• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.3
• /
• pp.201-207
• /
• 2000

In this study, methodologies for checking the interference between in-core instrumentation (ICI) guide tubes for routing of ICI guide tubes in the reactor coolant system of typical Pressurized Water Reactor under cold and normal operation (NOP) conditions are presented. The closest points of ICI guide tubes under cold condition are calculated by using minimize technique and are used as data for NOP analysis. Movements of ICI guide tubes under NOP condition are performed by the commercial computer code, SUPERPIPE.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.2
• /
• pp.19-24
• /
• 2022

The purpose of this research is to determine the hardness of guide hole. A guide pin and a guide hole of SSD(Solid State Drive) tester used to mount SSD in a fixed position accurately. The guide pin and guide hole are worn by friction due to repeated operation, and the wear is concentrated on the guide hole made of weak material rather than the guide pin made of relatively strong material. Because of that reason, it is often overdesigned in the design stage because it can lose its function. If the guide hole is made soft, the manufacturing cost will decrease, but the accuracy will decrease due to wear caused by repeated friction. If the guide hole is manufactured excessively, the manufacturing process becomes complicated and the manufacturing cost increases. It is essential to design a guide hole, but since there is no standard or verified data that can be referenced, it is difficult to design. Experimental device which guides in the same way as the SSD tester is used for this research, and three types of anodizing state are experimented for different hardness. Also, weight of COK(Change over Kit) were analyzed by measuring the wear amount and state of the guide hole according to the number of repeated attachment and detachment.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.4
• /
• pp.216-224
• /
• 2013

Facility data is created throughout the design and construction phase. But the most facility managers bear significant costs that arise from the lack of interoperability with facility lifecycle. This paper is concerned with the way to collect facility data using BIM technology. The aim of this paper is to suggest BIM data modeling guide for the facility management using the information that need to be delivered from design and construction phase to operation and management phase. The BIM data modeling guide focus on the properties of mechanical equipment. It is to be hoped that this study will contribute to collect facility data from as-built BIM data and to build facility management system database without difficulty.

• Asian Journal of Innovation and Policy
• /
• v.8 no.3
• /
• pp.343-361
• /
• 2019

The Practical Guide of Technology Valuation (the guide) by the Ministry of Industry, Trade and Energy is dominant in technology valuation in the public sector in Korea. The guide was released in 2011 and revised every three years. However, there are several guidelines or manuals for technology valuation issued by other agencies under different ministries. This paper compares the several guidelines for technology valuation and figures out the similarity and differences, from the view of the US and international standards of valuation. The first aspect found is that the guide is evolving toward the basic principles of valuation. Second, all the guidelines should comply with the guide but have sector-specific characteristics in methods, variables and data. Third, although the guide recommends only two valuation methods, some guidelines introduce various other methods. Fourth, the methods are still too complex and having unnecessary ingredients. Finally, this paper suggests further development of the guide and other guidelines.

• Journal of Korean Academy of Nursing Administration
• /
• v.14 no.1
• /
• pp.45-50
• /
• 2008

Purpose: This study was intended to determine how an in-patient guide movie enhanced the understanding of hospital life. Method: A non-equivalent control group post-test design was used for the study. The experimental group was allowed to watch the in-patient guide movie. The in-patient guide booklets were given to the control group for reading. The understanding and satisfaction of the respective programs were surveyed with questionnaires. The data was analyzed using SPSS. Result: The movie watching experimental group had better understanding on the hospital life than the booklet reading control group. The movie watching group had more satisfaction with the guide program than the booklet reading group. The understanding of the hospital life and satisfaction with the program had relevance. Conclusion: This study suggests that the in-patient guide movie would help the would-be in-patients understand and adapt to the hospital life better. Therefore, the in-patient guide movie is considered to be a useful medium to educate in-patients for their hospital life.

• Journal of Korea Multimedia Society
• /
• v.13 no.12
• /
• pp.1814-1819
• /
• 2010

Since 1987, when statistical analyzing guide for thermal life test of Accelerated Life Test(ALT) was proposed as ANSI/IEEE Std 101, this guide has been used widely for many experiment data. Shim(2004) had done Monte Carlo simulation to compare life of two different systems or materials, based on statistic values obtained from ANSI/IEEE Std 101 data. In this study, a profile analysis is proposed for comparing life of two different systems or materials, and some examples using pre-existing data are given.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.04a
• /
• pp.309-322
• /
• 2007

This paper shows application guide of dependability data from the field, life cycle costing, and maintainability. Moreover, this study introduces mathematical expressions and predictions for reliability, availability and maintainability. This paper also shows compliance test procedures for steady-state availability, and application of Markov techniques.

• Korean Journal of Adult Nursing
• /
• v.22 no.6
• /
• pp.570-581
• /
• 2010

Purpose: This study was conducted to develop a Cancer Patient Guide with patients involvement using evidenced based practice research. The purpose of this patient guide was to help patients undergoing chemotherapy to manage their nausea and vomiting based on evidence. Methods: The design of the research was a methodological study. The participants consisted of seven cancer patients who were asked about their ' need for nausea and vomiting management, and secondly, 16 expert & 15 cancer patients to evaluate the Cancer Patient Guide using the DESCERN tool. Results: 1) Sixty-four relevant research evidences based articles were reviewed. 2) Patients were interviewed as to their needs in controlling nausea and vomiting. 3) The preliminary Cancer Patient Guide utilizing the research evidenced and the cancer patients interviews was then evaluated and revised by the experts and cancer patients. Lastly, the Cancer Patient which included an overview of chemotherapy, pathophysiology of nausea & vomiting, pharmacological and non-pharmacological interventions was finalized with each intervention supported by research evidence and patients' narratives of their experience. Conclusion: The Cancer Patient Guide was developed using evidenced based research and cancer patients in-put and be used to improve patients' self-management skill of nausea and vomiting in chemotherapy. The guide t also provides evidence based patient friendly information and contributes as a baseline data for developing and evaluating evidence-based guide for patients.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.3
• /
• pp.269-280
• /
• 2015

Although BIM has been recognized as one of the main streams that advance the construction industry worldwide, it is difficult to ensure the quality of BIM data due to the problems such as internal errors of BIM tools and lack of guidelines that enhance design quality. Such problems cause designers, constructors, and project owners to hesitate applying it to their business. The main objective of this research is to develop a BIM guide for public project owners that is to be usable at the design phase of the public projects. To meet the objective, the study invited 10 BIM experts from Korean construction industry and operated workshops with focus group interview methodology. As well, a number of BIM guidelines from the BIM advanced countries were reviewed to identify valuable contents for the guide. There are four main parts in the guide developed: BIM design procurement process guide, Request for Proposal development guide for BIM design, BIM execution plan development and evaluation guide, and BIM output and deliverables review and evaluation guide.

• Journal of the Korean Data and Information Science Society
• /
• v.16 no.1
• /
• pp.79-94
• /
• 2005

This study examines which factors affect on Job-Satisfaction of Tour Guide in Korea, perceiving that Job-Satisfaction of Tour Guide affects customer satisfaction, and outcomes of business. In the tourism industry, Tour Guides are one of the most important factors influencing customer satisfaction, because they are one of the key front- line players. Ultimately, the purpose of this study is to present the importance of efficient management for human resources through investigating Job-Satisfaction of Tour Guide. To active purpose of this study, both literatures and empirical research based on Japanese, and Chinese Tour Guides in Korea were adopted and conducted. In conclusion, in order to improve psychological and behavioral outcomes of the Tour Guides, job satisfaction factors have to be improved in many ways and also travel managers should consider them.