• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.191-199
• /
• 2021

A distillation column, which is a main facility of the chemical process, separates the desired product from a mixture by using the difference of boiling points. The distillation process requires the optimization and the prediction of operation because it consumes much energy. The target process of this study is difficult to operate efficiently because the composition of feed flow is not steady according to the supplier. To deal with this problem, we could develop a data-driven model to predict operating conditions. However, data preprocessing is essential to improve the predictive performance of the model because the raw data contains outlier and noise. In this study, after optimizing the predictive model based long-short term memory (LSTM) and Random forest (RF), we used a low-pass filter and one-class support vector machine for data preprocessing and compared predictive performance according to the method and range of the preprocessing. The performance of the predictive model and the effect of the preprocessing is compared by using R2 and RMSE. In the case of LSTM, R2 increased from 0.791 to 0.977 by 23.5%, and RMSE decreased from 0.132 to 0.029 by 78.0%. In the case of RF, R2 increased from 0.767 to 0.938 by 22.3%, and RMSE decreased from 0.140 to 0.050 by 64.3%.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.4
• /
• pp.478-486
• /
• 2021

This report demonstrates a method of generating a chair-side and computer-aided template for implant surgery based on the Top-Down and restoration-driven concept. Compared to the traditional CAD-CAM process which requires multiple steps to be taken between dental clinic and laboratory, this alternative procedure, VARO guide system (VARO Guide, CAD, Pre-Guide, VARO-mill, NeoBiotech, Seoul, South Korea) enables accurate and patient-friendly implant surgery as well as immediate provisional restoration in a single visit. First, bite-registration at centric jaw relation and CBCT were taken using the Pre-Guide. The CBCT data was then reorganized directly through the chair-side CAD, and we could determine the most appropriate 3-dimensional position of implant. The STL file was extracted and put into the chair-side CAM (VARO-mill) to fabricate a VARO. This surgical guide allowed the implants to be accurately positioned into the planned sites within an hour.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.1
• /
• pp.40-49
• /
• 2013

Current service system of the Korea Meteorological Administration (KMA) for blooming date forecasting in spring depends on regression equations derived from long term observations in both temperature and phenology at a given station. This regression based system does not allow a timely correction or update of forecasts that are highly sensitive to fluctuating weather conditions. Furthermore, the system cannot afford plant responses to climate extremes which were not observed before. Most of all, this method may not be applicable to locations other than that which the regression equations were derived from. This note suggests a way to replace the location restricted regression equations with a thermal time based phenology model to complement the KMA blooming forecast system. Necessary parameters such as reference temperature, chilling requirement and heating requirement were derived from phenology data for forsythia, azaleas and Japanese cherry at 29 KMA stations for the 1951-1980 period to optimize spring phenology prediction model for each species. Best fit models for each species were used to predict blooming dates and the results were compared with the observed dates to produce a correction grid across the whole nation. The models were driven by the KMA's daily temperature data at a 5km grid spacing and subsequently adjusted by the correction grid to produce the blooming date maps. Validation with the 1971-2012 period data showed the RMSE of 2-3 days for Japanese cherry, showing a feasibility of operational service; whereas higher RMSE values were observed with forsythia and azaleas.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.2
• /
• pp.63-70
• /
• 2022

Although 2D Object detection has been largely improved in the past years with the advance of deep learning methods and the use of large labeled image datasets, 3D object detection from 2D imagery is a challenging problem in a variety of applications such as robotics, due to the lack of data and diversity of appearances and shapes of objects within a category. Google has just announced the launch of Objectron that has a novel data pipeline using mobile augmented reality session data. However, it also is corresponding to 2D-driven 3D object detection technique. This study explores more mature 2D object detection method, and applies its 2D projection to Objectron 3D lifting system. Most object detection methods use bounding boxes to encode and represent the object shape and location. In this work, we explore a stochastic representation of object regions using Gaussian distributions. We also present a similarity measure for the Gaussian distributions based on the Hellinger Distance, which can be viewed as a stochastic Intersection-over-Union. Our experimental results show that the proposed Gaussian representations are closer to annotated segmentation masks in available datasets. Thus, less accuracy problem that is one of several limitations of Objectron can be relaxed.

