overcurrent of electrical socket outlets leads to a contact failure or short circuit which causes an electric fire. Therefore, this paper analyzed for thermal characteristics based on a current value and the change in insulation resistance along with a temperature rise caused by electrical socket outlets and the state of laboratory use in workplaces. As a results, regarding the thermal characteristics based on the current value of each installation year, a temperature increase was related to a current value, an installation year, and whether the contact unit is corroded. Insulation resistance began to decrease when a temperature increased to a certain level. With a lapse of installation year, the temperature at which insulation resistance began to decrease was lowered. This paper can be applicable for the survey data about electrical socket outlet induced fire accidents and management guidelines.

• Korean Journal of Materials Research
• /
• v.18 no.11
• /
• pp.592-596
• /
• 2008

Spring constants (displacement per unit applied load) of MEMS socket pins of given structures were computed by theoretical analysis and confirmed by the finite element method (FEM). In the theoretical analysis, the displacement of pins was calculated based on the 2-dimensional bending theory of the curved beam. For the 3-dimensional modeling, CATIA was used. After modeling, the raw data were transferred to ANSYS, which was employed in the 3-dimensional analysis for the calculation of the stress and strain and loaddisplacement The theoretical analysis and the FEM results were found to agree, with each showing the spring constants as 63.4 N/m within a reasonable load range. These results show that spring constants can be easily obtained through theoretical calculation without resorting to experiments and FEM analysis for simple and symmetric structures. For the some change of shape and structural stiffness, this theoretical analysis can be applied to MEMS socket pins.

• Journal of Digital Convergence
• /
• v.11 no.8
• /
• pp.367-373
• /
• 2013

Mobile SNS is a new paradigm of the communication. These days, mobile services communicate with server by client applications. TALK or PUSH provide services using TCP/IP software in operation system through massage or data by socket. Thus, SNS and mobile convergence are necessary and new service is constructed using platform of SNS. In this paper, we design and implement TALK and PUSH services between clients by location based SNS using the socket type.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.78-85
• /
• 2014

The Mu-communication board supported by hybrid communication is designed with Cortex M3, which is a low power energy consumption 32-bit microcontroller. The Cortex M3 microcontroller has UART(Universal asynchronous receiver/transmitter) ports which can set appropriately using the command line interpreter (CLI) program with each port. URAT ports are used for hybrid communication modems, GPS modules, etc. When the socket type was compared with the short message service type, the socket type was proven to be better. By improving the receiving performance in the control and management system of the AtoN, data loss was minimized. During the testing of the socket and SMS, data was collected from each buoy for 12 hours every 1 minute and the receiving rate of the data was found to be more than 98.58 % and 99.42 % respectively.