• Journal of the Korea Society for Simulation
• /
• v.18 no.1
• /
• pp.35-40
• /
• 2009

The reliability of processing the distributed application becomes more and more important issues in distributed network as the usage of distributed network increases. Because the distributed network applications are processed in the available resources of Internet. It is important factors that the user can efficiently access the available resources and processed results can be delivered to the user of job request. Therefore in this paper, we suggested the survivability factor for sending data safely whether it can be efficiently accessed between the user and available resource which processes the distributed application. And evaluated the performance of the suggested factor using the data transmission time. Also we suggested the transmission algorithm for safe transmission using the survivability factor.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.1
• /
• pp.27-32
• /
• 2017

This paper presents a Daubechies wavelet-based fault detection method for fault identification in transmission lines. After the Daubechies wavelet coefficients are calculated, the proposed algorithm has been implemented difference equation using C language. We have modeled a 154kV transmission line using the ATPDraw software and have acquired test data. In order to evaluate effects of DC offset, simulations carried out while varying an inception angle of the voltage $0^{\circ}$, $45^{\circ}$, $90^{\circ}$. For performance evaluation, fault distance was varied. As we can see from the off-line simulation, the proposed algorithm shows rapid and accurate fault detection. Also we can see the proposed algorithm is not affected by the fault inception angle change.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.3
• /
• pp.471-489
• /
• 2013

Data compression at the transport layer could both reduce transmitted bytes over network links and increase the transmitted application data (TCP PDU) in one RTT at the same network conditions. Therefore, it is able to improve transmission efficiency on Internet, especially on the networks with limited bandwidth or long delay links. In this paper, we propose an on-the-fly TCP data compression scheme, i.e., the TCPComp, to enhance TCP performance. This scheme is primarily composed of the compression decision mechanism and the compression ratio estimation algorithm. When the application data arrives at the transport layer, the compression decision mechanism is applied to determine which data block could be compressed. The compression ratio estimation algorithm is employed to predict compression ratios of upcoming application data for determining the proper size of the next data block so as to maximize compression efficiency. Furthermore, the assessment criteria for TCP data compression scheme are systematically developed. Experimental results show that the scheme can effectively reduce transmitted TCP segments and bytes, leading to greater transmission efficiency compared with the standard TCP and other TCP compression schemes.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.3
• /
• pp.62-73
• /
• 2012

IEEE 802.15.4 standard which has low-speed, low-power, low-cost can be efficiently used in wireless sensor network environment. Among various topologies used in IEEE 802.15.4 standard, a cluster-tree topology which has many nodes in it, transmit delay, energy consumption and data loss due to traffic concentration around the sink node. In this paper, we propose the MRS-DCA algorithm that minimizes conflicts between packets for efficient data transmission, and dynamically allocates the active period for efficient use of limited energy. The MRS-DCA algorithm allocates RP(Reservation Period) to the active period of IEEE 802.15.4 and guarantees reliable data transmission by allocating RP and CAP dynamically which is based on prediction using EWMA. The comparison result shows that the MRS-DCA algorithm reduces power consumption by reducing active period, and increasing transmission rate by avoiding collision.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.4
• /
• pp.136-141
• /
• 2011

In this paper, we propose an approach to improve the data detection performance of the acoustic data transmission system based on the modulated complex lapped transform (MCLT). We first present an effective analysis of the features and the detection method of data in the acoustic data transmission system. And then feature vectors which are applied to the Gaussian mixture model (GMM) are selected from relevant parameters of the previous system for the efficient data detection. For the purpose of evaluating the performance of the proposed algorithm, Bit error rate (BER) of the received data was measured at different environments (music genres (rock, pop, classic, jazz) and different distances (1m∼5m) from the loudspeaker to the microphone in a office room) and yields better results compared with the conventional scheme of the acoustic data transmission system based on the MCLT.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.2
• /
• pp.234-242
• /
• 2002