• Journal of Intelligence and Information Systems
• /
• v.23 no.2
• /
• pp.123-138
• /
• 2017

Since the stock market is driven by the expectation of traders, studies have been conducted to predict stock price movements through analysis of various sources of text data. In order to predict stock price movements, research has been conducted not only on the relationship between text data and fluctuations in stock prices, but also on the trading stocks based on news articles and social media responses. Studies that predict the movements of stock prices have also applied classification algorithms with constructing term-document matrix in the same way as other text mining approaches. Because the document contains a lot of words, it is better to select words that contribute more for building a term-document matrix. Based on the frequency of words, words that show too little frequency or importance are removed. It also selects words according to their contribution by measuring the degree to which a word contributes to correctly classifying a document. The basic idea of constructing a term-document matrix was to collect all the documents to be analyzed and to select and use the words that have an influence on the classification. In this study, we analyze the documents for each individual item and select the words that are irrelevant for all categories as neutral words. We extract the words around the selected neutral word and use it to generate the term-document matrix. The neutral word itself starts with the idea that the stock movement is less related to the existence of the neutral words, and that the surrounding words of the neutral word are more likely to affect the stock price movements. And apply it to the algorithm that classifies the stock price fluctuations with the generated term-document matrix. In this study, we firstly removed stop words and selected neutral words for each stock. And we used a method to exclude words that are included in news articles for other stocks among the selected words. Through the online news portal, we collected four months of news articles on the top 10 market cap stocks. We split the news articles into 3 month news data as training data and apply the remaining one month news articles to the model to predict the stock price movements of the next day. We used SVM, Boosting and Random Forest for building models and predicting the movements of stock prices. The stock market opened for four months (2016/02/01 ~ 2016/05/31) for a total of 80 days, using the initial 60 days as a training set and the remaining 20 days as a test set. The proposed word - based algorithm in this study showed better classification performance than the word selection method based on sparsity. This study predicted stock price volatility by collecting and analyzing news articles of the top 10 stocks in market cap. We used the term - document matrix based classification model to estimate the stock price fluctuations and compared the performance of the existing sparse - based word extraction method and the suggested method of removing words from the term - document matrix. The suggested method differs from the word extraction method in that it uses not only the news articles for the corresponding stock but also other news items to determine the words to extract. In other words, it removed not only the words that appeared in all the increase and decrease but also the words that appeared common in the news for other stocks. When the prediction accuracy was compared, the suggested method showed higher accuracy. The limitation of this study is that the stock price prediction was set up to classify the rise and fall, and the experiment was conducted only for the top ten stocks. The 10 stocks used in the experiment do not represent the entire stock market. In addition, it is difficult to show the investment performance because stock price fluctuation and profit rate may be different. Therefore, it is necessary to study the research using more stocks and the yield prediction through trading simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.10
• /
• pp.773-782
• /
• 2020

The development of joint FE models for deep learning neural network (DLNN)-based hybrid FEA is presented. Material models of bolts and bearings in the front axle of tractor, showing complex behavior induced by various tightening conditions, were replaced with DLNN models. Bolts are modeled as one-dimensional Timoshenko beam elements with six degrees of freedom, and bearings as three-dimensional solid elements. Stress-strain data were extracted from all elements after finite element analysis subjected to various load conditions, and DLNN for bolts and bearing were trained with Tensorflow. The DLNN-based joint models were implemented in the ABAQUS user subroutines where stresses from the next increment are updated and the algorithmic tangent stiffness matrix is calculated. Generalization of the trained DLNN in the FE model was verified by subjecting it to a new loading condition. Finally, the DLNN-based FEA for the front axle of the tractor was conducted and the feasibility was verified by comparing with results of a static structural experiment of the actual tractor.

• Asia pacific journal of information systems
• /
• v.17 no.3
• /
• pp.131-146
• /
• 2007

