• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.185-192
• /
• 2011

More practical outputs and insights can be obtained through transportation analysis considering the time-dependent traffic movements. This study proposes a method of constructing time-dependent O-D trip tables for expressway corridor using real-world individual trip data. In this study, time-dependent O-D trip tables for the nationwide highway network are constructed based on toll collection system data. The proposed methodology is to convert nationwide time-dependent O-D trip tables into Korean expressway corridor O-D trip tables in order to deal with the computational complexity arising from simulating a large-scale traffic network. The experiment results suggest that actual individual trip record data can be used to effectively construct time-dependent O-D trip tables. They also imply that the construction of time-dependent O-D trip tables for the national highway networks along with those for Korean expressway developed in this study would make transportation analysis more practical and applicable to real-time traffic operation and control.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.67-70
• /
• 2006

KARI is developing Image Data Acquisition and Control System (IDACS) for pre-processing meteorological and ocean data acquired on geostationary orbit. This paper describes the functions and architecture of IDACS and gives its operation policy including backup operation to overcome limitation of single-configured antenna system. The COMS IDACS provides the capability to receive the raw sensor data and disseminate processed MI data to users via a satellite. From the processed image data, users can produce a set of meteorological and ocean products for a wide range of applications. Most of IDACS subsystems are being developed by Korean technologies and experience acquired from previous projects. In case of COMS geometric correction software module, as it is closely dependent on the characteristics of imagers and spacecraft bus system, it is being co-developed with overseas prime contractor who develops spacecraft bus system.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.10a
• /
• pp.12-16
• /
• 1998

The purpose of this paper is to develop a knowledge-based real-time decision support system to support decision makers for efficient berth operation of Inchon Port. In these days, the efficient berth operation has been many studied. The berth operation rules differ from port to port and the problem is highly dependent on natural, geographical and operational environment of port. In Inchon Port, the ship's entrance into port and departure from port is extremely affected by the status of dock and berth because of capacity restriction. First, we analyzed the specific characteristics of Inchon Port such as dock based on the data of 1997. And then, we construct the database of experts knowledge for berth utilization. Finally, we build the real-time decision support system for the efficient berth operation of Inchon Port to make the better berth allocation in case of not only regular scheduling but also dynamic scheduling such as delay in berth operation and exchange of ship between berths. The DSS is developed with graphic user interface(GUI) concept to help the user determining user interactive updating of the port status. Then this DSS will be provide decision maker with an efficient and fast way to berth allocation, and reduce wastes of time, space, and manpower in Inchon Port operation.

• Clean Technology
• /
• v.29 no.2
• /
• pp.145-150
• /
• 2023

Tele-metering systems have been useful tools for managing domestic wastewater treatment plants (WWTP) over the last decade. They mostly generate water quality data for discharged water to ensure that it complies with mandatory regulations and they may be able to produce every operation parameter and additional measurements in the near future. A sub-big data group, comprised of about 150,000 data points from four domestic WWTPs, was ready to be classified and also analyzed to optimize the WWTP process. We used the Statistical Product and Service Solutions (SPSS) 25 package in order to statistically treat the data with linear regression and correlation analysis. The major independent variables for analysis were water temperature, sludge recycle rate, electricity used, and water quality of the influent while the dependent variables representing the water quality of the effluent included the total nitrogen, which is the most emphasized index for discharged flow in plants. The water temperature and consumed electricity showed a strong correlation with the total nitrogen but the other indices' mutual correlations with other variables were found to be fuzzy due to the large errors involved. In addition, a multilayer perceptron analysis method was applied to TMS data along with root mean square error (RMSE) analysis. This study showed that the RMSE in the SS, T-N, and TOC predictions were in the range of 10% to 20%.