In this research, a transmission control unit was developed for a wheel loader on the basis of 16-bit microcontroller system. The TCU has the basic functions which include shifting control algorithm, actuation of six proportional solenoid valves, signal conditioning for four speed sensors, remote data monitoring capability with RF-module and duty cycle identification system which could identify the duty cycles from PWM signals. In order to design the control system, the overall transmission structure of the wheel loader was investigated and its characteristics of shifting were analyzed in advance. For the purpose of identifying the existing control algorithm and acquire some information about the shifting performance, the shifting experiments were performed for various shifting conditions with the conventional TCU. From the previous work on the conventional TCU, the shifting scheme was designed with the open-loop control which is based on the experimental data only to verify the feasibility of the developing TCU's shilling capability. The experimental results show comparable shifting characteristics to that of conventional TCU though the tests were performed at restricted shilling conditions. Hence, we could have the confidence for the development of the wheel loader automatic transmission TCU and its shifting quality could be improved with the adoption of appropriate feedback control scheme.

• Journal of KIISE:Software and Applications
• /
• v.32 no.12
• /
• pp.1238-1246
• /
• 2005

This thesis is written with web security module for safe data transmission between heterogeneous systems(ex. OS). Web system has allowed users to have great convenience and a lot of information. Though web service business has been progressed much, because of the limitation of it's own system, lots of loss, derived from data spillage which is the weakest point of security, has also followed. Suggested security module is realized by two module. One for server security module for web server, the other is client security module for client. The security structure, suggested on this thesis guarantee safe data transmission by only simple installation of modules in clients and servers. for speed sensitive transmission between web server and browser, Triple-DES, symmetric encryption system suitable for fast encryption communication, is adapted. To solve problems caused from key management, Diffie-Hellman's key exchange algorithm is adapted. By this method, all symmetric encryption troubles from key distribution and management, speed could be work out a solution. And Diffie-Hellman type algorithm secures Authentication for safe data Protection.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.7
• /
• pp.914-920
• /
• 2003

In this paper, we deal with two drift compensation algorithms of acceleration sensor for measuring the galloping on power transmission line. Firstly, the block diagram of galloping measurement system is given and a galloping model is presented. Secondly, two compensation algorithms, a simple compensation and a period compensation, are proposed. A simple compensation algorithm uses the drifts of velocity and distance at fixed periods, so it is useful for constant drift case. Next, a period compensation algorithm can compensate a periodic drift. This algorithm uses the previous measured data and compensated data for constant period, where the period is obtained by FFT method. Lastly, the effectiveness of proposed algorithms is verified by comparing between two algorithms in simulation, and its characteristics and the drift error bound are shown, respectively.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1998.06b
• /
• pp.5-9
• /
• 1998

In this paper, we propose an error-resilient transmission technique for the H.263 video data stream over wireless networks. The proposed algorithm employs bit rearrangement hierarchically, providing the robust and exact synchronization against the bit errors, without requiring extra redundant information. In addition, we propose the recovery algorithm for the lost or erroneous motion vectors. We implement the encoder and decoder, based on the H.263 standard, and evaluate the proposed algorithm through intensive computer simulation. The experimental results demonstrate that the proposed algorithm yields good image quality, in spite of the channel errors, and prevents the error propagation both in the spatial and the temporal domain efficiently.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.459-465
• /
• 2014

Recently, multimedia data transmission becomes important issues in the wireless sensor network. For the multimedia data transmission in wireless sensor network, QoS (Quality of service) is an important factor to determine the system performance. AODV algorithm is one of the widely used algorithm for wireless ad-hoc environment. In AODV, the destination node selects the route with the smallest hop count. Since AODV only considers the hop count, the selected route could have low channel condition, and degrade QoS. In this paper, we propose a modified AODV algorithm that considers the successful transmission rate of each link. The proposed algorithm regards the number of retransmission which can be obtained from the successful transmission rate as the hop count, and applies the modified hop count to AODV. The advantage of the proposed algorithm is that the modified AODV can support QoS without significant change of the conventional algorithm.