Recently, the role of IT service providers has been enlarged from managing a single function or system to reconstructing entire information management processes in new ways to contribute to shareholder value across the enterprise. This movement toward extensive and complex outsourcing agreements has been driven by the assumption that outsourcing information technology functions is a reliable approach to maximizing resource productivity. Hiring external IT service providers to manage part or all of its information-related services helps a firm focus on its core business and provides better services to its clients, thus obtaining sustainable competitive advantage. This practice of focusing on the strategic aspect of outsourcing is referred to as strategic sourcing where the focus is capability sourcing, not procurement. Given the importance of the strategic outsourcing, however, to our knowledge, there is little empirical research on the relationship between the strategic outsourcing orientation and outsourcing performance. Moreover, there is little research on the factor that makes the strategic outsourcing effective. This study is designed to investigate the relationship between strategic IT outsourcing orientation and IT outsourcing performance and the process through which strategic IT outsourcing orientation influences outsourcing performance, Based on the framework of strategic orientation-performance and core competence based management, this study first identifies core competency orientation as a proper strategic orientation pertinent to IT outsourcing and IT outsourcing process management capability as the mediator to affect IT outsourcing performance. The proposed research model is then tested with a sample of 200 firms. The findings of this study may contribute to the literature in two ways. First, it draws on the strategic orientation - performance framework in developing its research model so that it can provide a new perspective to the well studied phenomena. This perspective allows practitioners and researchers to look at outsourcing from an angle that emphasizes the strategic decision making to outsource its IT functions. Second, by separating the concept of strategic orientation and outsourcing process management capability, this study provides practices with insight into how the strategic orientation can work effectively to achieve an expected result. In addition, the current study provides a basis for future studies that examine the factors affecting IT outsourcing performance with more controllable factors such as IT outsourcing process management capability rather than external hard-to-control factors including trust and relationship management. This study investigates the major factors that determine IT outsourcing success. Based on strategic orientation and core competency theories, we develop the proposed research model to investigate the relationship between core competency orientation and IT outsourcing performance and the mediating role of IT outsourcing process management capability on IT outsourcing performance. The model consists of two independent variables (core-competency-orientation and IT outsourcing process management capability), and two dependent variables (outsourced task complexity and IT outsourcing performance). Comprehensive data collection was conducted through an outsourcing association. The survey data were analyzed using a structural analysis method. IT outsourcing process management capability was found to mediate the effect of core competency orientation on both outsourced task complexity and IT outsourcing performance. Further analysis and findings are discussed.

• The Journal of Bigdata
• /
• v.6 no.2
• /
• pp.71-84
• /
• 2021

Since small and medium-sized enterprises fell short of the securement of technological competitiveness in the field of big data and artificial intelligence (AI) field-core technologies of the Fourth Industrial Revolution, it is important to strengthen the competitiveness of the overall industry through technology commercialization. In this study, we aimed to propose a priority related to technology transfer and commercialization for practical use of public research results. We utilized public research performance information, improving missing values of 6T classification by deep learning model with an ensemble method. Then, we conducted topic modeling to derive the converging fields of big data and AI. We classified the technology fields into four different segments in the technology portfolio based on technology activity and technology efficiency, estimating the potential of technology commercialization for those fields. We proposed a priority of technology commercialization for 10 detailed technology fields that require long-term investment. Through systematic analysis, active utilization of technology, and efficient technology transfer and commercialization can be promoted.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.271-280
• /
• 2019

Smart factory, a critical part of digital transformation, enables data-driven decision making using monitoring, analysis and prediction. Predictive maintenance is a key element of smart factory and the need is increasing. The purpose of this study is to analyze the degradation characteristics of a galvanizing kettle for the steel plating process and to predict the remaining useful life(RUL) for predictive maintenance. Correlation analysis, multiple regression, principal component regression were used for analyzing factors of the process. To identify the trend of degradation, a proposed rolling window was used. It was observed the degradation trend was dependent on environmental temperature as well as production factors. It is expected that the proposed method in this study will be an example to identify the trend of degradation of the facility and enable more consistent predictive maintenance.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.4
• /
• pp.323-330
• /
• 2003

GIS-based applications for route guidance are increasingly developed recently, but most of them are for self$.$driven cars. Although some of them are intended for public transportation, they show limitations in dealing with time constraints problems taken place in transfer areas. Developing a public transportation guidance system requires the fallowing aspects: (i) people may change transportation means not only within the same type but also among different modes such as between buses and subways, and (ii) the system should take into account the time taken in transfer from one mode to the other. This study suggests the framework for developing a public transportation guidance system that generates optimized paths in the transportation network of mixed means including buses, subways and other modes. For this study, the Genetic Algorithms are used to find the best routes that take into account transfer time and other service-time constraints. The method for constructing the data structure in the GIS was also suggested.