• Journal of the Korea Society for Simulation
• /
• v.3 no.1
• /
• pp.167-178
• /
• 1994

For the identification of the optimal operating conditions of phosphoric acid plant, an intelligent simulation was performed based on the dissolution reaction of phosphate rock. A phosphoric acid plant consists of three main processes : ball-mill grinding process, rock reaction process and slurry filteration process. The grinding and filteration processes are relatively simple processes and most of the simulation works are on the reaction process. The practical operation data of phosphoric acid plant at Namhae Chemical Corp. were utilized in the simulation. The operation of the phosphoric acid plant is highly dependent on the heuristics of operators and so the expert system technology was employed. The operation of phosphoric acid plant varies with the origin of phosphate rock. Results of the simulation showed the optimal values of major process variables and optimal operating conditions. The knowledgebase for the expert system was constructed based on the interview with the experienced plant operators.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1746-1751
• /
• 2007

The bullet train runs more than 200km/h so that it is invisible to the naked eye. For this reason, KTX solely dependent on the ATC operation system. Above all things, 'stability' and 'regular time' are essential to Train Control Operation system. But intermittently, there is a signal transmission problem between ATC operation facilities and ground equipments. which is caused by wheel sliding and friction coefficient between wheel and rail when the train starts. This paper analyzed train service data for one year for accurate survey. In addition, this thesis examines the main cause of a signal transmission problem through simulation and experiment. Further, the method to solve the conventional problem is presented.

• Journal of the Korean Society of Food Culture
• /
• v.17 no.5
• /
• pp.584-593
• /
• 2002

The purpose of this study was to evaluate the diet quality of the menus delivered by 17 free meal service centers for the low-income home-bound elderly in Chung- cheong buk-Do. Statistical data analysis was compleleted using the SPSS package program for descriptive analysis, T-test, and ANOVA. The meals offered by free meal service centers were not met the 1/3 recommended dietary allowances in calcium and vitamin $B_2$. There were significant differences between dependent variables(nutrient content, nutrient density, nutrient deficiency, NAR, MAR, food group intake patterns) and independent variables (operation type, operation status, operation period, nutritionist, food cost).

• Journal of Korean Port Research
• /
• v.13 no.2
• /
• pp.189-198
• /
• 1999

The purpose of this paper is to develop a knowledge-based real-time decision support system to support decision makers for efficient berth operation of Inchon Port. In these days the berth operation problems have been many studied. The berth operation rules differ from port to port and the problem is highly dependent on natural geographical and operational environment of port. In Inchon Port the ship’s entrance into port and departure from port is extremely affected status of dock. In this paper we analyzed some effects of dock a specific character of Inchon Port with a real data of ship’s in Inchon Port. And reconstruct a previous expert’s knowledge of berth allocating problem in Inchon Port. Also the mechanism for the efficient berth operation has been studied by repeatedly dispatching in order to obtain a best effect of berth allocation, with real-time updated information for delay at service time of a specific berth and changing of a working-berth. The system is developed with graphic user interface(GUI) concept using user interactive approach. And this system will be provide decision support maker with an efficient and fast way to berth allocating and reduce wastes of time space and manpower in Inchon Port operation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.6
• /
• pp.132-140
• /
• 2003

In this paper, we propose a new scheme for view-dependent transmission of three-dimensional (3-D) polygonal mesh models with hierarchial partitioning. In order to make a view-dependent representation of 3-D mesh models, we combine sequential and progressive mesh transmission techniques. By setting higher priorities to visible parts than invisible parts, we can obtain good qualify of 3-D models in a limited transmission bandwidth. In this paper, we use a multi -layer representation of 3-D mesh models based on hierarchical partitioning. After representing the 3-D mesh model in a hierarchical tree, we determine resolutions of partitioned submeshes in the last level. Then, we send 3-D model data by view-dependent selection using mesh merging and mesh splitting operations. By the partitioned mesh merging operation, we can reduce the joint boundary information coded redundantly in the partitioned submeshes. We may transmit additional mesh information adaptively through the mesh spritting operation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.18-22
• /
• 2009

Short-term load forecasting (STLF) is an important task in power system planning and operation. Its accuracy affects the reliability and economic operation of power systems. STLF is to be classified into load forecasting for weekdays, weekends, and holidays. Due to the limited historical data available, it is more difficult to accurately forecast load for holidays than to forecast load for weekdays and weekends. It has been recognized that the forecasting errors for holidays are large compared with those for weekdays in Korea. This paper presents a polynomial regression with data mining technique to forecast load for holidays. In statistics, a polynomial is widely used in situations where the response is curvilinear, because even complex nonlinear relationships can be adequately modeled by polynomials over a reasonably small range of the dependent variables. In the paper, the coefficient of determination is proposed as a selection criterion for screening weekday data used in holiday load forecasting. A numerical example is presented to validate the effectiveness of the proposed holiday load forecasting method.